Your cart is empty.
Your cart is empty.Product Description
Product Description
The RAP-B-201U-A consists of a short double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length of 2.42", this is the lowest profile RAM double socket arm size. The easy-to-adjust knob allows for near-infinite adjustability for your connected device.
B Size Components
All B Size Ball components accommodate 1" diameter B Size sockets
Common Mounts Using B Size:
- Phone Mounting
- GoPro Mounting
- GPS Mounting
C Size Components
All C Size Ball components accommodate 1.5" diameter C Size sockets
Common Mounts Using C Size:
- Tablet Mounting
- Laptop Mounting
- Small/Medium Sized Fishfinders
D Size Components
All D Size Ball components accommodate 2.25" diameter D Size sockets
Common Mounts Using D Size:
- Large Fishfinders/Chartplotters
- TV Mounting and Large Monitors
- Forklift Mounting Solutions
glenn
Reviewed in the United States on March 4, 2025
RAM is one of the first companies that produced these for whatever you want to use them for, so they're the industry standard as far as quality. They're all sized to use the same dimension (like 1 inch) so you can mix or match components as you wish, or change the length of the connector to better suit your job with confidence. These short connectors work for just about anything, and they're less expensive now than they ever were before. I like how easy it is to take them apart and reassemble, thanks to those little springs allowing you to push the ball-head into the connector without having to juggle or have an extra hand. The hold is adequate, but as you use them that only becomes better as the balls become more rounded and roughened-up on a surface-level for a better grip.
Cody
Reviewed in the United States on February 25, 2025
Easy to use, lightweight, nice design, fits just right for Ram Mounts. Not sticky.
Teresa Agne
Reviewed in the United States on February 21, 2025
Works great
Sip
Reviewed in the United States on July 26, 2024
If you are looking to buy this, you pretty much know exactly what it is and why you need it. Ram mounts are great and this piece is no different. Made well and works just as advertised.
Harri
Reviewed in India on June 4, 2024
Ram mounts are high quality. I ordered two components and they arrived separately. Took two weeks and two and a half weeks to come.
joel pinay
Reviewed in Canada on March 29, 2024
Very good just as advertised and easy to install thought it would be a bit longer but works for what I’m using it for.
Lance
Reviewed in the United States on March 25, 2024
Looks to be okay quality. But as I don't have my case, I still have not used the item. Will update when I get the rest of the stuff.
Gutscho
Reviewed in Germany on December 31, 2024
Die RAM Mount Produkte erfüllen absolut die beworbenen Features. Ich benutze verschiedene Systeme in Kombination mit Mikrofon-Stativen und Laptop haltern für diverse Rock Shows. Unglaublich flexibel und absolut stabil! Alle Einzel-/Ersatzteile nachbestellbar und konfigurierbar.
UJM81
Reviewed in the United States on November 21, 2024
I recently changed from a BMW R1200RT to a Triumph Trophy. One thing I liked about the RT was the ability to mount my 8" Oukitel tablet on the OEM GPS mount using an adapter. I found the Triumph's GPS mount placed the tablet too high, so Ion the suggestion of a friend, I tried my first ever Ram mount. I used a M6 threaded mount into the steering nut, then this piece, and finally a ball adapter I 3D printed when the one I bought was unavailable. This adapter attaches to a BMW GS GPS mount that provides 2x USB ports, one powers the tablet and the other a controller for my heated gloves. This mounts the tablet low, yet it's still easy to see GPS navigation while riding. The Ram mount is very secure.I'm very pleased with the Ram setup.
Ryan bartholomew
Reviewed in the United States on November 2, 2024
about 200 miles on it so far, works great with my amazon find fork stem mount and tackform 25mm vibemax.
Ander
Reviewed in Spain on April 4, 2022
Compre este kit "Ram Mount Rap-B-201U Kit de Montaje - Kit de Sujección" junto con"RAM Mount RAM-B-272 Kit de Montaje - Kit de sujección" y"AM Mount RAM-HOL-UN7B - Soporte móvil"Lo compre por falta de lugar en el manillar de la moto para poner un accesorio para sujetar el móvil. Con esto me lo ha solucionado completamente el problema, la bola inferior la tengo sujeta con el mismo tornillo que sujeta la pantalla. Con los otros kits puedo acomodarlo para tener el móvil encima de la pantalla de información de la moto.PROS: ➡️Fácil de montar ➡️Se agarra como si fuese cemento aun alcanzando velocidades muy altas no se mueve. ➡️El kit del móvil tiene una goma para poder engancharlo mas aun al enganche del móvil, aunque no es necesario pero siempre viene bien esa seguridad extra.CONTRA: ➡️Por poner pega, le pondría que la casa RAM no tiene un enganche para el móvil con funda para poder protegerlo de la lluvia con este sistema. ➡️Es obvio pero si queréis grabar con el móvil en la moto con este enganche... es prácticamente imposible obviamente, las vibraciones de la moto hace que tiemble la cámara y se vea mal.
Gary Fisher
Reviewed in the United Kingdom on February 26, 2020
At 80 mm centre to centre this mount gives a multitude of position options in my Sprint St fairing; forward back and leaning. The phone is secure at all speeds and dealt with pot holes too.No regrets. Highly recommended. Am going to get a shorter one for my cruiser (no fairing)
Ellis Guy
Reviewed in the United States on May 31, 2014
This is a compact double socket arm. I have several RAM products, including the longer double socket arm and also a RAM Double Socket Swivel Arm for 1" Ball Bases. It all depends upon your install as to what you may require. This product has a shorter range of positional adjustment. The longer double socket arm affords a little larger range of motion, but it sacrifices the shorter length, if that's a factor in one's application. The double socket swivel arm affords more flexibility of range of adjustment, however it's a little more bulky. Each application is different, so it all depends on its requirements and one's sense of utility. RAM also makes double socket arms constructed entirely of metal. In the event that one anticipates mounting fairly heavy devices in situations that may involve vibration, such as in vehicles, it may be well to consider the all-metal double socket arms. They are available directly from RAM on its website. Otherwise, if this item fits one's need in size, adjustment range and weight-bearing capacity, it's a good option and, of course, is fully compatible with other RAM products.An aside: One of the RAM products with which I have some experience is wholly inadequate for many applications in my opinion. Especially high temperature applications. Please read my review of the RAM 14" Long Extension Pole with (2 qty) 1" Diameter Ball Ends, and Double Socket Arm for a full description of its deficiencies if one is considering purchasing it. In the right situation and with some additional precautions, it is workable, but it all depends upon the application in which it is to be installed.
Recommended Products