Your cart is empty.
Your cart is empty. Package include:
1 set of offline hand controller board
1 set of cable
1 set of SD card
Specification:
(1) Main Page
Ctrl: Machine Control
File: Use the Gcode file
Press [Y+] [Y-] to select
Press[Ok] to Enter
(2)Control Page
X± Y± Z±: Moving Axis
OK/Spindle: Spindle ON/OFF
Exit/Step: Change Step/Exit (long press)
How to increase the spindle power: After pressing the spindle button, press and hold the OK button and the Z+ button simultaneously to increase the speed.
How to decrease the spindle: After pressing the spindle button, press and hold the OK button and the Z- button simultaneously to decrease the speed.
Note: The spindle can be a motor or a laser.
(3)File Page
Common supported formats include nc. tex. tap.
Press [Y+] [Y-] to select file
Press [Ok] to Enter
Press [Ok] to begin if you are ready
Note:Long press [Exit] to stop machining
Customer
Reviewed in Canada on August 25, 2024
Using Lightburn to create and save file. Plugged SD card in and started ok but soon just took off across material with laser on till it hit limit switch. Not overly pleased with that performance
labrat
Reviewed in the United States on August 1, 2024
The screen is very small and difficult to read. It is like trying to read a postage stamp for the commands. Also, controls are less intuitive than other controllers. Recommend spending a little extra and get the CNC controller that is larger and more intuitive.
JG
Reviewed in the United States on March 10, 2024
Seems okay but these never last that long.
R.D. Charter
Reviewed in Canada on April 13, 2023
A bit small. Be sure to disconnect your USB cable from the computer before using. 3 stars because the connector ribbon cable is short and inconvenient if your machine is in an enclosure.
A Butler
Reviewed in the United States on August 25, 2022
This controller was able to move the XYZ axis in four selectable steps 0.1, 1.0, 5.0, and 10.0Beyond that, it WOULD NOT even machine designs that were INCLUDED on the memory card.DO NOT waste your money on this controller!
Seneschal
Reviewed in the United States on October 15, 2022
Fantastic for its price, makes zeroing your access on your piece quicker. No more back and forth to the machine in the monitor when starting your piece. The memory cards a cute touch but I like to watch different stats and things when I run my projects and my computer's in the same room so I have yet to use it to send my own G-Code. I dig try one of the test codes that came on it already and it worked fine.
Dustin Glidewell
Reviewed in the United States on May 17, 2021
Arrived extremely fast. Exactly as described.
Rob P.
Reviewed in the United States on July 2, 2020
As you can see in the photo all I got was a a cable and a plastic housing that’s not shown in the product photos. By the included cable it looks like it would not have worked anyway as mine had less pins on my board.
Konstantin Balashov
Reviewed in the United States on July 10, 2020
Works as advertised. On my CNC, when it is plugged in, I cannot control the grbl via USB. At this point I never use it because controlling the CNC from laptop is much more convenient. You might consider buying it if you are in high-volume manufacturing, or if you have just one laptop and you want to walk around with it while CNC is working.
Terry
Reviewed in the United States on February 15, 2020
Works well for jogging. But if a problem arises during the engraving it is almost impossible to pick up where you left off.
Recommended Products
$219.99
$ 93 .99 $93.99