Your cart is empty.
Your cart is empty.IS35 Digital Display The IS35 is used to display engine and vessel related data on the network provided by NMEA2000 compatible engines and sensors. The types of data available for display are determined by the available NMEA2000 sensors on the network. You can use the IS35 as engine display for most types of marine engines, either via a NMEA2000 gateway, or a J1939 to NMEA2000 convertor. (for example the Livorsi CAN Data Gateway). The IS35 comes with 5 pre-configured pages for the most commonly used information when operating vessels. The information on these pages is automatically displayed from an internal hierarchy of available data. The hierarchy was developed from market and customer surveys about which information the boat owners themselves consider the most important information to see on their displays Features Automatic display of prioritized dynamic data types. (RPM, fuel flow, economy, speed etc Bright, full color 240 x 360 LED screen makes it easier to see menus and screen detail in both full sunlight and night operation Menu button doubles as backlight control Simple menu navigation using menu, arrow and enter buttons Easily swap between pages using arrow keys Page cycle with configurable times Surface mount, or flush/rear mount option Pre configured data pages Motoring Engine Monitoring Fuel Economy Depth History Motor Steer Device will automatically detect available sensors on the network and display the most relevant information on the corresponding pages User Interface The IS35 is running on the NOS (Navico Operating System) platform. Anyone that is familiar with Navico products will quickly and easily understand the user interface of the IS35. Power Control The unit automatically starts up when N2K bus is powered. The IS35 can't be powered off but can be put into standby.
dee
Reviewed in the United States on January 12, 2025
I have a 230 WA Seafox with 2003 150 SW EFI 2 stroke Mercury Smart Craft compatible. My goal was to get rid of the all the analog dash items and have a digital dash that will display all the same functions in one display. After researching on boating forums I found that NMEA is the way to go or purchase all the Mercury items that will be at least $1000. I purchase a plug in from a company Fox Marine that plugs into the service port of the engine and connects engine function to NMEA network. With the IS35 I now can see rpm, engine temp ( I could not before), alternator volts, fuel burn( I could not before GPH), engine hours( I could not before) etc all going into the NMEA network.Next I purchase from purchase on Amazon a Lowrance NMEA fuel level sensor and plug that onto the existing connection to my tank. Now I have my fuel level on this device now with how much fuel is being burned. I keep my analog gauge installed for a bit to make sure I know how to read the digital and compare then I just removed the analog fuel gauge. With my Garmin Echomap on NMEA I can navigate to fishing grounds with RPM set to cruising speeds and now how much gas i will have left in the tank and how much I burned during the trip.Now I have a Rasberry Pi with a NMEA 2000 hat on it connected through the network that is used inside the cabin. I dont monitor anything in the cuddy but when anchored and in the cabin I can look at the network and configure stuff. The Rasberry Pi is also connected with a 9" screen to watch TV in the summer hours when I fish all night to get out from the bugs.Just like the cars now MPG boat we now our GPH. Old 2003 boat now has an upgrade!Highly recommend if you want to get rid of all those gauges.
Erich
Reviewed in the United States on February 15, 2022
La mejor opción de compra indiscutiblemente
Mike Swann
Reviewed in the United States on May 9, 2021
GREAT UNIT FOR MERCURY TRACKING.. AND IT DOES SO MUCH MORE
mark renson
Reviewed in the United States on September 23, 2020
It was exactly as advertised. In stallion was easy based on its standardized gauge size. Pretty easy to customize the different pages which I appreciated
Cliente
Reviewed in Italy on August 19, 2020
Completo, veloce, intuitivo e con ottima leggibilità.
Kimber Baker
Reviewed in the United States on March 3, 2019
I Purchased two of the IS35 display and had one of the units menu and up keys fail within 2 minutes. The display is bright and easy to read and I had no issues with interfacing on my N2K network. The seller would not take the bad unit for return and I have to send it to Navico for replacement. I guess I will have a spare in case another fails.
Lamontthefish
Reviewed in the United States on November 8, 2019
So I held off on buying this due to the cost. At the end of the day I pulled the trigger. Straight forward installation- does what it claims and is an effective replacement for my 2016 Honda gauge.
Recommended Products
