Your cart is empty.
Your cart is empty.Magnetic Flat Mount for the Starlink Mini Antenna
John Mathews
Reviewed in the United States on February 21, 2025
Very nice piece. Very nice quality, holds the Starlink Mini VERY securely and the magnets are crazy strong. Not sure why Amazon won't post my review with my photos, but it lived on my Ultra 4 car for nearly 200 miles of offroad desert racing without issue.
Darren
Reviewed in Canada on February 2, 2025
Used but I haven't had any issues with it
rajiv kaushik
Reviewed in Canada on February 16, 2025
Heavy duty metal frame which grips all 4 sides. Metal is not well galvanized so I would suggest spray painting with rust proof paint.Easy assembly although instructions are not the clearest so you will have to adapt your sequence. I would suggest mounting magnets first and don't overighten. The 4 screws attaching the plate on the right can be a little tricky to get in especially the last screw so keep all screws loose till you get all of them in. Remember that the plate that grips the frame goes on the outside of the frame as shown in the pic, that is not clear in the instructions although very logical. I really like the mount with the only improvements suggested to the manufacturer being better instructions,white color anti rust paint on the frame, higher precision placement of the last 4 set of screws on the plate.
Dale Cardinal
Reviewed in the United States on February 14, 2025
Works great. Never moved once driving down rough ice roads or 80 MPH on the highway. I did use tread lock on all bolts when assembling
Blake S.
Reviewed in the United States on January 9, 2025
This mount is awesome. Simple and easy to use. We took a 13 hr road trip and had flawless service the whole time and this mount never skipped a beat or moved at all, going 80+ MPH on the interstate, and driving through winding backcountry highways.
Rox
Reviewed in the United States on January 4, 2025
We’re often in areas without service when off-roading and I need service always for work! This mount is a game changer. Securely holds our starlink mini on our side by side or truck. I’ve left it on the roof and towed going 70 mph and it didn’t budge! Been in the sand dunes and out in the desert on some rough trails and it stays put. Absolutely recommend this mount if you’re looking for a well made, sturdy mount to secure your expensive starlink. We did have to buy magnet pads separately that adhere to our roofs because the magnets on the mount will not stick to our aluminum roofs. Very impressed with the material used. Feels like my sister in laws pci mount. ⭐️⭐️⭐️⭐️⭐️+++++ easy install
alain methot
Reviewed in Canada on January 31, 2025
Fit très bien pour la mini
Robert Weiss
Reviewed in the United States on January 28, 2025
just drove 6500 miles with it on my protester. worked great, easy to install!
Cat
Reviewed in Canada on January 27, 2025
For that price they should at least make smooth sharp edges on the frame, because it is easy to cut yourself.For positioning the Starlink into the holder I had to bend some edges because it would not fit and scratched the sides of the Starlink.
ColoradoClayton
Reviewed in the United States on January 22, 2025
The mount works great, and it at a great price. It took me 30 min to get the protective wrap off, and another 30 min to file the sharp edges. The packaged washers were for 5mm screws, but the screws are 4mm. So the expectation met the price. And it works.
Mapit
Reviewed in the United States on September 11, 2024
Installing the mount with the dish inside only took a few minutes. I did not drill a hole in the roof of my car for the cable because it will only be there until I use the dish elsewhere.Also, if you use the cable that came with the dish, the dish will not start because of the voltage drops below 12 volts through the long cable. I shortened the cable and wired it to a heavy-duty lighter plug, and the dish started up and worked great.Also, I was concerned that the WiFi signal would not penetrate the stainless bracket and the metal roof of my car. There were holes in the bracket, and I assume they were placed to ensure that the WiFi signal was not affected.One suggestion, use thread locker on all the screws to ensure that they do not come loose.I received a good signal on my first trial, except under roads with a tree canopy. I drove to the interstate, and WiFi speeds ranged from 50MBs to 120MBs down and 18 to 20MBs down, going up to 80 mph.The dish did not move in any way during my drive.The next day we took a short trip going 150 miles and had good connectivity the entire trip. My wife was driving, and I used my iPad for half the journey.It takes both hands to dislodge one side of the dish. Once it is lifted on one side the other side will come up.I recommend this bracket.
photog1514
Reviewed in the United States on December 9, 2024
The mount is heavy gauge stainless steel...extremely sturdy. Right off the bat, plan on spending at least 30 minutes to remove the protective skin that covers the mount and brackets. Once you've peeled away the skin, assembly is very easy and shouldn't take more than a few minutes...all that's needed is a Philips screwdriver, 10mm wrench for the magnet nuts. My advice is to install the magnets first before assembling the mount. If you follow the instructions and do the magnets last, you'll have a hard time attaching the washers and nuts. There is one downside, however...if you plan on using the Mini's kickstand, you may not be able to get the proper angle since the mount becomes top-heavy once its tilted beyond a certain point. Magnets are very strong and keep the mount in place securely...haven't tried driving with it though. I'd give it a 5 rating if not for the kickstand issue.
Recommended Products
