Your cart is empty.
Your cart is empty. Specifications:
Product Type: 2.1mm Camera Lens
CCD chip: For 1/3 '' & 1/4 '' CCD chips
Mount: * 0.5 IP Camera
Focal length: 2.1 mm
F-number: 2.5 mm
IR night vision: support
Viewing angle: 150 °
FOV: 160 °
Working temperature: -40-85
Package size: about 10 * 7 * 2 cm / 3.94 * 2.76 * 0.79 inches
Package weight: 6g
Package List:
1 * 2.1mm camera lens
JohnnyB82
Reviewed in the United States on March 6, 2024
Maybe I'm missing something obvious, but I cant find a mount or stl to print a mount to attach this to the camera? What am I missing?
SJ
Reviewed in the United States on December 1, 2024
It works great on the old ring floodlight camera. I spun the old lens out and installed this lens. I used a couple of straight picks and pushed them into the plastic surrounding the original lens and use them to spin the lens out. The new lens isn't a perfect fit but it does get the image close to original. The area around the camera lens will need to be sealed as the lens is smaller in diameter. The lens also protrudes and as a result, the original glass covering the lens cannot be reinstalled. Therefore a good bead of silicone or seal of some kind is critical.
Scott V.
Reviewed in the United States on May 24, 2021
Much better.... Raspberry pi camera160°
Daniel
Reviewed in the United States on April 26, 2021
Lens was defective had internal bubbles and a chip on the sensor side. There was also glue on the threads where it looks like it has previously been used which made it very difficult to twist on.
Recommended Products
