Your cart is empty.
Your cart is empty.Product Description
For more than 10 years, Runleader has focused on product development and manufacturing in the fields of hour meter, battery indicator, multi-function meter, controller,service for the garden machinery industry, outdoor power vehicle equipment, transportation vehicles, such as: generators, pumps,chainsaws,outboards,lawn mowers,compressors and others,provide well-known European and American customers with quality products and services.
- RL-HM035T TS002 is a multifunctional meter which have functions: engine temperature measurement,engine running hours record,maintenance reminder and RPM measurement.
- It with default green backlight which can help you to use it at night or dim place, the red backlight will be displayed to remind you the maintenance arrival and RPM/TEMP exceed.
- This device have favorable water resistance which can keep the good working condition up to waterproof rate IP65.
- It attached the built-in replaceable battery CR2032 with long running lifetime.
Runleader RL-HM035T TS002 Digital Multifunctional Meter, Engine Temperature Gauge, RPM & Hours Display, Replaceable Battery.
2. Digital Hours Tachometer
- Real-time RPM: Record the engine real-time RPM value when it run, help to calibrate the accuracy by 9 engine firing patterns.
- MAX RPM&RPM ALERT: Display the maximum RPM value since engine start to work, Alert the RPM running exceed based on the preset RPM alert value.
- HOURS: Keep track of total and partial hours for engine running;Schedule the regular maintenance task and advise it's arrival time.
- RPM range: 0 to 25,000 RPM.
- TOT & JOB hours range: 99,999 hours
- Maintenance timer range: 0 to 200 hours.
1. Engine Temperature Gauge
- Real-time temperture: Help to measure the real-time temperature value for engine oil by TS002 probe sensor.
- MAX temperature: It display the maximum temperature value during historic measurement process.
- Temperature alert: Remind the temperature exceed based on preset alert temperature value.
- Temperature units: You can switch the temperature unit from "℃" to ℉".
- Temperature measurement range: -20℃ to 300℃(-4℉ to 572℉).
- Green & Red backlights display.
- Replaceable built-in battery.
- Well-completed accessories.
Runleader has established a complete laboratory for testing and improving the product's quality
Buttons Testing
The buttons can works well after 10,000 repeated taps with a 300g weight.
High & Low temperature Testing
It can works well in temperature environments temperature: -40 °C - +70 °C
Drop Testing
Favorable anti-vibration performance can suffer strong vibrations when the equipments is working.
Anti-vibration Testing
It can keep the housing and LCD display window in good condition upon vibration amplitude 1.52mm after 6 hours testing period.
Salt Spray Testing
It can keep good working condition under 5% strength salt spray solution about 16 hours.
Yellowing Resistance Testing
It can keep good working condition from simulative strong UV ray lightening.
Installation Methods
Kay Gee
Reviewed in the United States on January 13, 2025
Bought two gauges to measure head temps on a twin cylinder engine. One of the gauges has stopped displaying the bottom digits after being installed less than 24 hrs. The other gauge is working fine so far.The seller responded quickly and sent me replacement gauge very quickly.Giving 4 stars for great customer service. I hope these gauges will work for more than a few weeks. Will update review after a few more months of use.
Raymond t.
Reviewed in the United States on April 17, 2023
put it on rear cylinder to watch temp, works good
Ryan Clark
Reviewed in the United States on July 14, 2022
Runloader products are horrible. I have bought many different products from them hoping one of them would work. None of them have ever worked properly. Especially the temperature sensor. Once they come up to temp the sensor breaks. It’s not getting too hot because it was only 200° before it broke. They’re supposed to go 10 times that. Bad company, crappy products
B.W.
Reviewed in the United States on June 17, 2022
I have ordered a few of these now and I love them!
Oregon Reader
Reviewed in the United States on October 9, 2022
Bought this for my small motorcycle because I was concerned about it overheating after recent mods. The screen is constantly switching between temperature and rpm and run time. Although I have not had it out of the garage yet, it seems to have a built-in unsafe feature. Ever hear of distracted driving? I just read all 2 pages of the instructions again, and there is no way mentioned to keep LCD on 'temperature.' If I could do that, I could just glance down once and read the temp... got it, okay. But, I will have to keep glancing down many times to 'catch it' showing temp. Either that or stare at it steadily for a couple of minutes. Either way, my eyes will not be on the road where they are supposed to be! Yes, you can switch to temp with the buttons, but that is a PITA as others have stated, and also would cause me to not look at the road while I am fighting with them. According to one answer I got from another buyer, sounds like if you disconnect the rpm wire from the spark plug wire it will read temp only.... really?!? What an elegant solution that is! Might just chuck it and buy another brand. Not happy.
Scott B
Reviewed in the United States on October 13, 2021
Works out of box no mods required temp ring fit perfect on spark plug easy to switch between rpm and temp on the fly
Garrett mcquait
Reviewed in the United States on June 12, 2019
works great
Ben
Reviewed in the United States on October 7, 2019
Overall product quality seemed good, but I can only give a 1 star review based on an issue I had and no response from the company to correct the issue.After installed the battery and bench testing the systems, I was getting a flashing “Err” on the controller screen. Based on the manual, this is caused by a faulty temp probe. I went ahead and installed the meter on a 1 cylinder 4 stroke dirt bike and the hour/RPM options worked fine, but the temp sensor was still flashing “Err”. After multiple attempts to contact the company and getting no response, I have uninstalled the meter and attempted to diagnose the faulty temp probe. It appears to be a bad connection inside the probe itself, which has two wire leads feeding into the probe and secured with an epoxy-like glue.The meter control board looks to have quality waterproofing seals and the two “M” and “S” buttons have me no issues. I would happily take a replacement from the company if they would every respond back to me.UPDATE: increased review from 1 star to 4 stars after getting in contact with RunLeader. They are sending a complete replacement unit to cover the original defective multifunctional meter.
Recommended Products