Shopping Cart

Your cart is empty.

Your cart is empty.

Rotary hammer dust collection attachment,Universal Dust shroud for drilling

Free shipping on orders over $29.99

$25.99

$ 12 .99 $12.99

In Stock

About this item

  • ★Rotary hammer and Drilling dust-extraction attachment-optimized for drilling diameters from 3/8 In. to 1-3/8 In.; accommodates up to 2-3/4 In. by removing brush ring
  • ★Vacuum Dust Extractor is compatible with standard hose size from 26mm to 39mm(1-1/8In.1-1/4In.1-1/2In.1-3/8In.),accommodates 64mm(2-1/2In.),by removing rubber band
  • ★Rubber seal maintains suction to wall, and ensures dust containment
  • ★Dual air chambers provide for both dust collection during use and provide suction to the wall
  • ★Hose receiver swivels to allow for repositioning of the hose as needed


* EASY TO USE: Specially designed to offer you the ultimate in convenience and comfort, this dust collector is very easy to use in just seconds. Just set the drill buddy on any flat surface of your choice, press on the vacuum button for an instant and secure seal, then drill. After through, simply release the suction by clicking on the button and empty the dust over a bin so you can move onto your next project.
* CATCH ALL DUST AND DEBRIS ON ANY SURFACE: Whether you’re drilling concrete boards or drywall, this dust collector will easily catch all debris extracted from the wall and allow you to empty the contents in the trash can with a single move. Optimized for 1-3/8 inch drill bit diameters with dual air chambers and a secure, rubber seal for instant suction to any flat surface, you will lovely use this tool.


xtal
Reviewed in the United States on February 1, 2025
Works well. Good quality
Thomas Figueroa
Reviewed in the United States on September 30, 2024
Given the price vs the other big manufacturers, I was not expecting much other than it'll get me through some concrete jobs for the time being. Turns out it's actually really nice. There's a rubber fitting for the hose connection rather than just plastic on plastic. It's bigger and heavier than I thought it would be (a good thing IMHO, it's built well). Clings to concrete block walls with no issues, even with a lower CFM HEPA vacuum.
jim
Reviewed in the United States on August 6, 2024
Worked great, contained 99% of the dust making it well worth it
Sathiyaraj S.
Reviewed in Canada on August 17, 2024
Very good product. It should be noted that this drilling dust-extraction attachment is optimized for drilling diameters from 5/8 in to 1-3/8 in and not 3/8 in to 1-3/8 in as stated in the product description.
YB7
Reviewed in Canada on February 2, 2024
Très semblable au Bosch mais moins cher. Fonctionne très bien avec ma Shopvac et avec l’adaptateur aussi bien avec ma Festool ct15
RE
Reviewed in the United Kingdom on December 13, 2024
The product did keep any brick dust and mess from kicking out when drilling. But it was impossible to tell how deep you had drilled without stopping and taking the attachment off the wall making the process much slower. The drilling attachment also created large witness marks on the wall which were left behind brick dust that I found impossible to remove without scrubbing which was not ideal.The build was good and it attached to the vacuum and wall perfectly, it's just impractical for use when you need to know how deep you have drilled, such as when you are using wall plugs. In generally it was tidier and easier not to use the attachment and just hold the vaccume to the wall
gary davey
Reviewed in the United Kingdom on November 23, 2024
Works quite well but leaves black marks on the wall, maybe should have used silicone instead of rubber
SJK
Reviewed in the United States on November 17, 2024
This dust collector attachment is working great at keeping concrete and drywall dust under control when drilling to install wall anchors. I was surprised to find that it would even stay stuck on a wall when using my 20V cordless DeWalt two-gallon vacuum, which doesn't really produce that much suction. The dust attachment body is made from a sturdy plastic with a foam rubber gasket that surrounds the entire body and compresses snugly against the wall for a positive seal. The vacuum hose connection on the adapter both of the standard 1-1/4 and 2-inch hoses that my shop vacuums use.
Michelle Turner
Reviewed in Canada on October 15, 2023
I bought this for drilling hundreds of holes into drywall and masonry inside a hospital setting. I purchased one of these and one from Bosch, for double the price. My crew likes this one better as the rubber gasket around the vacuum hose fits better on our different types of hoses. Both brands leave dust marks on the wall, but to be expected. It's a simple tool, so not much can go wrong with it. Well made.
Travis S.
Reviewed in the United States on February 13, 2022
Great product, works as designed, putting off projects because of the mess is no longer an excuse!
buzzzlove
Reviewed in the United States on November 30, 2022
This was the cheapest version of this I could find on Amazon. It worked well is not flimsy I'm happy with the purchase
Trevor Bennett-Cohen
Reviewed in the United States on August 31, 2021
I was expecting to need a second person to hold it or have to at least lose one hand to holding it and therefore only have one hand free to control the drill but I was really impressed how it holds itself to the wall even with the hole open before you insert the drill in the hole (improving the vacuum).It removed the debris nicely leaving nothing to clean up after drilling 3 holes. Even if a tiny amount of debris esvapes, it's like night and day versus working without it. Highly recommended.
costoyadavid
Reviewed in the United States on December 20, 2021
to me this is a good deal I get for half the price almost the same quality as the most expensive ones