Your cart is empty.
Your cart is empty.The Sram Rockshox quality made shock pump easily delivers the high PSIs needed to tune certain forks.
Rebecca
Reviewed in the United States on February 12, 2025
A bit expensive, but it's a great suspension pump. Accurate and easy to use.
tony smith
Reviewed in the United States on January 5, 2025
no air loss when disconnecting the pump. goes above 300 psi that is required on many heavier fat tire or ebikes. I used this to set my psi on a Yamaha moro 07 and it works perfectly.
armando alderotti
Reviewed in Italy on May 23, 2024
Presa per la sua alta portata, non solo per la parte pneumatica di forcella e mono della MTB, ma anche per revisionare il mio mono FOX e mettere in pressione la parte idraulica.E' un po' piccolina per questo scopo, diventa molto dura ma non si può chiedere di più ad un oggetto simile.ottima qualità di costruzione
Angela
Reviewed in the United States on February 9, 2024
Hasn’t failed me yet. Easy to use. Seems to be of good quality.
Whitesands
Reviewed in the United States on February 13, 2024
Needed this to check pressures in my fork and shocks works great and portable to carry in my backpack.
Theo T.
Reviewed in Belgium on November 24, 2024
Kan zonder veel kracht zeer hoge luchtdruk opbouwen, ik heb 23 bar nodig voor mijn demper en dat is geen probleem.
Robert
Reviewed in Germany on October 12, 2024
Habe sie mir gekauft weil ich auch endlich selbst eine Dämperpumpe in meinem Fundus haben wollte. Bin sonst immer zu meinem Händler gegangen um seine kurz auszuleihen - die Bettelei war mir aber auf dauer zu blöd.Achja, die Werkstatt nimmt genau die gleiche Pumpe her.Sehr hochwertig verarbeitet, Preis/Leistung top.Ich persönlich komme mit der Skala auf dem Manometer gut zu recht, kann die Einwände anderer Rezensenten nicht nachvollziehen. Auch das verbaute Schraubstück fürs Ventil ist sehr massiv, die Menge an Luft die beim Abschrauben entweicht kommt meiner Meinung nicht aus dem Dämpfer oder der Gabel sondern lediglich aus dem kurzen Stück Schlauch. Deshalb kann ich gut und gerne auf etwaigen Ventilentlastungsfirlefanz verzichten, was doch eh bloß wieder ein Schwachpunkt in Sachen Haltbarkeit und Lebensdauer wäre...Achja zum Druckaufbau: mein Dämpfer erlaubt maximal 350 psi, habe ihm also 17 Bar gegönnt - das ist für die Pumpe ein Kinderspiel und grob die Hälfte von dem was sie schaffen könnte.Für den Preis von Aktuell um die 30 Eur sehr zu empfehlen.
Sloth262
Reviewed in the United Kingdom on April 11, 2024
This is a replacement for one that I was told was a great product. It lasted a coupe of months but this one is excellent. So much more robust but still lightweight and easy to use.
Pseudonym
Reviewed in Sweden on November 21, 2023
Mycket bra kvalitetskänsla, perfekt när man vill serva sin bakdämpare till MTB som behöver 500PSI tryck.
Marissa
Reviewed in the United States on January 23, 2023
Using this to check/adjust the pressure in a Fox TSS on my Timbersled snowbike , pump works well, I think it’s a bit longer than the original that I lost but it still fits in my toolbox. I like that it pumps to a higher pressure, my last one wouldn’t go much over 300.
Mike
Reviewed in the United States on April 23, 2023
Works really well. Previous Giant shock pump was very difficult to pump for rear shock pressures about 200 psi. This pump is easy to use, feels solid, and allows you to pump to higher pressures easily.
Chris Rottman
Reviewed in the United States on November 20, 2022
This is perfect for my Begode Master EUC. The shock needs 280-350psi, and the fact that this pump goes up to 600psi makes so I can either ride street, or offroad.The only thing I’d change is the clip that holds the pump’s hose flush against the pump while not in use—I’d like to see it be able to get locked into the plastic clip with a plastic pop-latch, for lack of better words…and a way to keep the pump shaft/handle sliding up and down by itself.It’d also be nice to see a design that could allow the user to take advantage of a use of leverage in any situation; something that could come in handy to quicken the pumping process, especially in the higher psi’s…But these are all minor gripes—the pump is all around solid and will get the job done at home, or on the go. I never leave home without it, just in case I need it for one reason, or another.
Jared
Reviewed in the United States on November 19, 2021
The need is quite large for the PSI scale, so the easiest thing to do is convert PSI to Bar and then fill to the correct Bar pressure. This will provide a much more accurate gauge reading.Other than that the pump is very nice and works as designed.
Recommended Products
$53.50
$ 27 .99 $27.99