Your cart is empty.
Your cart is empty.HPS 100% Stainless Steel T-Bolt Clamp with Floating Bridge, Size # 44, effective range 2. 25" - 2. 56" (57mm-65mm) provides leak-proof connections in a wide variety of industrial, commercial, and military applications. Perfect matching clamp for HPS silicone hoses with 2" inside diameter. HPS manufacture our clamps from 300 series stainless steel with rounded band edges to protect soft hose materials. HPS Stainless Steel T-Bolt Band Clamps provide high tensile strength, durability, and corrosion resistance. HPS Stainless Steel T Bolt Clamps are the perfect choice for medium and heavy-duty applications. HPS Stainless Steel T-Bolt Band Clamps are frequently installed on Coolant and Air-Intake Systems for Construction Vehicle, Truck, Aircraft, Marine and Bus Engines, Duct Systems, Baghouse Equipment, Irrigation Systems, Medical Equipment and Precleaners. Technical Specification: Size # 44. Effective Size Range: 2. 25" - 2. 56" (57mm-65mm). 100% Stainless Steel Band, Bolt and Nut. Floating bridge and rolled edges to protect soft hoses. Superior welded construction. 3/4" Band Width. Max. Torque Spec 75 in. lbs. Part Number: SSTC-57-65. UPC: 648044843292. Quantity: 1Recommended to be used with 2" HPS silicone hoses
Nick Iacuessa
Reviewed in Canada on January 29, 2020
Great Thanks!
Ty
Reviewed in Canada on May 4, 2018
Very strong clamp, I only use HPS clamps on all my turbocharged vehicles. Including my duramax with 35psi of boost!
Customer
Reviewed in Canada on May 20, 2018
Excellent quality
Rory D.
Reviewed in the United States on April 17, 2018
One tough hose clamp! Make sure you know exactly what size you need, there is a fair amount of cinch but once you reach the end of the threads that's it and if there is any leakage you are out of luck until the next size smaller clamp arrives. Learned that one the hard way. Still, if you need a tight uniform clamp that you can count on this will certainly do the job.
LV
Reviewed in Canada on August 3, 2017
Works very well. Prices is good.
Scott
Reviewed in the United States on April 25, 2017
It's a well made clamp. I bought it for the 2" outlet on my Garrett turbo using a 4 ply silicone coupler. I would buy a smaller clamp next time. It appears to be clamped enough to keep the seal but it is tightened all the way so I have no room to get it tighter if I need.
Jim
Reviewed in the United States on September 29, 2016
I was looking for a secure means to fasten a 5lb Halon fire extinguisher to the rollbar of my Jeep, and regular worm-drive hose clamps just weren’t going to cut it. I wanted something that not only looked a little more “finished”, but provided a safe way to make sure the extinguisher wasn’t going to go anywhere before I needed it. I chose these stainless steel clamps, and after a little trial-and-error in choosing the right size, I knew I made the right choice.For anyone with a Wrangler JK, these are the smallest size that I’d use for the rollbars; you can go larger if your mounting clamp takes up more of the bolt, but for my Amerex fire extinguisher’s mounting bracket, these were perfect.
S. Greene
Reviewed in the United States on May 14, 2016
Used on a 2003 VW Jetta TDI ALH. Broke the stock clamp the connects the intake hose to the EGR valve. Looked around and another stock was going to be at least $8+ and these in my opinion these are better. This is the correct size to use to connect the hose to EGR, After a little searching around I found that these clamps should not be torqued more than 75 in lbs so I torqued mine to 50 and seems to be working great!
amir ibrahim
Reviewed in Canada on October 8, 2016
great
JayO
Reviewed in the United States on January 25, 2016
Great quality, clamps hard. Used to replace the OEM worm clamps on my intake system (turbocharged car). I feel better about having these in place than the OEM, especially during reinstall using performance parts.
Spindler
Reviewed in the United States on August 25, 2015
The description is misleading! The metric measurements are correct but they do not convert accurately to standard. This only clamps down to maybe 2.5". Be careful when ordering. Here is a handy tool... https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=how%20many%20millimeters%20is%202%20inches
nomo7
Reviewed in the United States on October 13, 2015
it works
jay
Reviewed in the United States on December 4, 2013
Man these clamps worked like a charm. Id recommend these to anyone doing a build! So don't hesitate, try it and see!
Recommended Products
