Your cart is empty.
Your cart is empty.
The Precision Brand M-S series Micro Seal stainless steel miniature worm gear clamp has a stainless steel band, housing, and screw, and are a miniature size for fitting small hoses in confined spaces. A worm gear mechanism adjusts the clamp’s diameter to precisely apply sealing pressure. The 5/16" band and housing are made of stainless steel that conforms to the Society of Automotive Engineers (SAE) 300 series standard and provides resistance to corrosion. The slotted, 5/16” hex-head screw allows installation using a blade screwdriver, nut driver, or socket wrench. The screw is made of SAE 400 series stainless steel that Is resistant to corrosion.
Hose clamps attach hoses to fittings to prevent flow leakage. They come in a variety of designs and distribute uniform pressure over the circumference of hoses to bind them to fittings. Hose clamps are suitable for a large number of industries, and commonly used in industrial, electronic, and automotive applications.
Precision Brand Products manufactures products such as hose clamps, shims, keystock, threaded rods, punch and die sets, and wire. The company, founded in 1946 and headquartered in Downers Grove, IL, meets International Organization for Standardization (ISO) standard 9001.
CB
Reviewed in Canada on June 8, 2021
used them in my campervan worked great and less expensive than HD
Israel C.
Reviewed in Mexico on July 11, 2019
Excelente
Randolph M. Beaudry
Reviewed in India on March 25, 2019
These worked when other, softer steel products failed and began to strip. Sealed some difficult fittings. I would buy again.
Radhika
Reviewed in India on February 27, 2018
good
Zuriel Salim González López
Reviewed in Mexico on February 19, 2018
El producto es nuevo y soporta el peso del fermentador lleno. Altamente recomendable, lo volveria a comprar si requiero mas
Mr Smith
Reviewed in the United States on September 19, 2016
have already started using these hose clamps. I have been working a lot with replacing, setting up and reinstalling an electric air compressor in my shop. I have also been doing a lot of work with pressurized garden sprayers and specialized spraying equipment. Many of the parts and accessories I have been using come from a local Tractor Supply Company.I was horrified one day when I went to use on of the forty-pack of assorted hose clamps that I purchased from Tractor Supply's "discount table". I can not imagine how angry I would be if I was really relying on those clamps to get me out of a serious breakdown situation. The "forty-pack" turned out to be garbage. Whenever a moderate amount of torque was applied to the hose clamp it failed. The band twisted and broke. The screw tore right through the soft metal of the hose clamp banding material. This was truly awful. I wrote the company and explained how shoddy the quality was. I have since seen similar reviews on "discounted" forty-pack hose clamps in other stores. At least I know now to stay away from any of that bargain basement junk especially when it comes to an item that I might really truly be relying on to get me out of trouble.I said all of that as a comparison to these high quality hose clamps that I have purchased from this seller. They are top shelf products and I have successfully used them in high pressure air hoses and high pressure water hoses. All repairs are doing well.
BILL BIXLY
Reviewed in the United States on March 19, 2016
Reviewing the smaller sizes, with 1/4" screw size "mini clamp" ~ unlike many of the 1/4" drive "mini" clamps, these are really tough and superior in quality, strength and sealing capabilities. HIGHLY RECOMMEND! No reason to suspect the larger ones would be any less in excellence of craftsmanship.These can handle that "extra turn" to bring an end to the all too common dribbling hose or hissing air realized when using many of the Chinese and other imported clamps. Well worth the cost for a clamp that seals and STAYS sealed. No side tracking, slipping, stripping or jumping in the worm drive when cranking out that necessary extra turn.Another WIN! for Amazon!
N
Reviewed in the United States on January 31, 2016
The Precision Brand M4S Micro Seal, Miniature All Stainless Worm Gear Hose Clamp, is well made and is aligned with the quality that you would expect for the price of this product. The quality across the ten hose clamps contained in this order was consistent. There are no obvious sharp edges.This item arrived in a small (but appropriately sized) box, packaged within an evelope, the packing seems to be good enough to priotect the product.I intend using these hose clamps to fasten a cargo basket ( to my Specialized Sirrus bicycle, to the rear mounted .I purchased this product myself with no discount, I will update if these hose clamps have any issues with failing in the application that I intend to use them for.
RC
Reviewed in the United States on May 16, 2015
At $4 for a 10pk I'd give them 4.5 stars if I could... One of those items that, once you get, you can't believe you ever went without them. I've been going around putting them on every hose that I'm even slightly concerned about... Fuel vapor lines that move just a little bit, an EXACTLY 7/8-inch O.D. (probably 3/4-inch I.D.) radiator hose (heater bypass hose) that was leaking a little coolant with the old spring-action hose clamps, and much more. They really hold when you tighten them down, and I haven't stripped one yet, as I have with some hose clamps. I did have one where the screw housing got loose, but was able to bend everything back into shape and keep on using it.For those larger hoses, you can even daisy-chain these. Two of these end-to-end will fit 1-3/4" hose, and three will hold a 2-5/8ths hose. It takes quite a bit of work bending them for the larger size, and a larger hose clamp is the better option, but it'll do, in a pinch, when you don't have the luxury.Nice and cheap and durable, with plenty of extras to carry around.
supahonkey
Reviewed in the United States on July 5, 2012
These are very high quality and very reasonably priced American made hose clamps. I went to Autozone and was appalled at the $4.99 price for 5 hose clamps that were made in China (read: junk) and were made of zinc coated steel. These clamps are 100% made of stainless, meaning they work perfect for my outdoor use of them. The most important thing is that the screw doesn't slip on the teeth in the clamp. Buy these hose clamps; not only will you save money but you will be supporting American jobs!
Recommended Products
