Your cart is empty.
Your cart is empty.Product Description
Spyder Scraper, 3 Piece Multi Blade Set, Includes 1 Each: 2", 4" & 6" Scrapers, Multi-Functional Scraping Tool For Use In Surface Scraping Applications, Designed To Fit All Brands Of Reciprocating Saws, Easily Removes Rubber-Back Carpet, Glue, Laminate Flooring, Linoleum, Wallpaper, Paint, Tile, Etc, Carded.
From the Manufacturer
Spyder Scraper blades are a patent pending, revolutionary new tool that eliminates hand scraping by attaching easily to all brands of reciprocating saws. The Spyder Scraper is made from spring steel powerful enough to break through tough substances yet gentle enough to remove those substances without damaging surfaces underneath. The device can also be sharpened just like any other blade. Spyder Scraper can be used for all residential and commercial scraping jobs: rubber-back carpet, linoleum, laminate flooring, paint, wallpaper, tar, glue and much more. Do-it-yourselfers, contractors and flooring professionals are attracted to the ergonomic design and simplicity of the Spyder Scraper. No more chiseling the day away on industrial or household projects...Simply insert the Spyder Scraper into your reciprocating saw, hold at a slight angle, run the saw at about half speed and let the Spyder Scraper do the work for you. It is also re-sharpenable in order to keep a nice fine edge. Spyder Scraper is available in three sizes to accommodate any job - two, four and six-Inch blades and is made in the U.S. In April 2008, Spyder Scraper was chosen as the 2008 Do it Best Corp "Members Choice" Award and received the New Product of the Year Retailers Choice Award at the 2008 National Hardware Show held in Las Vegas.
Chris O
Reviewed in the United States on July 18, 2024
Worked as expected but with a little effort they can be bent if putting too much pressure on them.
DG
Reviewed in Canada on June 5, 2024
Used these to scrape old carpet underlay. It definitely kicks hard when you catch an errant nail or high spot - but does make quick work of the job.That said, they are fragile - I had the large and the medium sizes snap off at the point where they meet the sawzall after about an hour of use each. Definitely worth it - but realize you might need to buy two sets.
Essential Enthusiast
Reviewed in Canada on March 10, 2024
The generic ones listed on Amazon are nearly half the price and are notably stronger.I broke through 2 sets of these in a few hours before trying the cheaper kind.You don't always get what you pay for.
Customer
Reviewed in the United States on December 19, 2024
Perfect
Jennifer Mavis
Reviewed in the United States on August 6, 2023
Bought this product for removing old vinyl roll flooring that was glued to a concrete slab in the bathroom.Used it with my old Dewalt electric reciprocating saw.Worked very well
Buickbuilder
Reviewed in Canada on August 29, 2020
Great tools. Performed as described and designed. Durable.
Vickie Edwards
Reviewed in the United States on August 23, 2019
I ordered this to help me tear out some nasty old carpet in a 180ish sqft sunroom. The carpet was the old cheapo kind with the padding attached, and it was glued down to the floor. I was expecting a total nightmare of a time getting it out, but the 6" scraper made what I thought would literally take all day into a 1 hour project that only required a helper to lift and pull the carpet as I cleared the padding underneath. I may never need to use again it myself, but it's already paid for itself many times over with the amount of headache it's spared me.
River Rat
Reviewed in the United States on May 14, 2019
Someone else said this is not an air chisel.Bingo! I used these to remove mastic and ~50yr old composite flooring material from hardwood and plywood substrates with my PC reciprocating saw. Tile gone easily even wherein was two layersthick.m, mastic mostly gone but as good as I can expect from this type of tool. Yes I broke two of the three blades but I ran them for about 5 hours each. That is a lot of stress on this type blade material...these are ment to be disposable. I like the idea of reshaping the shaft to extend the useful life. Using on very coarse substrate like damaged or broomed concrete is not advisable.
Carmen Cunnington
Reviewed in Canada on November 2, 2019
These scrapers work amazing! Hands down the best tool to use when removing old carpet underlay or stick down tiles, definitely worth the buy, many multiple uses !
タジキスタン
Reviewed in Japan on January 30, 2018
私は 建物解体の仕事をしています現場では 長尺 Pタイル等厄介な物も多く 以前はスクレーパーやバールで剥がしていました 何か良いものは無いのかと 通販サイトを眺めていた時に レシプロ&セイバーソーで使えるスクレーパーを見つけました❗これは!!と思い即 購入(約9000円位)&使用して見ました長尺剥がしでは 半日位でレシプロ&セイバーソーの接続部に亀裂が…あれ？Pタイル剥がしでは１～２時間で接続部が折れました え❗❗使用した感想としまして 値段の割に強度が弱いです(残念)
H. Lopez
Reviewed in the United States on May 21, 2017
Total failure. I used the 2" to attempt to remove thin-set. The first problem is that the blade is way too thin to handle this kind of material. The second you encounter well-glued cement, the blade will bend. The second problem associated with the thickness of the blade is that it get hot and then it easily breaks. the third problems are that the blade will not stay sharp long enough to complete your task. the 2" blade broke after less than 10 minutes trying to remove the thin-set.I tried to remove a ceramic tile and the blade is just not strong enough to break the tile. I still have the 4" and 6" blade that would do good to remove wallpaper. Other than that, they are a complete failure.I don't know if this is too late to get my money back but if it is, would wish that Amazon would stop advertising these blade as the commercial is 100% false advertisement.
Richard F.
Reviewed in the United States on July 12, 2015
This is a good tool to use to get old flooring up. The blade will break though so an extra set is recommended
Marley981
Reviewed in the United States on November 4, 2015
I used these to remove rubber/adhesive from carpet squares in my basement. I tore out the squares and went to work with these blades in my reciprocating saw. They stay sharp even being used on the cement floor but they snap at the insert into the saw pretty quickly even after letting them cool a bit. I think the issue is that the blade stays cool but at the mount location that saw part of it that holds the blade gets very hot and with it vibrating back and forth on the concrete floor it makes them break easily. It's a shame because there was so much more life left in the blade itself.Watch how you hold the saw because if you put it at too much of angle at the side with the back end of the saw up too high it kicks back on you and will get your attention plus it can chip the concrete a little. Also, don't press too hard on the saw at a downward angle as that will help to snap it more easily. I was taking a break for 30 seconds after running it for a minute to try and help with the blades snapping...not sure if it helped though.
Recommended Products
$18.99
$ 8 .99 $8.99
$29.99
$ 12 .99 $12.99