Your cart is empty.
Your cart is empty.
Included in the Kit:
10 of 9.5 mm Clamp, Part No. 16700004
10 of 11.3 mm Clamp, Part No. 16700007
10 of 13.3 mm Clamp, Part No. 16700010
10 of 14.5 mm Clamp, Part No. 16700013
10 of 15.7 mm Clamp, Part No. 16700016
Genuine Oetiker Clamps
Stainless Steel, Material no. 1.4301/UNS S30400
What is StepLess Technology?
Oetiker invented the StepLess ear clamp in 1979. The ear clamp’s special design eliminates steps and/or overlaps on the inner circumference of the clamp for a 360° leak-free seal. Because the tongue resides in a groove, the “tongue-in-groove” feature exerts pressure on the assembled parts over 360°, enabling the clamp to apply a continuous radial force completely around the connection’s diameter.
Mechanical interlock
The interlock is a mechanical system for joining the clamp ends to permit closure. Some interlock designs can be opened for radial installation prior to closure.
Clamp diameter
The following applies as a guideline: To determine the correct clamp diameter, push the hose onto the attaching material, (e.g. the nipple), and then measure the outer diameter of the hose. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. The listed size of the clamp denotes the inner diameter (id) of the clamp.
How to Install
These clamps can be easily installed using Oetiker Hand Installation Pincers (HIP). The HIP tools have been designed especially for pinching ear clamps quickly and easily.
Oetiker HIP Compound Action, Standard Jaw Pincer, Item No. 14100386
Oetiker HIP Compound Action Side Jaw Pincer, Item No. 14100387
Oetiker HIP Single Action Standard Jaw Pincer, Item No. 14100396
How to Remove
Ear clamps can be easily removed using Oetiker’s hand clamp cutter (HCC). The HCC tool is designed to safely remove ear clamps.
Oetiker Hand Clamp Cutter, Item No. 14100407
Please Note: The clamps included in this kit are not designed or intended for use in PEX applications. The sizing references for PEX clamps are not the same as standard Oetiker clamps. Oetiker PEX Clamps should be used for PEX applications.
Michael Peterson
Reviewed in the United States on July 7, 2023
Connecting hose
Hugh G. Rection
Reviewed in the United States on February 20, 2023
These appear to be genuine Oetiker SS clamps and not aftermarket equivalent. Non-magnetic. Match my old clamps exactly *except* now marked "OET" and not "OETPAT". The case received is a bit different (nicer) than shown. Perfect for all of the sizes I typically use. These stepless clamps are so much better than worm drive universal clamps for tubing and small hoses. I only use the genuine OE Oetiker brand (as does H-D).
Customer
Reviewed in the United States on September 1, 2017
I would have liked to have gotten black ones.
R. Appleyard
Reviewed in the United States on December 15, 2017
Order arrived timely and exactly as described.
Dudlydoright
Reviewed in the United States on October 5, 2017
Nice selection. Worked properly with the tool
Derek
Reviewed in the United States on August 7, 2015
These clamps are good size and quantity. I didn't need a bag of 100 of all one size, I like the smaller quantity assortment. These clamps are not stamped as stainless steel, I would hope they are because I think they are most useful on hoses to contain water. They are slightly magnetic, using a very strong rare earth magnet they will stick to it with light force. The clamp is the split type clamp, it is stamped from one strip of metal and curved into a circle. It has small edges that hold the clamp together. Other clamps I have used are one piece of continue metal. The difference is that the one piece have nothing to get stuck on.For the price this is a great set and great assortment/qty.
Dmitry
Reviewed in the United States on November 12, 2015
Very nice quality box. The clips are okay as well
Recommended Products
$24.49
$ 10 .99 $10.99
$24.49
$ 11 .99 $11.99