Your cart is empty.
Your cart is empty.Product Description
Removable gas shielded welding gun
- Detachable Welding Gun for Improved Performance: Features a removable welding gun for enhanced welding quality. The output voltage and wire feeding speed are conveniently controlled together via a single integrated knob.
S7-Everything Originates from Quality Faith
- Compatible with 6010, 6011, 6013, and 7018 stainless steel wires in diameters of 3/32, 1/8, and 5/32 inches in microwire mode. Works with both flux-cored and solid wires, suitable for CO₂ gas or gasless applications.
- Simply select the wire diameter and material or gas type, and the machine will automatically adjust the current and wire feeding speed, making it easy for new users. The manual wire feed speed control allows for precise welds, making it ideal for beginner welders.
- Supports gasless flux core MIG welding, gas MIG welding, stick welding, lift TIG welding, spot welding, and spool gun welding.
wire as image,then connect mig gun
When the welding wire is fed out of the welding gun, attach the contact tip
When the welding wire is fed out of the welding gun, attach the contact tip
Wire feeder pressing wheel compression
Don
Reviewed in the United States on March 17, 2025
This is an excellent 200A multiprocess welding machine. Perfect size for making it portable. Welds everything I've put in front of it (1/2" SS Plate, so far). Doesn't struggle when trying to start cold. The Flux Core gun is one of the best I've ever seen. They certainly didn't go cheap on the quality. I would buy again and I'd definitely recommend this machine to family and friends!
Eric Walls
Reviewed in the United States on February 8, 2025
For the money, you can't beat this little welder. It functions as it should and will serve anyone well for small jobs and lighter duty welding. Components are decent, the only thing I would like to see are better leads and connections. Upgrade the stinger and ground clamp and you'll be satisfied.
Dwayne Settle
Reviewed in the United States on February 5, 2025
Waited a while to write this untilI really got some use out of welder. Bought it to use while my Hobart was being repaired, as it was taking a long time to source parts for repair. Mig on this machine is good,I have used much better, nèeds wire speed and heat adjustments, seperate. But heres where this little machine shines, I fabricated and made lift system and arms for my tractor, and welded up a new 8 x 16 foot trailer in 1 day using stick welder, burnt up almost 10 lbs of 7018 rods in 1 day. Did hit the overheat light a few times. I've done got my money back outof this machine. Just waiting to see how long it lasts.
YPM
Reviewed in the United States on January 31, 2025
The machine looks in excellent condition and welds with good power. The only thing I don't like is the cable connectors are too thin for a power of 200A. For the rest, everything is fine.
Bruce Kirk
Reviewed in the United States on January 28, 2025
First one stopped feeding the wire after third use. I contacted Amazon and they were real quick to get another one out here to replace it. New one works OK so far with the stick haven’t used the wire yet. Hope it works as now it’s out of warranty. They only give you one month to find out so you need to try it out as soon as you get it.
Neta Zilberman
Reviewed in the United States on August 3, 2024
Quality is very lowUsed the original gun and wireDoesn’t load well and stops feedingElectrical contact of other setting don’t conductYou should avoid it and choose a different brandUnfortunately I missed my return windowOr else I would return it Asap
Campeon
Reviewed in Mexico on June 19, 2024
No la he usado mucho pero, sin duda hice buena compra si la recomiendo.
Krystal Kostuik
Reviewed in Canada on February 5, 2024
Bought this for my husband for Christmas and he absolutely loves it! He said he can pretty much do anything he needs with it! Definitely good if you have to re-teach yourself if it's been awhile or for beginners!
佐藤史弥
Reviewed in Japan on December 9, 2024
コスパ最強で短時間溶接なら問題なく動作します。細かくスポット溶接の様にワイヤーを送ると本体ワイヤー入り口でたわんでワイヤーが折れてしまいますが、調整次第では解決するかもしれません。安いので、評価は満点です。
TD
Reviewed in the United States on November 13, 2024
Just got it today no set up instructions I been wire welding since 1972 the cable on the front bottom left was my only issue. I did not know where it went so I went online to youtube it.After that I could get it welding. I just plug it in using the 115 volt standard house plug in. I was shocked at the first setting I blew thru 1//8'' metal so I put 2 haft inch dia. round bolts together and adjusted the setting lower made a perfect weld with the flux core wire. I cant even imagine what this machine will do plugged in to 230 volt !!! I just hope it holds up to future use. For the money you cant beat it. I'm going to buy another one and put it in storage.
dave watanabe
Reviewed in Japan on May 7, 2023
The media could not be loaded.
Sonny
Reviewed in Canada on December 27, 2023
i wrote a bad review at first talk to customer service with no avail. alot of peopel had problems with this thing.. i thought it was oiperator error so i didnt want to rush to get angry or return it i really needed a welder around ehre and this things was 200 bucks for a 4 in 1 welder.. so i bought it..i had problems woreking it at first becasue well.. operator error, so when welding in tig or mig settings you have to constantly hold the trigger as the wirse is feeding or it wont weld it will only spark..thats soemthing peopel had problems with so continuosly hold the trigger and itll weld.. as for the stick welding i havent tried it much yet but last time i did all it did was spark so as for the Mig and flux core settings i figured those out. i have done stick welding before but ill have to retry and paly aorund wiht the settings on it. it welds ok and has worked for a few projects so far...at 200 bucks it was a good buy but 400 idk ... the gun for stick welding also came broken and they said theyd sed me a new one but it never came..big surprise.
V. Williams
Reviewed in the United States on April 16, 2023
My welding machine arrived damaged, but it seems to be fully functional after I purchased a replacement stick holder. This is my very first time ever welding and I have had no formal training. The machine made it easy for me to make a first go at it. I did a practice run using the stick welding function as well as the mig function; all on just 110-120v 20amp outlet. The circuit breaker triggered only once, when I had the power setting on max at 200. Once I turned it down to 195 or less, I had no problem with the circuit breaker triggering off. I found the welder works well at 195 for stick, and 185 for flux/gasless mig.I purchased a box of 6013 and a box of 7018, but only tested with 6013 so far. The welding stick during my stick welding did get stuck a handful of times in the beginning, but it was easy to unstick just by moving the stick back and forth or side to side. I learned that the arc starts best when I slide the stick instead of tapping.The included roll of mig flux wire was nice, as I did not have to figure out what wire to purchase. I learned that I need to take off the mig cable to help thread the wire into the cable head, else it would get stuck and make a mess inside. I also learned that I need to take off the nozzle and manually work a piece of wire through the tip before using it else the wire would get stuck on it and the feeding mechanism inside the box would just bunch it up. Apparently, the included nozzles are not made to tolerance, but by pushing wire through it, it clears some copper at the tip that would otherwise cause the wire to not feed through.As stated, today was my very first time ever using a welding machine, and I think I did OK with the help of this easy to use machine. I did some research and bought nozzle gel as well as anti-spatter spray. I don't know how much it helps because I have nothing to compare against, but from what I understand, it makes the welding process a much better experience and I guess I have to agree because I did not have the problems of spatter clogging the nozzle nor spatter getting stuck on everything around me. The construction crew that built a stairwell for me left some waste pieces of structural steel, and I used four of those pieces for my first welding practice today. I managed to weld two pieces together using stick, then using mig. I felt the stick was much better for filling in the large gaps between the two pieces of metal that I was welding together. Once filled, moving the mig wire back and forth was great for creating a nice flow shaped weld, but by then, I learned I could slowly run stick weld to accomplish something similar. Eventually, I will try using the machine on a 220v circuit.All in all, this is a nice welding machine that is easy to use. Reliability and longevity is yet to be proven.
Recommended Products
$22.99
$ 11 .99 $11.99