Shopping Cart

Your cart is empty.

Your cart is empty.

Speedokote T-Rex White Bed Liner, 2K Urethane, SMR-1000W-K4 Truck Bedliner w/Free Spray Gun

Free shipping on orders over $29.99

$169.00

$ 78 .99 $78.99

In Stock
  • Easy to use: ADD hardener - SHAKE - SPRAY (see instructions below)
  • Abrasion and Stain Resistant
  • Protects against rust, corrosion salt, damp & extreme temperatures
  • Waterproof, flexible, helps deaden sound & vibrations
  • Provides excellent adhesion


This sale is for 4 plastic quart bottles of White Bed Liner (SMR-1000W) and a quart of SMR-222 activator; which when mixed yields one gallon sprayable. Also included is a mixing cup for measuring activator and a free shutz spray gun to apply the bed liner. Note: If one gallon of sprayable bedliner is not enough for your job, then you may add SMR-1000W-K1 from Amazon. The SMR-1000W is a 1.7 lbs/gallon voc and is the only bed liner that is 50 state compliant. SMR-1000W is a true 2K urethane with outstanding adhesion to steel and sanded paint. This coating is formulated to withstand the same atmospheric conditions as a high quality single stage urethane topcoat. FEATURES: .True 2K Urethane Durability .Uniform White Color .Excellent Exterior Stability from UV Light .Fast Dry .Chemical Resistant Finish Easy to use: ADD hardener - SHAKE - SPRAY (see instructions below) SURFACE PREPARATION: Surface should be cleaned of all grease, oil, dirt, rust, etc before sanding. Wash area with soap and warm water, then rinse and dry. Thoroughly clean area with Wax and Grease Remover. Scuff surface with 180-220 grit sandpaper. Re-clean with wax and grease remover, then dry with a clean towel. Instructions: Apply Bed Liner between 60 - 85 degrees F and humidity less than 70%, Not in direct sunlight. 1. Add 8 ounces of SMR-222 activator to a quart bottle of SMR-1000. 2. Screw on quart bottle cap and shake for two minutes. 3. Remove the cap and screw in the Shutz Spray Gun. 4. Adjusting the air pressure (60-80 PSI) and spray distance will change the texture. 5. Apply a uniform wet coat of bed liner using a sweeping motion. 6. After a 2 minute flash, apply a very light 2nd coat, sprayed at 80 PSI, using a fast sweeping motion.


EZChiko
Reviewed in the United States on July 31, 2024
We used this on our old pop top Coleman. ABS roof came off and we used 3 kits to cover
Ronald W.
Reviewed in the United States on July 20, 2023
Easy to use. Actually sprayed it on my camper since the coating on top had peeled off. Took way more than I expected for proper coverage. Still a good product.
Taryn
Reviewed in the United States on February 21, 2020
I just used this kit with an additional qt (5qts total) on the roof on my pop up camper. It was super easy to use, just make sure you prep the surface and fill cracks prior to using. Our top was in terrible shape, but looks much better now! This won’t fill cracks in the top so we used caulking first and it went over nice. If you’re using this for a pop up camper I’d recommend getting at least 5qts, but I wish I would have had 6qts. A 6th qt would have allowed for a thicker, fuller coat. Pretty happy so far, hasn’t been long but thought I’d give my two cents. Also, make sure you’ve got a good air compressor, one that can run at 80ish PSI consistently.
PlastiCar
Reviewed in the United States on August 16, 2019
Awesome! After being incredibly disappointed with the results of the popular and frankly, overrated "Grizzly Grip" roll on bed liner to refinish my Coleman Pop-up camper roof I decided to try to cover it with a coat of this spray-on T-Rex bed liner. I'm amazed with the results! Very easy to spray, great coverage, and the color is truly a bright white, unlike other products. Highly recommended, you won't be disappointed!
Mr. Greg
Reviewed in the United States on October 4, 2019
Great product. I used it to re-coat the top of my Coleman popup camper. The kit comes with everything you need including measuring cup and sprayer. You just need to supply an ordinary air compressor capable of about 80 psi. Application is easy and product is very nice. For a 12' camper top, I would have liked to have used a little more product, but I am sure it would be plenty for a truck bed. I was able to apply one fairly decent coat, however I think applying a second coat would really be nice.
D. Rob
Reviewed in the United States on April 12, 2019
This stuff is awesome! Like others here...I used it to replace the ABS plastic on my 2000 Coleman Cheyenne tent trailer. I tore the ABS plastic off and decided to roll this on instead of spray because I just didn't have the room to spray it. Worked great! I'm ordering another set of this because I'm going to need eight bottles to finish the camper roof.
TamCord
Reviewed in the United States on September 7, 2018
I liked that it worked! Pieces were a little hard to clean, but overall extremely happy with product. Used it on my pioneer popup camper! went thru all four bottles fairly quickly, probably should have ordered a few extra to give thicker coating. The first pic is before, with holes filled in, and two with finished product. Has held up for two summers! Going to add more coats before next summer.
erock
Reviewed in the United States on June 14, 2017
Worked great to recoat the top of our Coleman popup camper. However, while it did cover the entire roof, it would be even better with two full applications. The included sprayer worked like a charm.