Shopping Cart

Your cart is empty.

Your cart is empty.

Rikon (RIKB7) Rikon 60-100 1 HP Dust Collector

Free shipping on orders over $29.99

$365.49

$ 99 .00 $99.00

In Stock
  • 1 HP Motor Powerful TEFC (Totally Enclosed Fan Cooled) motor keeps the dust out for safety
  • Casters for Mobility Sturdy steel base with four casters for storage and mobility
  • Safety Lock Toggle Switch Prevents accidental or unauthorized use


Features 650 CFM's sturdy steel base with four casters for moving from machine to machine or for storing out of the way. Curved 9" steel impeller for maximum air velocity.


Deborah Fuller
Reviewed in the United States on June 29, 2022
Rikon 60-101 Dust Collector bag, regarding the bag clamp, I have only used this tool probably only 10 times and the bag keeps blowing off. I have had it clamped on as tight as it will go and it still blows off. The black rubber flange that the bag and clamp get attached to is not round. The drum is round, but the flange is not round, therefore, it does not support the clamp when attached. This causes the bag to not stay attached. Also the ridge that the clamp is supposed to rest on, is not large, so it just slides off. I have called and emailed Rikon, stayed on the phone for over 15 min on have not heard anything from them. I WOULD NOT recommend buying anything from this company. They obviously do not stand behind their products.
Michael Maiorano
Reviewed in the United States on June 25, 2019
Great product
Ed Korsberg
Reviewed in the United States on December 6, 2019
I have not used this to any extent yet but so far it seems to sufficient for my needs. I wanted a quieter collector than my shop vac. The air flow seems good and the overall noise level better than the shop vac. The only negative I have is that the instruction manual describes a slightly different configuration than what the product ships with. Specifically I refer to the lower particulate bag. In the manual they both describe and show a bag similar to the top bag that has provision to thread the holding clamp through. But the product ships with a cheap clear plastic bag. It is difficult to hold the bag up against gravity while trying to wrap the strap around. You need 3 hands. I solved this by using duct tape to sort of hold the bag from falling while I use 2 hands to strap it in. But given the price and performance I would still recommend it. But it seems like since the time of manual printing to shipping they decided to save a few pennies with this junk bag.
Yopauly
Reviewed in the United States on February 19, 2018
The collector was easy to assemble and works great. The bag is difficult to put in place, which is my only issue with it. If you have a small shop, this is a great collector.
TSMobile
Reviewed in the United States on June 26, 2017
quiet, good pick up. A nice upgrade from simple centrifugal fan. But you just have to get used to the intake grid to protect impeller from large, hard object - it gets congested easily, blocking the intake. But it is easy to pull hose and clear.
William Kingman
Reviewed in the United States on March 12, 2017
The Rikon 60-100 is performing exactly as promised and works well in my shop. I connect it to my table saw, router station and planer as needed and it handles the dust and chips without any problems.
Rico
Reviewed in the United States on June 7, 2015
Just received this product so can't comment on how well it works. I can say that the other comments regarding assembly are understated. The instructions are totally worthless. I am very handy with assembling mechanical things but this was the worst. It took my wife and I several hours and many tries to finally get all parts aligned so the machine would go together. The company should either redo the instructions or post a video of the correct way to assemble. You must mount the tube to the motor assembly FIRST and the line up the base and other parts. I hope it works better than the assembly part. Will comment on that later.
tom cat
Reviewed in the United States on November 4, 2015
The dust collector may have been ok but some of the parts were missing. I have purchased a few items that are not American made and have found this to be the norm in most cases.also some of the connecting holes did not line up.I could have assembled it if I had modified it but thiswould have voided the warranty. FYI spend your money on american made products.