Your cart is empty.
Your cart is empty.Product Description
Versatility & Ease Of Use
Variable Speed
Allow Change in Speed While Polisher is in Use -
Placed on top of polisher and right in front of the hand grip, the variable speed dial allows an operator to change speed with a thumb while polisher is in use.
One finger-touch operation -
Easy to change polisher speed
Match Stone Polish Speed -
Variable speed control matches the specific polishing speed suitable to various stones surfaces
3 Hole Under WaterLine
Non-Interfering UnderWater Line -
The water line is placed at the bottom on the polisher, it allows clean top surface without any water line for non-interfering faster polishing.
Even Water Distribution -
Three-hole water head each at 120 degrees for even and adequate water distribution. It ensures continuous wet surface at high or low RPM.
Zero Dry Spots -
Water distribution control and 3 hole water flow optimal water flow for zero dry spots during wet polishing.
Water Control-Connect
Quick-Connect to Standard Water Hose -
Built-in water quick-connect adapter to connect to a standard water hose.
Long water line for reaching long countertops.
Stop or Adjust Water Flow While Polisher in Use -
In-built quick-access water control to
- Adjust water flow
- Stop water flow
GFCI & Long Cable
Cuts Off Electricity - GFCI -
Built-in GFCI security against electrical shock while Wet polishing process. The polisher cuts off electricity in case of electrical shock.
Extra Long Electrical Cable -
Industrial grade 12 feet extra long electrical cable line for
- Easy access to long counters
- Easy maneuvering
Ergonomic Handles
Comfortable Handles for Longer Operation -
All three handles (Back, Top D, Side Handles) are ergonomically designed for longer comfortable operations.
Easy to Apply Pressure with Top D-Handle -
Placed right above the heavy head, the top D handle provided adequate pressure on the surface easily for the best polishing result.
General Purpose Ambidextrous Side-Handle -
Can be used for left handed or right handed operations. It is very useful for general purpose grinding polishing.
Head Heavy & Balanced
Less Tiring Longer Operation -
Head Heavy Design transfers the maximum polisher weight on the polishing surface and minimum weight on back handle. It causes minimal pressure on the backhand, and make the polishing process less tiring. It makes longer operations easier and possible.
The ergonomic back-handle works as a guide and comfortable to grip and operate
Balanced - A well-balanced machine for better control
DTM+ Power, Soft Start
Optimal Power For Wet Polishing -
Powerful 800W motor to drive the optimal power. Stone Concrete polishing needs constant speed on varying load, DTM+ Gear System is designed to maintain contact speed giving the best polishing performance.
Jerk-Free Start -
Soft start of the motor for better control and easy jerk-free start. Ensures work accuracy and perfection
One Push Lock Switch
One Finger Touch On-Off Switch -
Placed below the back-hand grip of the polisher, the on-off power switch allows an operator to on and off with a finger.
Continuous Operation Without Holding Power Switch -
The power lock button locks the machine for continuous run, allows the operator to keep the machined powered on without continual pressing on the button. Placed below the back-hand grip, it has quick access while polishing is in use.
Flexible Splash Guard
Polishes Corners and Uneven Areas -
Flexible splash guard can flex to reach corners and provides maximum reach for polishing. It can flush on uneven surface to provide maximum water protection.
Matches Tools Height for Maximum Water Protection -
High-quality rubber flexes to match the reducing height of tools as it grinds down. It creates a flushed cover to provide maximum water protection and coverage.
Arbor Lock
Faster Release of Accessories -
The arbor lock on top of polisher arbor locks the arbor for faster release of tool accessories - backing pad, profile wheels etc.
Optional Wrench Included -
The optional wrench also comes with the tool, the accessories can also be opened with the wrench. Refer to the section, What is the box for the complete list of items in the package.
Double Insulation
Double Insulation for Electrical Safety -
The double insulated polisher provided the electrical safety. Along with GFCI, Splash guard it provides multi-layered electrical hazard safety for the operator.
What is in the box
What is in the Box -
- Wet Polisher
- Water Shroud
- Top Handle
- Water Hose Adapter
- Gear Box Cover
- Side Handle
- Carbon Brushes
- Water Bush
- Wrench
- Manual
Glenn Simmonds
Reviewed in the United States on August 7, 2022
I purchased this polisher to get rid of the scale build up on my pool. I tried all of the chemical methods to remove the scale but finally had to resort to mechanical removal. This polisher and #50 diamond pads worked great! It took quite a bit of time but I am very happy with the results! I never had any issues with performance. No overheating, no leaks. It doesn't come with the attachment to hold the diamond pads so you will have to order that separately (my oversight, but Harbor Freight saved the day!)
TechDr
Reviewed in the United States on June 3, 2022
Now that I have quite a few hours on the polisher I must say that it does everything I need it to do...with one exception. The water valve is horrid, leaking from the first day I used it. A quick trip to my big box store to purchase a much better made 1/4" valve and I had the solution in hand. 1/2 hour with a 12mm, 13mm and 14mm wrench and some Teflon tape and I solved the problem. This is a great lap polisher for the money but please keep in mind your valve may leak as well and will probably need replacing.
Chef Danny
Reviewed in the United States on April 13, 2021
so the good - this stone polisher does the work - I was able to polish a large surface without it overheating, and I did not get an electric shock like some reviewers for a different brand warn. It's easy to control the speed, as well as the water flow.Now - the not so good.1. Defect / missing gasket causes leaking. I connected the brand new polisher to a brand new garden hose. Despite that, The connection between the garden hose and the polisher tube leaked profusely, even after being tightened to the max. A closer examination showed that the polisher side of the connection was missing a rubber washer. It should go under a round metal plate inside the female end of the connection. Water was freely flowing out of the gap. You need to use an Allen wrench + a regular wrench to unscrew the metal plate, add a gasket below it, screw the plate back on, and place another gasket on top of it. For a brand new $200 tool, I wasn't expecting to do have to do these gymnastics.2. Then, after about 30 minutes of use, the trigger got stuck in the On position - means I wasn't bale to turn the tool off. Since I wasn't right next to the outlet, I turned the speed dial down to 1, and then walked to the outlet and unplugged the polisher. If you think this is unsafe - I agree. I'm expecting a rotating power tool to NOT be stuck in the On position. (After some manipulation, with the polisher unplugged, I was able to get the trigger unstuck so it could be used safely.)So - bottom line, this polisher does what it's supposed to, but I expected higher quality for the price.
shivanand
Reviewed in the United States on February 14, 2018
I used the polisher for wet polishing edges of my countertop. It worked pretty well. Couple of thisn I really liked, it connected to my garden hose and I can control how much water to use during polishing. I could stop the water flow completely right from the machine for dry polishing, that I needed at a few places. The machine is very balanced and has plenty of power. Used it to grind down a small ding, it hardly lost any speed when I pressed it hard. Easy to work for long by locking the polisher run.Very happy, the counter looks brand new.
Rod Schlegel II
Reviewed in the United States on November 23, 2018
The tool worked well. A problem I did have was herring the diamond cup wheel off after using it. The supplied wrench bent and to this day I haven't gotten it off the tool.
Ross McMillan
Reviewed in the United States on August 26, 2017
I bought the first polisher a week ago and it lasted less then 8 hrs of working time. The motor burned out. I returned the polisher and got the second polisher in three days which was great. I began using it and in 40 min the polisher motor failed again!! I will obviously return this one and will never by this polisher again. I was hoping it was a one time problem but now its two in row. I would not buy this polisher and I definitely do not recommend it.
R. Donahue
Reviewed in the United States on November 16, 2017
I'm using this on my polished concrete floor project. Using this for the hallways and close to baseboard areas with diamond resin pads. Works great. I especially like the fact that it has a GFI (Ground Fault Interrupter) built in. Added: Used this on 600 square feet of kitchen/dining room floor. Honed to 400 grit then dyed and densified. Wet Ground by pouring water on the floor then mopping up. Worked through all of the grits: 50/100/200/400/800/1500/3000/6000. Took a while but worked like a champ. Never had a problem. p.s. Used a Dremel Multi-Tool with triangular pad for the corners and along the baseboard. Also an outstanding tool.
Kathie Doman
Reviewed in the United States on October 8, 2017
I researched for months on how to polish concrete to make kitchen counters during a remodel over 2 years ago. During the process, I created 5 8"x11" color samples as an experiment with different aggrates and tumbled glass colors. Although, we decided against concrete counters, I got the idea of finishing the 5 little slabs to use as trivots and give as gifts. So, I began using an orbital sander with the diamond pads. It took FOREVER. because the concrete had cured for over 2 years. We also have 2 fireplaces with stained stone hearths...so we decided to buy this Stadea Stone Polisher. IT IS AMAZING! I was a tad disappointed when I opened the box that it didn't come with any backer hub...luckily one came with the original set of polishing pads and fit this grinder. It hooked up to water easily and off I went grinding for 4 hours. The results were amazing! A few tips for beginners like me: 1) Plan time to polish within a week of pouring your concrete, it will save a lot of time 2) You will get soaked with cement water and because of the rotary spin, everything within an 8 foot radius will get soaked too. A note to the manufacurer...the numbers on your "Burst Drawing" are way to small, making the diagram useless...and, please include directions on how to change the brushes you provide for down the road.
Recommended Products