Your cart is empty.
Your cart is empty.PylePro Model : PLPTS45
Laptop & Studio Equipment Dual Holder
Laptop, Mixer & Studio Equipment Stand Holder Tabletop Mount, Universal Dual Device Placement, Adjustable
Features:- Includes (2) Universal Device Holding Bracket Arms
- Provides Convenient Access to Two Separate Devices
- Holds Laptops, Mixers, Turntables, Sound Equipment, etc.
- Quickly and Easily Make Height, Rotation and Tilt Adjustments
- Both Bracket Arms Feature Width, Depth and Height Adjustment
- Rotary Clamp-Style Locking Mechanisms
- Fully Rotational, 360° Swivel Ability
- Device Tilting Adjustment: 0° - 75°
- Can Hold up to 17.0'' Laptops
- Low-Profile Heavy Duty Base
- Safe & Secure Device Placement
- Rugged & Reliable Steel Construction
- Can Be Placed On Top or Under Other Equipment
- Perfect for On Stage and In-Studio Use
- For Beginner and Professional Applications
- Used by Musicians, Instrument Players, Performers, Sound Engineers, DJ, MC, etc.
- Assembly Instructions Included
- Can Hold Devices as Small as 2.0'' Wide
- Weight: 9.0 lbs.
Size/Dimensions:
- Tabletop Base (L x W x H): 15.0" x 9.8" x 0.2" inches
- Adjustable Height (Device Holding Arms): 3.5" to 15.7" inches
- Total Unit: 24.5'' x 11.0'' x 16.0'' inches
Reach new levels in your music performance, and gain convenient access to your gear, with the Pyle PLPTS45 Dual Device Tabletop Studio Equipment Stand. It's the heavy duty solution to hold all your audio equipment. The dual device mount holder arms are height adjustable and can raise or lower your gear from 3.5" to 15.7". Universal bracket arms are also width adjustable so it can hold devices like laptops, mixers, turntables and more. Enjoy 360 degree full rotation swivel adjustments along with device tilting ability. This heavy-duty tabletop stand provides rugged and reliable performance -- all within arm's reach! Adjust, position and angle your equipment exactly where you need it, and achieve optimum performance with the Pyle PLPTS45 Dual Studio Equipment Stand.
CBWBrooklyn
Reviewed in the United States on March 6, 2025
Nice idea, but trash execution. All the fittings are *so* much bigger than the support pole that there's an incredible amount of slop in the joints, so everything is hopelessly slanted. Even the fitting at the base, which is closer (but also a different diameter than the other fittings, for some reason) couldn't be shimmed well enough to remain properly perpendicular. They really didn't care when they sent this out of the factory...
Allie’s Honest Reviews
Reviewed in the United States on March 14, 2024
This stand is very athletically pleasing and it works so well I am able to get additional space on my desk with both my laptops lifted up. It has really changed the look of my desk and I love it so much! I only wish I would have purchased it sooner but I really love seeing it so awesome every day. It is solid, sturdy and great looking. I really like this stand! I hope this helps!
Customer
Reviewed in the United States on December 18, 2024
Radio, Club, Festival, or home studio setup this Pyle unit will satisfy for many styles and needs. Durable. Solid design.
Shann
Reviewed in the United States on October 27, 2024
Great to set up laptops and sturdy. Adjustable as well to make it easy to move to different areas on desk.
David
Reviewed in Canada on October 21, 2024
Fits 2 XDJ 700s perfectly if you're looking for a cheap stand for them. I don't like the asymmetric/offset base but for the price I can live with it. Other people said their bases were warped, but mine was fine.
Jim Bob
Reviewed in the United States on August 20, 2023
Holds a PV10AT & ASUS 17in laptop just fine. I use it all the time, the only issue I've began to have after a year of heavy mobile use 3 of the knobs are wearing out. I tend to over tighten them, not their fault! Looking for replacements, all metal ones but no luck so far.For my uses it's perfect. I run 2 hosts at every event and there's an 18 in difference in our height. I run sound and the other runs the software for karaoke and trivia. I can have the mixer at my lvl and laptop at hers. HUGE PLUS for me also:Leave the bottom knob by the base loose (not off) and the stand rotates freely! If i get bombarded with singers by the DJ booth I'll just spin it around and host from the other side of the booth and she still has access to the laptop on her side with the twist of a knob.WAY BETTER THAN THE VERSION LISTED ON SWEETWATERS SITE TOO!
Sean
Reviewed in Canada on July 21, 2023
Im docking and hot switching between two laptops, and needed a solution to have both laptops open on a desk already covered in monitors etc. This is the solution. 1 laptop up, the other on the base. Both 17 inches. Perfect solution.Went together in minutes, is sturdy and the base is heavy enough to support the laptop sitting at the top of the post.
Dom
Reviewed in the United Kingdom on June 12, 2023
A really nice looking stand. Easy to assemble. Holds 2 x laptops firmly with adjustable height and tilt. However, the base unit is not flat and rocks from side to side because it's slightly curved. I've tried bending it but the metal (likely steel or something similar) is a few millimetres thick - so it's impossible.Now wondering whether to go through the hassle of returning it.
First Last
Reviewed in the United States on April 12, 2022
It is easy to assemble, easy to adjust, and it is sturdy enough to hold two of my 17 inch laptops. The top laptop shelf can be placed high enough that my third 17" laptop can easily fit underneath it.I would have given it 5 starts except for 2 issues that were easily corrected.1. The bent section of metal on the flat metal bars that the laptop sits on, that were designed to keep the laptop from sliding off the front of the unit, failed to work for my HP laptop. The HP laptop has a rounded front edge and it would ride up and over the metal tabs. I flattened out the factory tabs and re-bent them about 1/4 inch longer and now they hold the HP laptop in place. A simpler solution, for someone without access to the tools to re-bend the metal bars could be to just put something slightly taller in front of the tabs.2. As others have reported, the computers didn't sit level, the ends of the computers that are farthest from the pole are lower. I shimmed up the metal bar that supports the laptop on the far ends with about 10 or so mm of washers and replaced the bolt that holds the metal bar with a longer one (to compensate for the thickness of washers). Now the laptops are level.Overall I'm very pleased with this stand. I now have simultaneous access to all 3 of my laptops.
Benny
Reviewed in the United States on August 2, 2021
This stand is amazing. I use it to hold my laptop and my portable microphone system. It works so well and I could not be happier.
a customer
Reviewed in Singapore on March 27, 2021
The product is very sturdy and infinitely adjustable in terms of height.Virtually the entire product is made of metal and there is very little plastic.However owing to the limited space between the trays and the poles, accommodating a larger laptop (15" or larger in display size) may be problematic.The trays are similarly adjustable in terms of depth, width, and angle, and this adjustability may be harnessed in case the laptop's ports are blocked by the pole at a certain depth setting.
Jay1ner
Reviewed in the United States on May 21, 2020
Very good and sturdy stand. Well built! I use it for my Ableton Push 2 and Presonus Faderport 8. Works flawlessly. Also love that I can adjust height settings and angles.
Aero
Reviewed in Australia on April 16, 2020
Very solid and a lot heavier than expected
Recommended Products
$1,199.99
$ 99 .00 $99.00
$129.99
$ 50 .99 $50.99
$74.99
$ 36 .99 $36.99