Your cart is empty.
Your cart is empty.
Conveniently control four X10 receiver modules with an X10 wall switch by installing the X10 PRO 4-Button Keypad Plus Transmitter Base Kit. The in-wall keypad enables manual control for four X10 receivers on the powerline. Hit one side of a rocker switch to turn its corresponding receiver on, and hit the other side to turn it off!
- Provides On/Off control for four X10 receivers
- Connects to Hot and Neutral wires
- Mounts in a single-gang wall box
The "behind-the-scenes" transmitter base mounts in a single-gang wall box and connects to Hot and Neutral wires. The included keypad attaches to the face of the transmitter, providing a clean, elegant appearance.
How It Works
The transmitter base can control multiple X10 receivers by running the Unit Number Addresses in sequential order. In other words, if you have the dials on the transmitter base set to House Code B and Unit Code 4, the keypad's four buttons will control the X10 receivers set to House Code B and Unit Codes 4, 5, 6 and 7. The top button will control Unit Code 4, the next button below will control Unit Code 5, and so on.
Contents
- Wall Transmitter Base Module
- 4-Button Keypad
NOTES
- Wallplate not included.
- Due to X10 Product changes, these Transmitter Bases are not compatible with Transmitter Bases sold before July 2007.
Technical Details
- Power Supply: 120VAC at 60Hz
- Consumption: 2 Watts
- Color: White
- Manufacturer Part No: XPT4-W-NS
- UPC: 099081510188
H. J. Cusanek
Reviewed in the United States on January 29, 2024
Although this unit does not have the remote device on/off indicator lights, it functions as expected. I would prefer the indicator lights but for my purposes this device meets my needs.
Carlo Weickert
Reviewed in the United States on January 31, 2023
This is the newer generation of these transmitters. They function equally as well as the previous model. Unfortunately, the switch faces are a different size than the previous ones so you can't use the previous labels and protective covers to identify the function of the switch. There is so little clearance on the new units that I don't think there is any room to put covers on if they were available.They do work.
mikey
Reviewed in the United States on May 20, 2022
My old 4 button wall transmitter just stopped working, so I got this to replace it. Works fine except for one problem. One of the outlets it controls has a high current relay and its protocol must be somewhat different. Anyway this new controller does not control that outlet, but does work with the other 3. The old 4 button transmitter worked fine with that outlet. Other controllers also still work with that outlet. But this transmitter is basically a 3 button unit for me.
R. Adams
Reviewed in the United States on July 18, 2021
I've used X10 products for more than 40 years and some of the original units are still in service. These 4-button keypad transmitters are really convenient. For whatever reasons, my existing 4-button controllers are a little less reliable than other X10 (and X10 PRO) units. They have an annunciator LED showing which unit code is active which is very helpful, but this style, by Leviton, has been discontinued.The XPT4-W-NS is an adequate substitute and even though my existing ones are beige instead of white, it's not worth the extra $8 each from another site.Even though there have been "better" systems using similar but incompatible technology on the market for some years, I'm still completely satisfied with the X10 PRO series of components.
Michael
Reviewed in the United States on January 11, 2019
I have an old Leviton DHC home automation system. This X10 Pro transmitter and keypad works very well and is highly responsive with a soft touch of the button. No longer need to hurt my fingers to turn the lights on or off.Update:The keypad stopped working after 2 months of use. Turns lights off, but doesn't turn them on. I changed the keypad and it now works.
Caesar
Reviewed in the United States on April 21, 2019
Works - I hope they start offering in it off white (ALMOND) to match other units
alexmtn
Reviewed in the United States on September 14, 2017
This product works totally as billed, and I'm happy with it.A great feature to add would be a little switch or jumper to flip the ON and OFF positions of the buttons as a group (alternatively, think of this as an ability to reverse the sequence of codes transmitted by the 4 switches from top to bottom -- i.e., ascending or descending).
Mr. Pizza
Reviewed in the United States on May 1, 2017
Worked fantastic! I installed it in the garage next to the entry door to the house for convenience. It turns on a couple of outside LED lights on another building. Transmits about 100 feet through a metal garage door and into the other building. Very pleased!
Recommended Products
