Shopping Cart

Your cart is empty.

Your cart is empty.

Polished Brass Metal Cable Grommet | 2 Piece 'Lock in' Feature with 'Brush' Opening for Management of Office & Computer Desk Wires | 60mm (2 3/8') Hole Opening | 1 Pack

Free shipping on orders over $29.99

$12.99

$ 5 .99 $5.99

In Stock

About this item

  • VERY IMPORTANT! - For best results use a 60mm hole saw. YOU WILL FIND IT RIGHT ON THIS PAGE!
  • HEAVY DUTY CONSTRUCTION - Made from die cast zinc. Polished brass finish compliments any décor.
  • "BRUSH" WIRE OPENING - Nylon bristles center & protect your wires while creating a refined appearance.
  • E-Z INSTALLATION - Just bore a 60mm (2-3/8") hole... insert… DONE!
  • 2 PIECE DESIGN - Hides the raw edge of your desk. Top half "locks into" lower half with a slight clockwise turn. - 1 Grommet


Jewelry for your desk!
Whether you're outfitting a brand new office, or are looking to enhance the appearance and efficiency of your existing work space, wire grommets from Desunia can help. Available in a variety of finishes, our grommets are easy to install, look fantastic, and will tame any jumble of wires into a neat and tidy grouping.
Beautiful Finishes
Our grommets are made from die-cast zinc, the perfect base material to support our exquisitely crafted finishes.
2 Piece “Lock-In” Design
Most desk grommets are sold as "single piece", which means the raw edge of the desk top is always visible in the spot where the wires go through. The 2-piece nature of these grommets offers a much more refined appearance. Once the hole is bored, the first part is installed. This is a full circle ring, without any breaks. Then, after the wires are routed through, the top portion is put in place, and with a slight clockwise turn, snaps in nice and secure.
Larger Size = Lots of Room
The outer ring has an inside diameter of 2-1/16", which is plenty of clearance for just about any plug that has to pass through. The space for the wires is a generous ¾” x ¾”.
”Brushed” Wire Opening
This is a really unique feature we know you’ll love. The actual wire opening is lined with a ring of nylon bristles. Besides creating an even more refined look, this helps keep to protect your wires by keeping them away from the metal edge of the grommet.
Installation Tips
For best results, use our 60mm hole saw (be sure to do a test run on a piece of scrap first). Once you’ve bored the hole, you should wind up with a nice, precise fit.
Here's what you get...
One die-cast metal grommet with ¾” x ¾” brushed opening - Polished Brass


Koiman
Reviewed in the United States on March 4, 2025
I spent an embarrassingly long amount of time trying to find a suitable grommet for this custom furniture project and this is what I settled on. This thing is solid as can be and very high quality. Considering how cheap it is I didn't think it was gonna be solid metal and super rigid. The wood worker working on my project asked for me to send him the link to this so he can buy some for himself. The fit was perfect and easy to install, a perfect value, functions as it should and it looks very professional. Would absolutely buy again.
Wobbles
Reviewed in the United States on June 7, 2024
This is made from good solid materials and looks extremely high quality - Good value purchase
Amanjot
Reviewed in the United States on September 10, 2023
I didn’t end up needing this for my project but kept it anyway. The finish is lovely and the product is heavy and sturdy. If I find I need this hardware in the future, I’m glad I have it.
Jessica Greenwood
Reviewed in the United States on April 4, 2022
This is a very nice heavy duty grommet. It actually has 2 pieces and you can remove the inside piece to fit larger plugs through. Very well made and the color/finish is also nice. The installer had no issues installing this into the hole he cut in the desk.
Aaron Newman
Reviewed in the United States on September 12, 2021
WhenI purchased this, I looked at the specks and ordered a hole saw to match the description. When cutting the hole and placing the grommet in the hole, I found it to be loose fitting. Also the depth of the grommet is low profile. I wish it had been deeper, and slightly larger for a more snug and secure fit. The weight is good, due to it being solid metal. Also I was glad to know that a quarter twist locks the top plate into the grommet, as without that it wouldn't stay in place well. I am using outside on a covered porch to run power under the deck to our grill. So far I am happy, not sure if it'll eventually rust or not.
Gavin
Reviewed in Australia on July 5, 2021
It was hard to find a premium looking grommet. This one fits the Bill.
Barnett family
Reviewed in the United States on May 5, 2020
Product came as described. I'd say the only issue is the "brush" opening. It is a little tight and will restrict access if you want to run numerous cable/wires through it. I have my PC power cord and monitor power cord going through it and I could probably fit one more similarly sized power cord through and that would be about it. Otherwise a top quality grommet that isn't plastic and looks better because of that fact.Oh yeah. I used a 2 and 3/8's drill hole and it fit fine.
B&C
Reviewed in the United States on March 25, 2020
We have a very nice executive style desk in our den however it didn't have a hole to run cables (for monitor and speakers). This piece matched our desk well and drilling was easy using the circular drill bit (sold separately). The only gripe I have, and its a small gripe, is I wish either the diameter of the grommet was slightly bigger, or the drill bit was slightly smaller. Reason being - When I drilled the hole, the grommet simply rested in there. There is a VERY slight wiggle to the grommet. If the grommet was bigger, or hole smaller, it would require just a tad but of pressure to push the grommet in which would make for a nice tight fit that would prevent the wiggle or having the grommet rotate if a cord was pulled. But still...this is one of those things you just install once and probably will never have to touch it again...so it's not a big deal, but doesn't make this 100% perfect...more like 95% perfect.
Prime Lover
Reviewed in the United States on March 2, 2016
The desk we purchased didn't have convenient holes for our computer cords, so we decided to drill a hole and insert a grommet. I absolutely love this purchase - it looks as though it came with the desk. The first thing we like about it is that it is two pieces. When we were looking at desks to purchase, the salesman highly suggested a two piece grommet because it protects the exposed wood under the grommet. Though, in theory, you shouldn't have to take the grommet in and out very often, when you do having it as two pieces means that the piece that stays in the actual hole takes the wear and tear instead of the wood. The second thing we like is that the grommet is metal. We purchased a plastic one and immediately sent it back because in our expensive desk, it just looked cheap. This grommet is sturdy and looks great. I highly recommend. Though we don't have any plans to drill more holes into our furniture (smile!), if we do, I know which grommet I will buy!
Recommended Products