Your cart is empty.
Your cart is empty.Performance Tool W89726 Master Fuel Injection Test Kit to quickly and accurately diagnose fuel injection problems, and includes adapters for most foreign and domestic fuel systems. Includes universal inline adapter for unique systems. Set includes: 0-100 PSI (0-7.0 bar) gauge with boot & hang up hook, GM 2.5L & 5.7L fuel injection pressure test adapter, hose clamps and hose, GM throttle body injection (TBI) fuel pressure adapter, seals, tank valve, gasket, single & double end barbed hose adapter, 6mm-1.00 Honda & Acura multi-port (PGM-FI) adapter, 8mm-1.00 and 10mm-1.00 Banjo bolt adapter, 12mm-1.25 Banjo bolt adapter, 12mm-1.50 Banjo bolt adapter, 14mm-1.50 Banjo bolt adapter, 8mm-1.00 long adapter, 8mm-1.00 female adapter, 8mm-1.00 male adapter with "O" Ring (2pcs), 8mm-1.00 male adapter (long), 10mm-1.00 female adapter, 10mm-1.00 male adapter, 12mm-1.50 female swivel adapter (2pcs), 14mm-1.50 male & female swivel adapter, 1/4" BSPT male & female swivel adapter, 16mm-1.50 male & female swivel adapter, pressure testing and bleed-off assembly, Small Schrader valve test adapter for Ford, Large Schrader valve test adapter for GM & Chrysler, 5/16" hair pin adapter for Ford CFI, 3/8" hair pin adapter for GM & Chrysler, Spring lock adapter for Ford EFI and CIS testing assembly with ball valve.
Berry
Reviewed in the United States on July 27, 2024
The reviews here are not for the Performance Tool Master Fuel Injection Test Kit.Very odd.Nonetheless, Iām having trouble with the barbed adapters leaking or not flowing at all.Quite frustrating when attempting to diagnose a fuel injection system.
S.A.
Reviewed in the United States on July 24, 2023
PARTS CAME IN A NICE CASE. THERE ARE AN ABUNDANCE OF ATTATMENTS NEEDED FOR DIFFERET MAKES OF VEHICLE APPLICATION. WE ARE EXCITED TO USE IT.
steel curtain
Reviewed in Canada on August 22, 2021
The crimps on the various adapter hoses leak.
Customer
Reviewed in the United States on October 22, 2020
This tester is very poor quality, most of the adapters don't fit properly, hoses leak right out of the box. would recommend spending your money on a different tester.
lovetoteach
Reviewed in the United States on August 21, 2019
Went to use the 10mm tester bolt. As soon as I tried to screw it in, it came apart right in my hand. I bought the kit for the 10mm and now it's pretty much useless.
jaime
Reviewed in the United States on November 22, 2017
Replace all rubber hoses with quality fuel injection hose!!! Was getting ready for test drive with gauge hooked up an hose started leaking wtf!! U can twist hoses and they tear... Otherwise set looks decent for price , u get what u pay for...
Tony Presley
Reviewed in the United States on September 2, 2015
Very nice for the price
J CC
Reviewed in the United States on May 8, 2014
You get what you pay for in this case.If you are buying this tool for limited personal use and NOT mixing Schrader valves with other tools, it performs the task. It measures significantly better than the Extreme Power Master Fuel set, and is similar to the other sets found online, but it is not a professional grade tool.Schrader is a trademarked brand and is only referenced here because it is the "standard" for this tool set. The valves on this set are not 100% compatible. Now that I think on it, it may not work without leakage if you are just trying to test fuel pumps, and or pressure fittings. Unless you remove the valve and use open hose to open hose clamps over top of the valves.There is a glob of glue in the T connectors, that I do not have knowledge of, or whether the glue will dissolve in gasoline or solvents used to clean fuel systems. I am concerned that the glue can damage an injector if it were to break loose and float downstream. The glue on the connectors is completely unnecessary and I point this out because it is a foreign substance you might introduce to your fuel lines.If I continue to use this set, I will take all the fittings apart and try to remove foreign substances with solvent. Not worth the time to do this for a single use test set. If you are using this in a shop setting, take the time to clean the tool of that glue and use Teflon tape instead.Fuel systems are best left to the professionals, but if you are needing this tool set, it is significantly more useful than a standard pressure test kit, and is not professional grade (limited use and compatibility with other valves).
Aaron Bien
Reviewed in the United States on December 5, 2014
Works Great
Recommended Products
$326.05
$ 99 .00 $99.00