Your cart is empty.
Your cart is empty.Chad sholly
Reviewed in the United States on June 22, 2021
As for the spray in bedliner it seems to be a decent product but only time will tell ,as for the spraygun that comes with the kit( junk) unless you just want to waste material I highly recommend throwing it away and getting a textured spray gun from Harbor freight or at least a better one from somewhere else. If it wasn’t for their cheap spraygun I would have nothing but good things to say, heck if they would’ve knocked off a couple bucks and not including the gun I would’ve have preferred that more
Shane Branch
Reviewed in the United States on May 17, 2019
I used this on the top of my rv. A couple of things to mention here;1. It was a great product with easy application. 2. It is too thin when mixed with the whole quart of supplied thinner. On the 2nd cost I mixed it only half of the thinner and was much stickier and easier to use.
joe
Reviewed in the United States on September 6, 2018
I used this to coat an exterior deck which is also part of the roof for the basement. The deck surface is advantech and I did put a primer coat down first. Used 2 of the 3 gallon kits to cover the 350 square feet with two coats, giving me maybe a 1/16th inch thick surface that is absolutely waterproof and so far handles furniture being dragged across it just fine. The folks at the company were very helpful on the phone.The spray gun did not work well for me. Ended up simply brushing it on. Needed to wear mask, fumes are potent and hung around for several days. Used only about 1/3 of the rubber pieces since I wanted a smoother finish.
Pen Name
Reviewed in the United States on July 17, 2018
To easy. Prep. Tape and spray. Application was very easy, included gun worked amazing. Product layed put very even and looks great. 3 gallon kid did inside and out of my 76 k5. , one key point to remember... you are spraying and a very high psi.. make sure your tape holds.... lots of overspray on glass..... oh well! UPDATE*** 2 YEARS LATER I still love this product, when it gets dirty and muddy I just use a stiff bristle brush and garden hose or pressure washer make sure you prep your surface I had some surface rust bleed tru ( my fault) buesods that still 100% satisfied!
robert gomez
Reviewed in the United States on February 15, 2017
Stuff is great I did my whole f350 crewcab with the 3 gallon kit at 80-100psi make sure you have at least a 8 gal compressor, because this stuff hardens very quickly!!! You have to be fast, if you mix a gallon at a time. ALSO TO CHOSE YOUR COLOR YOU HAVE TO MAKE THE PURCHASE AND EMAIL THEM WHAT COLOR YOU WANT!!! I sprayed this last year on my truck and 2 hrs. Later it poured rain on it I was really scared it was gonna screw it up but it didn't phase it at all it was already hard! It's been thru branches, basketball, stepped on and it still looks new!!! I'm very happy with it and recommend it to anyone they also have a Facebook you can look at!
Seth
Reviewed in the United States on January 31, 2016
Did this nearly 6 months ago. Appears very tough and durable. Be sure to follow the instructions. I used bulldog adhesion promoter just before application and after sanding. I used nearly a gallon to spray the sides of my pickup. The color (desert tan) was quite a bit lighter than I wanted.Also since I used the texture pellets it was very hard to determine how thick the application was and I now have some rust showing through. It should be easy to touch up.Do not try this indoors without the garage door open, it's incredibly smelly.The description says the order will include a spray gun and mine did not, so I had to ask for one. It took another week to get it so that's the reason I did not do 5 stars.
Buckster
Reviewed in the United States on November 1, 2014
Medium gray is just right. Preparation takes some time but is worth it. Bought 3 gallon kit for 02 Tundra Xcab, only needed half so have half left if repairs are needed. Coating looks great and appears to be durable but have only had it on for a few days, not yet completely cured. If I use the other half of the kit over the existing liner, I will not add the rubber to somewhat smooth out the surface. Used 6 gallon air compressor set on 70 psi, had to let compressor catch up but had plenty of time. Put 2 coats on side, 3 on tailgate 6 on bottom.
Anonymous
Reviewed in the United States on May 6, 2013
The media could not be loaded.
Recommended Products
$219.95
$ 89 .99 $89.99
$76.95
$ 35 .99 $35.99