Your cart is empty.
Your cart is empty.Product Description
The packaging only include 1 piece motorcycle crash pad for the right side, if you need to install 1 on the left side, you can purchase 2 pieces
FITMENT
- Compatible with NINJA400 Z400 2018-2022
- Compatible with Rebel 300 500 CMX 300 500 2017-2023
- Compatible with NT1100 NT 1100 2022-2023
- Compatible with C400X C400GT F900XR 2020 -2023
- Compatible with Husqvarna SVARTPILEN 701 401 2020 2021
NOTE
- These engine case protector crash pads are equipped with 1pc M8*80mm and 1pc M10*100mm bolt, so it will compatible with most of motorcycles that use M8*80mm or M10*100mm screws
- Do not fit for motorcycle use M8*50mm screws
- Please confirm the screw size of your motorcycle before purchase
EASY TO INSTALL
- No installation instruction
Great addition to your bike!
- ITEM TYPE : motorcycle rear frame slider
- PACKAGE INCLUDE : 1 pc motorcycle rear frame slider, 1 pc M8*80mm screw, 1 pc M10*100mm screw
- COLOR : black/red/blue/titaium/gold/green/orange
MATERIAL
- CNC aluminum alloy, anodized to lasting wear
- Reliable and corrosion resistance
MOUNTING POSITION
- The crash pad is mounting on the right side of motorcycle frame, the end piece has a strong spring, so that there is 'give' in the event of a fall
FUNCTION
- Protect motorcycle fairing in the event of a crash or tip-over, prevent the expensive engine and frame of the motorcycle from being damaged during a fall, minimizing damage to your motorcycle
barbara mowrey
Reviewed in the United States on March 7, 2025
This is easy to install fits well on my kawasaki ninja ex 400
Logan Hipps
Reviewed in the United States on August 20, 2024
This product is a little complicated to set up but once you figure it out it goes on smooth and fits well. The quality appears good and Iām happy with the product!
Dano
Reviewed in the United States on February 4, 2024
I would have given this product 5 stars if not for the provided hardware. The head of the socket bolt is only slightly larger than the hole the bolt goes through. If I were to tighten it the bolt head would surely press into the hole. Fortunately, I have a metal lathe and am able to fabricate sleeves to reduce the size of the hole. In addition, I purchased stainless steel washers.The slider looks to be very well made and I am sure it will function well with the additions I provided.Update: just received my second slider that I purchased for the left side. Still the same issue with the bolt head and no washer. There is only one 8mm bolt and this one is shorter than the first. These are not sold left and right. The nut is not a lock nut and no lock washer is included. Without the addition of washer and sleeves these would be useless. Too bad as the slider itself appears to be made very well.
WesY
Reviewed in the United States on November 14, 2024
I must admit, it looks a little bit like training wheels, but the security of knowing that I'm not going to absolutely tear up the bike if it drops is a good feeling. I've already softly laid the bike over and the skids seem to work well.UPDATE: When you put them on, use Locktite to secure them. One of the slider ends came off during a ride and HAONEL does not seem to offer replacement ends. I had to order a complete side to replace just the ends. Had to knock down the review to 3 stars just because of no replacement ends and its ability to come off. Plus the nut that attaches to the bike came off and my muffler was dangling as a result. Needs locknuts.
G.N.Greaves
Reviewed in Australia on October 11, 2024
Simple to fitShould do the job it was designed for
Daniel
Reviewed in the United States on July 8, 2023
The screw that is in the slider itself is loose and to short to even screw into anything
Kindle Customer
Reviewed in Australia on October 15, 2023
This slider fits to the frame just behind the footpegs on my Honda CMX 1100. It has an adaptor plate to allow it to be fitted and comes with an assortment of bolt widths and lengths, none of which were the right length for my CMX 1100 (which is why I dropped one star). The bolt needed for the CMX is M8 50mm.The reviewer giving one star clearly didn't realise that the slider unscrews into 3 pieces for fitting to the frame and must be unscrewed for fitment.Some assembly instructions would have been handy - for example, the end piece has a strong spring, so that there is 'give' in the event of a fall. However, I was unsure how tight to screw down this end-cap; the more I do, the less 'give' there is, but the less I do, the more likely it will be to fall off in a crash. A torque setting would have been handy. I just had to guess.Very high quality machining and components. I hope to never find out how good it is in an actual crash, but it will give my legs some extra protection - it's not the bike I worry about in a crash!
Recommended Products