Your cart is empty.
Your cart is empty.From the manufacturer
Profile Designs Boxer Bar End
Brief and Boxer Bar Ends improve leverage and reduce hand fatigue by increasing hand position versatility for a more comfortable and customized MTB fit. 6061-T6 aluminum construction gives them a sturdiness that keeps you in control the entire ride.
Profile Design
Since 1988, Profile Design has been setting the standard in innovation, creating cycling components designed for speed. For nearly three decades, Profile Design has been pushing the limits and making the bold moves to increase cycling performance on the sport’s most captivating stages. Cyclists turn to Profile Design for compelling, detail-oriented products engineered for superior handling, aerodynamics, adjustability and fit.
El Doc Thor
Reviewed in the United States on January 19, 2025
Incredible deal for the quality of these habdle extensions. Tge screw to tighten the grip to handlebar is ore lubricated, and the tolerance on the product is excellent. Function wise, these handle extensions really change the experience when riding, gives me more leverage and options for control when riding . I am able to place my full weight on them and they did not shift, I am 6'0 240lb. Highly recommended.
Kirk Markarian
Reviewed in the United States on August 7, 2024
I really like the way the handle extensions can be used for a more 'upright' ride. My bicycle is a Brooklyn Franklin 3, upright step-through. Very easy to sit up, but the handlebars don't extend back as far as I'd like I was still hunched over a bit, and would rather sit fully upright and be able to hold the handlebars. Placing these on a near-flat angle, aiming towards me, allows for a more 'true' upright riding position. Very nice. They feel durable and they fit right on the handlebars with no issue. Very easy to install and hold their position.
Keith Fritzinger
Reviewed in the United States on August 26, 2024
They mount securely and don't move on the handle bar. Angle of the top part of grip is just right. The plugs included to cap the end of the handle bars was a very tight fit and I had to use a hammer to get them fully installed (maybe a bit of soap would have helped them in). Well worth the money
Joe H
Reviewed in the United States on December 9, 2024
These are easy to install and are comfortable
Scott Taylor
Reviewed in the United States on October 30, 2024
These are well made, light weight, have a bit of texture on the surface, mount easily and perfectly, and came with rubber end inserts installed plus a spare set of two more.
Daniel A. Lundy
Reviewed in the United States on October 20, 2024
I had some old bar ends that were too short, but these are the perfect length to give me an additional handlebar position.
Dr Guillermo Munro A
Reviewed in Mexico on July 6, 2021
Muy buen producto x su tamaño para manos xl o xxl ,peso muuuy ligero y fácil colocación
Émile
Reviewed in Canada on June 27, 2021
I bought these for my 2002 Devinci Rio after considering switching to drop bars and I'm glad I went with this option. They were really easy to install, very sturdy, product feels like quality. Also they don't say it anywhere in the description but there are endcaps included with the bar ends for your stock bar, which was really nice because I'm missing one.The tube these are made of is slightly larger diameter than the handlebar, to allow people to use them without any grip or handle tape I assume. My stock bar grips were getting really old and falling apart so I tried blending the bar ends onto the handlebar with handle tape, it turned out great.Also one thing to note is the clamping area on these is quite narrow, compared to other bar ends I've seen they seem much easier to fit and the clamp area flows beautifully into the tube piece, rather than being a rough welded construction like other alternatives.Overall very happy with my purchase, they give a lot of hand position options and allow for much more natural positions when going fast or climbing a hill.
YONG MENG FAI, EDDIE
Reviewed in Singapore on October 3, 2021
Lots of hand positions. 😊Fast delivery.
AW
Reviewed in the United Arab Emirates on September 6, 2020
Excellent as expected
Phil J
Reviewed in the United States on November 3, 2019
Bought this for a bike tour cause I had flat bars and stupid grips. It was an absolute necessity and worked great for my trip, actually took the grips off completely and wrapped about 1.5-2 feet of grip tape around the whole thing, from the shifters to the tips of the bar ends This way I was able to use at least three positions that kept my hands from going numb, basic bar grip, outside at the corners grip, and then a top grip on the bent part of the bar ends at the top. Definitely light material and on a 1200 mile use so far on that tour have not moved a mm since I installed them. Very happy that I bought these. I have normal sized hands and I can say they were bigger than I needed, in fact they really stick up and almost look intimidating to get hit with, they give the bike a more aggressive look. I'm posting a pic to show what you can do, I wrapped the tape around the whole corner, it wasn't perfect but it did work as a grip and didn't move, I'll redo it later, the duct/electrical tape in the pic is like that cause this was a modification on the road, I had already done the tape at the top and was running out.
Allison & Dunn
Reviewed in the United States on March 18, 2014
Bought these to give me a few different positions for my hands while riding my bike.PROs:1) Feel sturdy-I've been using for about 2 weeks and so far, they are well made and have not slipped one bit2) Easy to Install. Simply slide over your rubber handle bar grips and slide these on the end, adjust to desired angle and tighten. I'd recommend re-tightening after a few rides just to ensure that they're still tight.3) Finish is DURABLE- On first ride with them installed, I wrecked. Bike was resting on the left hand bar-end. Not one scratch. My friend who has a set from Specialized couldn't get over it and kept saying "I can't believe they didn't scuff all up!"No Cons. Don't get me wrong...the plastic plug in the end of the bar-end could be a little higher quality and could be a little more flush cut to the bar-end's shape, but for under $18, I'm not going to split hairs. They work great, look great, and are inexpensive...period
Wiebke 1950
Reviewed in Germany on September 29, 2013
Habe diese Barends schon an mehreren Rädern verbaut..Gebrauchtauglichkeit und Qualität sind gut,Ist auch für den härteren Radeinsatz durchaus zu empfehlen.
Recommended Products