Your cart is empty.
Your cart is empty. PRODUCT DESCRIPTION
This twin flame tip is made to fit Gentec and Smith Little Torches. Specially designed to soldering around ring shanks. Heat from the two tips is concentrated on two sides of your workpiece, supplying consistent heat to help solder flow from both sides. Used with oxy-acetylene/propane/mapp. Orifices Size: 0.011” and Fuel/Oxygen Pressure: 3 psi.
PRODUCT SPECIFICATIONS
- Size: No. 3 Type Double
- Orifices Size: 0.011”
- Fuel/Oxygen Pressure: 3 psi
- For Gentec Small Torch and Smith Little Torch
Rick Deokie
Reviewed in Canada on March 14, 2025
Had a weird look but did the job! The tip is very small but I opened it up with a thin drill bit to achieve a thicker flame
Brad
Reviewed in the United States on February 11, 2025
Both flames don't come out at the same size. One of the flames keeps Going Out and I have to keep Lighting it.
R Hill
Reviewed in the United States on March 24, 2024
I've used this type of tip in the past and it's excellent for close in work such as replacing a compressor on a residential refrigerator or under counter ice maker. It keeps the flame pointed at the tubing instead of shooting partially past it and catching fire to whatever is behind it, even with a fiberglass heat blanket. It's not hot enough to go larger than 5/16 tubing. You'll need a large one for that. The problem is not getting enough information on the thread size so I can attach it to my standard Victor oxy/acet mini torch set. I now have to take it and my torch to another company to try and get an adapter to connect it. I'll try to remember to come back here and post what I find to help out others.
Henry @Spades Engineering
Reviewed in the United States on November 20, 2020
The media could not be loaded.
Recommended Products
