Your cart is empty.
Your cart is empty.Wherever your road leads we know cyclists seek the ultimate ride. With that in mind, Serfas is always striving to make products that reflect those wants and needs. Our 20-plus year commitment to quality, performance and customer service is reflected in our innovative products that are rider-tested and rider approved.
Don W.A.
Reviewed in the United States on April 29, 2024
These work well in reducing the numbness in my hands while riding. Particularly noticeable on longer rides.
Michael Hunter
Reviewed in the United States on March 9, 2023
Put this under 2mil Fizik bar tape. Covid shortage and whatnot I couldn't find anything thicker on short notice.This gel does a good job at vibration reduction as well as giving a more well rounded grip on the bar. I primarily ride with long finger gloves with no padding, this provides the comfort of a good set of padded gloves. 5 stars from me, great product.
D. Patrick L
Reviewed in the United States on August 10, 2022
Bought to avoid hand numbness while riding with hands behind brake hoods. Had tried multiple brands of gloves and other tape-on solutionw but nothing really worked well. Trimmed these to fit; added the cut-off piece on top of the placed piece to cover a likely hot spot (double thickness) and wrapped with bar tape. Bar is a little thick but worked beter than expected. Much less numbness even on long rides.
Jimmie Roan
Reviewed in the United States on April 15, 2019
I'm a big guy with big hands. Drop bars have never been great for me because of the diameter - I always feel like my hand is wrapped around itself.I've tried different solutions in the past - slip-on foam grips wrapped in thin bar tape, for example. This made the bars more than thick enough but wasn't the most attractive. Also, I had to use thin bar tape or the bars got too thick, and thinner bar tape doesn't have the best grip to it.This year, I used the gel inserts with a thick, textured tape. I love these inserts. They're firmer than the slip-on foam grips were and, combined with the textured tape, let me ride without gloves.The inserts are easy to install - just follow the directions on the package, trim to fit, stick on the bars, and wrap.I can't think of a single drawback except perhaps if you have really small hands, the inserts may make the bars too thick.
おとみら
Reviewed in Japan on November 18, 2018
よくわからなかった。商品の厚み分、ハンドルが太くなったが、太い方が好みなのでそこだけはよかった。
のお客様
Reviewed in Japan on February 18, 2016
フィジークのものより安く性能にそれほど差はないと思います。どのみちバーテープで隠れてしまうのものなので見た目も関係ないし、安いものでよいかと思います。厚いテープと併用するともこもこになるので、薄めのテープと併用すると良い感じです。振動吸収性はテープとセットで考えるとこれがどれぐらいの効果があるのかはなんともいえませんが。
紅ノ幸村（goe_mon）
Reviewed in Japan on November 15, 2016
タイヤサイズが24インチ以上の車種は、タイヤ径から振動を吸収する能力が高い！このパット入れようが入れなかろうか、ほとんど関係ない！しかし、小径車で、特に細いタイヤで高い空気圧になると、振動が半端じゃない！振動で手がしびれる位です！そのような車種で、ドロップハンドルやブルポーンハンドルの車種には、おすすめのパットです！バーテープと一緒に巻けば効果絶大です！しかし、これだけでは快適には走れない‼バーテープもモチモチした物を選び、グローブもＧＥＬ入りの物をお勧めします！小径車の高圧タイヤには、お勧めです！
Sir Bikesalot
Reviewed in the United States on February 8, 2015
They have a really weird fit. I have 44 bars, and they were even over-sized on them. I had to kind of scrunch them to get them in right, so I don't think I'd recommend them.
ピカレスク
Reviewed in Japan on December 23, 2015
デザイン優先でバーテープまいたら薄くって、なんか内側に巻くモノ無いかな〜と探してたら見っけたので早々購入。バーテープもスポンジタイプ2.5㍉厚で巻いたらかなりソフティな感触(^O^)ダイレクト感を求める訳では無いので気持ちイイので大満足です。
JohnB
Reviewed in the United States on August 8, 2014
These are some sticky pads, dude. Very nice design and it definitely adds an extra bit of cushioning under the bar tape. I think Serfas does a great job of making it as locked down as possible with the sticky backing, and although it may need some readjusting down the line, it does retain the gel cushion even after a lot of riding.
ひろ
Reviewed in Japan on October 24, 2014
グリップ感は堅くなくていいのですが、握り込むと「ズレる」というか少し柔らかすぎるような感触を感じます。 贅沢な悩みなのかもしれません。
Irrevocable Trust
Reviewed in the United States on November 16, 2013
Worked very well. I have big wide hands. The handle bar cut right into the bottom of the palm putting pressure on a ulnar nerve. I used these a little different than designed to solve the problem.First, I did not remove the original padded wrap. Instead I placed the curve section right over top of the old wrap. Then I placed the straight pad, intended for the drops, on top of the most commonly used section. I secured this in place with some electrical tape. I then tightly wrapped the handlebars with a new wrap. Most of the bar has two wraps now, and commonly used sections have three layers of padding, and the most problematic section has four. When I use the drops, the double padding is nice, but it also doesn't press on the ulnar nerve in the same way, so I didn't really need the padding there. Now I have very nice and thick handle bars. They worked great and made the next 50 mile ride much more pleasant.Also, don't assume that I needed to secure the pads in place with electrical tape because they had insufficient adhesive. If I had been placing them on bare and clean metal handlebars they would have worked perfectly. I know, while adjusting the fit I stuck them to the side of the top tube, and they wanted to stay there. But, I was sticking them to well used, oil and sweat impregnated old handlebar wrap. It didn't stick really well there, especially while tightly winding the new wrap.
Richard Richter
Reviewed in the United States on October 18, 2010
This stuff is pretty straight forward to apply. Seems like it could be more padded. It is okay, not sure it really helps enough. If your going to put this stuff on your bike, you may just consider doublewrapping your bars. Wife's bike is double wrapped and that is way better.Nothing wrong with this product, just not great. Needs to be more cusioning.
Recommended Products
