Shopping Cart

Your cart is empty.

Your cart is empty.

Planet Bike Hardcore Bike Fenders, 700c x 45mm , Fits Up to 35mm Tires

Free shipping on orders over $29.99

$59.99

$ 30 .99 $30.99

In Stock

About this item

  • Max tire width is 35mm or 1.25". These fenders require that your bike includes eyelet mounts. Please review before purchase.
  • Classic polycarbonate plastic design includes front safety tabs for added safety.
  • Does not fit all disc brake compatible bikes.
  • Pre installed hardware makes for easy installation on your bike if all other requirements are met from sizing and need for eyelets.
  • Mud flaps provide additional 40mm of coverage and are double-riveted for durability.


The hardcore full coverage fenders have been keeping rain, mud and Snow off the backside of cyclists for decades. They look great and their rugged all-weather construction lets you comfortably go for a ride even if the weatherman is calling for rain.


Tim W
Reviewed in the United States on July 21, 2024
I have a comfort style bike and have been wanting to set it up as a more commuter type bike. Without fenders even with after a rain the tires would spray water from puddles. I decided to get fenders for the bike and based upon the reviews and the pricing decided to get these fenders. My concern in getting them was that I would be putting them on a bike that had tires larger than were recommended. The tires on the bike are 700x38c. the specs list the largest size as 35. I decided to try them so I put them on and have ridden with them on and have not noticed any problems with them. There appears to be sufficient clearance so I am not worried about using them. They took about 45 minutes to install. Front tire went very quickly and rear tire slower since I needed to remove the rear tire. Adjustments were easy and they look great. So it looks like I will be able to keep from being sprayed. Look forward to going through my first puddle.
Customer
Reviewed in Saudi Arabia on November 18, 2024
مقاس المنتج مناسب جدا لدراجة تركن TX2) وسهل التركيب ، وثابت بشكل جيد على الدراجة انصح به
Rodons
Reviewed in the United States on June 19, 2023
The Planet Bike Hardcore Hybrid Fenders deliver exceptional performance, offering superior protection and durability for any biking condition.Pros:- Protection: They effectively shield from mud and water, keeping you clean during rides.- Durability: The fenders are robust and withstand various weather conditions.Cons:- Installation: The setup can be slightly tricky but manageable with a bit of patience.- Appearance: Some might find them less aesthetically pleasing, but their functionality outweighs this minor drawback.Despite minor cons, the superior protection and robustness of these fenders make them a fantastic investment for any bike rider.
Roberto Sánchez Contreras
Reviewed in Mexico on April 4, 2022
Excelente producto
Robert in Denver
Reviewed in the United States on July 26, 2021
I have a Schwinn Circuit hybrid that I turned into a makeshift gravel bike last year. The fine grit from the local trails is really wearing on my drivetrain so I thought I'd try a set of fenders. Because I have to haul them around, I wanted some that were lightweight and not obtrusive, appearance wise.I chose these based on their size and published weight. These are advertised as being 700c x 45mm. I misunderstood that when I bought them, to mean they would fit atop 700cx45mm tires. That's not the case. Planet Bike recommends tires 35mm or smaller.I didn't have any trouble with installation. All of the mounting points were there on my Schwinn. The only exception to this being the seat-stay mount. The one that comes with the kit is designed for a bike with rim brakes. My bike has a mount in stay instead. I drilled a small hole through the fender and bolted it to that.Like others, I used my own hardware. The hardware that comes with the kit is just fine quality wise and it would have served the needs perfectly. But I wanted hardware that uses Allen head bolts so that's why I used mine.The only difficulty with installation, and this is minor, is that I had to shape one of the struts for the rear fender to clear the brake caliper. I suspect these fenders are designed for a rim-brake bike.There is enough clearance in the rear for my 35mm Cross Boss tires. The front is a little tight as the fork I'm using doesn't have a lot of clearance near the crown. I do get some rocks making noise as they roll around on the inside of the fender and I'd like more clearance in the front. I may have to modify the fender a bit to give some more clearance at the fork.Looks wise, I think they are okay. I like the look of the bike better without them, but if I'm going to run fenders, these aren't bad style wise.I would recommend them. Be prepared to use a bit of ingenuity when you set out to install them. And remember, there isn't any sort of design standard for bicycles when it comes to fender mounts. Each bike manufacturer does it differently. It's not fault of Planet Bike if these do not fit your bike perfectly.I've included a lot of photos so you can see how they mounted to my bike and get an idea of what to look for on yours before ordering to make sure the fit.
Jose
Reviewed in Canada on January 12, 2021
This product it’s awesome and easy to install.
Juan Manuel
Reviewed in Mexico on July 17, 2020
Llego en perfecto estado, facil de instalar
Dennis
Reviewed in the United States on January 19, 2016
The one thing I think is important to note about these is that the dual metal braces on the back fender are separate single metal spokes with a loop at the end. This means that you need to buy a longer bolt to connect them, if you also have a pannier or other carrier on the back. On my previous set of fenders for my commuting bike, the dual bracing was a single strand of metal that looped around the fastening bolt, taking only half as much bolt length to connect. Also, the fasteners that come with this set are rather cheap things that you connect with a screwdriver instead of an Allen wrench, and they do not look like stainless, but rather cheap metal possibly with a galvanized coating. I used the ones from my old set that are stainless Allen bolts. Also some of the end connectors are bulky plastic instead of metal. Other than that they seem OK, but I just installed them yesterday, so i will wait and see.
Kyle
Reviewed in Canada on October 18, 2014
they work very good ! they fit perfect on my bike
PCB
Reviewed in the United States on October 21, 2011
I bought these fenders to replace a nearly identical set that I have had on my hybrid for several years. The front fender on the old set was destroyed when some large object, probably a rock, got jammed between the wheel and fender and locked the wheel as I was starting from a stop in loose gravel. I must not be the only person having this problem as they now come with a simple plastic quick release which mine didn't have.I have well over 5000 miles on the old set including road, paved and unpaved rail trails and occasional rides on unimproved paths in the woods. I have been entirely satisfied with the old ones which is why I bought the same kind as replacements.I used them with 38mmn tires for a couple of years in spite of the fact that they are rated a maximum width of 35mm. Although I did use them with those tires they were critical to adjust and needed frequent attention, clearance was almost zero and something as simple as the bike falling over would bend the stays slightly and require adjustment. Also because of the close fit the mud flaps tended to get pulled into the fender and they eventually broke off. The 35mm limit is real.Now using them with 35mm tires and there have been no problems. Great for rides on rail trails with puddles, snow melt runoff on early spring rides and rides in the rain.Installation is easy. I have a rear rack and the fenders fit under it easily.
Recommended Products

$15.59

$ 7 .99 $7.99

4.5
Select Option

$35.99

$ 17 .99 $17.99

4.8
Select Option