Your cart is empty.
Your cart is empty.
Qenker 2-Player LED Arcade DIY Kit for USB MAME PC Game DIY & Raspberry Pi Retro Controller DIY
Attention Buyers:
We update the diy kit into new version that will help you much easier to finish your diy projects.
All the LED Buttons will be bigger size (Drill Holes from 28mm to 30mm for the LED buttons)
1: Make sure the joystick have connected to the right 5Pin slot that the one opposite the USB-B slot.
2: About the Ball Top Handle.Please use a slotted screwdriver fixed the bottom of the Joystick Shaft to screw the ball top handle down and make sure it will not easy to loose.
We are trying to provide a high quality arcade diy parts. Trust us. The joystick not the best one but it's a good quality joystick if you installed it well.
The Joystick Gaming Experience will changed if you change another type restrictor. We can provide gt-8f (B07GDGLVKX) & gt-c round restrictor(B07GDH78K9).
Compatible model
Win8/Win7/Vista/XP/2000/98, Linux, MAC OS, Android. Raspberry Pi 1/2/3/3B Retropie Arcade DIY Projects,MAME DIY projects,USB MAME cabinet arcade DIY projects & PC controller computer game etc.
Package Included：
2x Zero Delay LED USB Encoder
2x USB Cable
2x 5Pin wires for Joystick
20x 3Pin wires for LED Push Buttons
10x Red 28mm LED Push Buttons
10x Blue 28mm LED Push Buttons
1x Red 5Pin 8 way joystick
1x Blue 5Pin 8 way joystick
1x Install Description
PD
Reviewed in Canada on February 21, 2024
Works as described .Good value.
Roblynn
Reviewed in Canada on November 1, 2023
Essentially easy to install with a little bit of know how. My only wish was for the wires to be longer. Other than that, this is a great set of sticks and buttons.
mark
Reviewed in the United States on October 18, 2023
Honestly, I'm a button snob, and these are not quite up to my standards, however they are a very good value and they use the connection method that modern controllers use, so for ease and value they are top notch. As a person who grew up in arcades, I like the positive feeling of an old-school dipswitch button, but as far as I know, they are not made to be hooked up with modern arcade controller boards, say for a Raspberry Pi.
Scott
Reviewed in the United States on February 28, 2021
For the money, this was hard to pass up. The buttons are responsive and the joystick works well. This was also very simple to set up, just having to plug in each button to the board.My only gripe with this is that two of the LEDs were burnt out, which was discovered when it was first powered up.
Kindle Abuser
Reviewed in the United States on January 24, 2021
I bought this set to mod an arcade 1up machine. This was my first time attempting a project like this. Installation was easy. My buttons only have one 3-pin connector so I didn’t have to daisy chain LEDs, but the way I understand it is that not all sets are like this.I noted that two buttons stuck immediately upon testing and they had to be replaced. Thankfully you get a few extras if you have a 6 button layout so this wasn’t a major issue.Next problem I noted was one of my LEDs did not light up on the red side. I replaced that button only to discover a new red button had gone out. After replacing the 2nd button all lights are on and no problems since then a week in. Im not sure if they were faulty LEDs or bad connections.My biggest complaint with this kit are the joysticks. They are very loose and phantom inputs are a problem. I’ve only noticed this one my 1 player stick so far but it’s the one that gets the most play and as mentioned before I’ve only had these for a week. I replaced the stock springs with 4 lb springs (you can find videos on YouTube on how to do this) and this helped some, but the phantom inputs are still there. It’s honestly only a matter of time until the other stick wears out. Keep in mind I’m a 30 something and I’m not spending 8 hours a day 7 days a week putting these sticks through their paces.Why the 3 star rating then? Because these were cheap, easy to install, and they get the job done albeit with some flaws. If you can deal with those flaws it’s worth the money, but personally I’ll be upgrading to higher quality parts sometime in the near future.
MonicaTechReviews
Reviewed in the United States on September 6, 2020
The media could not be loaded.
Darran Want
Reviewed in the United Kingdom on December 20, 2020
Swapped the original sticks and buttons on my Arcade1up cab as part of a conversion and although these look nice with the led lighting they are no improvement to the original in terms of playabilty.
Go California
Reviewed in the United States on October 7, 2020
eh there using a new design with good plugs way better than the last three i got stick with it this was so legit and easy to set up no two plug that goes in janky just a nice one 3 prong to board this is the best way the three previous ones i got im probly gonna throw in trash and re order the new design of one plug per button and leds work just from that so clean u guys LOVE IT!!!!!!!!
Kenn Wislander
Reviewed in the United States on July 14, 2019
Was looking for a set of controllers to use with my Raspberry Pie for a retro arcade build I was making. Thought I would give this set a chance. Twenty buttons, two joysticks, two controller cards, and all the wires and USB cables you would need to get them to work. It was nice that they were well illuminated. If you are handy with wiring, and have a bit of patience this is a pretty solid set for the weekend DIYer. Not sure if they would work well as a commercial grade set of controllers, but they work great for what I needed them for.
Cliente de
Reviewed in Mexico on July 14, 2019
Lo materiales se veia y sentia muy bien, excelente producto, a mi me sirvio para mi proyecto arcade.
Michael Mercado
Reviewed in the United States on May 6, 2019
These were used to replace my 1up Arcade sticks and buttons. They are decent quality for what you pay for. The buttons don't click like a classic arcade button, but sturdy nonetheless. The led effect is pretty awesome.My only advice is to make sure not to have any positive/negative ends touch on the daisy chained led wires. If you have extras not being used and they are touching, it'll temporarily short the chain out, and the buttons won't light up. Cover exposed ends that are not being used.
M. P. Wing
Reviewed in the United States on March 30, 2019
Great kit and great value for the money. Setup is fairly easy if you make sure you plug all the cables into the appropriate slot shown on the back of the controller boards. Great kit if you want to use to modify the arcade1up cabinets to provide more buttons and joysticks.
Issac Lopez
Reviewed in Mexico on October 5, 2019
todo muy bien y llego super rapido, segun serian dos meses pero tardo menos de dos semanas, el unico problema es que la placan no es para botones led, supongo que tengo que buscar la manera de darles corriente para que enciendan
Recommended Products
