Your cart is empty.
Your cart is empty. Packing Listing:
1pcs Insulated Glass Cup #10 ( 5/8" x 1" & 16.0mm x 25mm )
1 pcs Medium Back Cup 57Y03
1pcs TIG Collet 10N24S ( 3/32" & 2.4mm )
1pcs TIG Stubby Gas Lens 17GL332 ( 3/32" & 2.4mm )
1pcs TIG Gas Lens Alumina Nozzle ceramic cup 53N60 #6
1pcs TIG Gas Lens Alumina Nozzle ceramic cup 53N61 #7
1pcs TIG Gas Lens Alumina Nozzle ceramic cup 53N61S #8
1pcs TIG Gas len insulator 17GLG20
4pcs Temperature Resistant O-rings
George moser
Reviewed in the United States on August 13, 2024
These work but not much more than that, it's not high quality like CK Worldwide but you pay more for top quality.. Will work on a budget. I would recommend in a pinch.. Fitment is a little tight for the cup Insulators..
Adolfo Rodríguez Cortes
Reviewed in Spain on May 2, 2024
Me parecen que están genial, las estrené hacé poco y para mí son muy cómodas, al ser cortás me fue más fácil hacer mis prácticas de soldadura.
Jorbusvi
Reviewed in Mexico on October 27, 2024
Buenas piezas
カラーイオ
Reviewed in Japan on April 29, 2024
曲がりの無いタングステンでも画像のようにナナメに出てきます。コレットの穴が中心からズレて穴もナナメになっているためです。コレットは2個入ってますが2個とも同じで使えないため金属クズで捨てました。コレットを他から買い直したらタングステンがセンターになりました。
Christian
Reviewed in the United States on February 1, 2023
To get the insulator on the torch (CK17), I had to heat up the white insulator with a heat gun first just to get it a little warm and pliable and then it easily snapped on.
dom
Reviewed in France on November 16, 2023
fonctionne bien, bonne qualité
David B.
Reviewed in the United States on April 29, 2022
The insulator that comes with this doesn't fit ck 17 torches. I am using a ck 17 insulator from Furick and it works perfectly. I just broke my Furick pyrex a couple of days ago and wanted a cheap stubby kit to replace it. I'm kind of tired of the pyrex cups. I tend to bump them when working and get my tungsten off center. You can't beat $10 for this kit.
Michael
Reviewed in the United States on September 29, 2020
I like the jumbo lense however these stubby gas lenses and assorted cups do have their place. great for tight spots where the jumbo gas lenses will not fit in.The carry case keeps the accessories organized and handy.
Jon
Reviewed in the United States on October 22, 2020
I was very happy with this purchase, it gave me the chance to try out the gas lens, Pyrex cup, and stubby cups, with added tungsten for very cheap. This is a great starter kit or for anyone doing a small job.
Allan pagett
Reviewed in the United Kingdom on August 23, 2019
The Pyrex cup fitting is quite precarious other than that everything is good and value for money
Mike M
Reviewed in the United States on February 25, 2019
I will start by saying that i ordered this hoping that everything would at least fit my torch. Everything fits nicely including the pyrex cup. I wish it came in a divider box instead of a bag wrapped in bubblewrap. The tungsten that came with my order was all there and seems to work fine but the blue on the end of the tungsten was faded on them all but really it is not even a big deal
Corey johnson
Reviewed in the United States on April 19, 2018
Works just like any other stuff. Hit the steel with a grinder and did a few welds trying to make it mess up like the previous reviews and couldnt get it to. Welds just like my Lincoln Tig welder at work with high dollar stuff. Setup is an Everlast powertig 200dx from 2012. Wp17f torch for $11 off Amazon. And this kit with #8 cup. Even did some cup walking with it for fun. Literally sanded with 60grit and made passes, so there's some garbage in the weld. Not the fault of the setup mearly lack of prep.
My experiences
Reviewed in the United States on September 12, 2017
I really think it deserver 3 stars, but I'm giving 4 because I'm not sure if it's my ignorance, or if the wrong pieces came with the kit. I'm using a #17 flex head torch that came with my AHP Alpha Tig. straight out of the bubble wrap, collet length is just too long. I'm not sure if I ordered the wrong one, of if they sent the wrong collet.hooked up my new lens gas at 20CFH, cold rolled 3/32" bright shiney metal wiped down with acetone. sparkle show, metal stuck to my new gas lens, new lens can't pick it off now it's flow pattern is compromised. I haven't used the pyrex cup yet. I'm kinda afraid to. here's why:Again I don't know if its my ignorance or if something isn't right. I got the gas lens to provide good coverage, reduce argon consumption. What I ended up with is good coverage at 25 to 30 CFH. ,I was hoping that the lens would reduce the CFH but not the case. I have to run 25 -35 CFH in order to get coverage that actually covers. I was hoping to drop down to 15 to 20 CFH with the lens. I've tried different cup sizes hoping to reduce the CFH but doesn't appear to matter. I've tried 5 - 8 and the weld quality is about the same. the other piece to this puzzle my torch gets so hot I can't hold it at 75amps doing 3 to 4 inch welds at a time on 3/32" plate. I contacted the vendor, they had me run some tests and everything checked out.It's a bit frustrating because it just takes a good sparkle show to get metal stuck to the screen on the lens and then (at least this is what I do) ending up tossing the lens out because of the contamination. Very frustrating!Truthly it's a 3 star, but I'm giving it 4 on the benefit of a doubt, the doubt part being the operator.Quality?I don't have much to draw from, because this is the only stubby kit I've purchased. I will be switching to a CK torch and lens kit soon. So I will have something to compare it to.1. the lens does fit in my 17 flex style torch2. collet ? not sure if I ordered the wrong one, or if they shipped the wrong one.3. lens appears to work, though I'm not sure if the collet is blocking the argon flow. again, the one that came with the kit is for like a #26 style.4. instructions on how to use the pyrex cup for us neophytes.
Recommended Products
