Your cart is empty.
Your cart is empty. SPDT contact form (1C).
Coil Voltage: 12 VDC
Contact Form: SPDT (1 Form C)
Mounting Style: Through Hole
Contact Material: Silver Tin Oxide (AgSnO)
Series: G8QN
Power Consumption: 685 mW
Fully sealed construction.
Fully automated assembly.
G8QN suitable for reverse motor applications
High performance PCB relay.
Phantom37
Reviewed in the United States on August 3, 2023
I was very pleased with all of the packaging protecting this relay and keeping the pins from being damaged. I was able to replace the original relay on my 2003 Ford Expedition fuse box motherboard for the fuel pump and it works now after needing to create an oops connection with no fault to this relay.
Ryan
Reviewed in the United States on September 6, 2022
Ran a wire from the positive on battery to the 4 pin connector which I unplugged.. stuck it in the slot with the green wire with yellow stripe. 4x4 lights blinked the whole way home however it got me home when I was stranded. Good way to diagnose a relay problem before you remove the gas tank for no reason. Be sure to order a fuel filter with this! as it is usually caused by either a clogged filter or a fuel pump that is going bad and getting over worked.2003 expedition eddie bauer 5.4L
Britknee
Reviewed in the United States on February 25, 2021
Worked perfectly for a 2004 Ford Expedition Eddie Bauer edution!
Mary C Melanson
Reviewed in the United States on February 5, 2020
fixed my truck
J-Son’s Auto and Racing
Reviewed in the United States on August 22, 2019
My bad rating is NOT due to the quality of the part, but that it isn’t the correct part. It says it fits my vehicle. However, it’s too big and just wrong. Make sure to check which relay you have mine uses the omron G8N-H1 micro relay.
john smith
Reviewed in the United States on March 25, 2019
Great replacement for 2003 expedition xlt fuel pump relay that melted and burnt out. Soldered it in and works like new.
L. Hartley
Reviewed in the United States on December 26, 2019
Save us a boat load of money and works like a charm.
Jake - Eagle Point, OR
Reviewed in the United States on April 1, 2019
This relay was exactly what I needed. I was having stalling issues and no check engine light. I took the rig to my mechanic who has a very expensive scan tool. He was able to pull a memory code of P0231. I was able to solder this relay into the circuit board of the central junction box (fuse block), saving the $400 not buying a new fuse block. Getting the fuse box out of the car and disassembled to remove the circuit board was more work than removing and re soldering in this relay. I am happy I chose to do this repair myself as it was very cheap, pretty easy, and only took 1.5 hours. Youtube is a great source for how to video.
Recommended Products
$18.88
$ 7 .99 $7.99
$11.99
$ 5 .99 $5.99
$169.48
$ 70 .99 $70.99