Your cart is empty.
Your cart is empty.This depth adapter kit lets you extend or reduce the mounting depth of one rack unit (1U) in your server rack by up to four inches. If you're using the adapter kit in a two post installation the extenders can support a total weight load of 10 lbs. (4.5 kg). If you're using the adapter kit in a four post installation, the extenders can support a total weight load of 90 lbs. (40 kg), you can even use two sets of extender brackets in a four post installation and achieve the same weight capacity performance. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases. Mount equipment that's too long, or too short You can use this adapter kit to mount equipment in your server rack that's up to four inches longer or shorter than the rack's mounting depth. Save money by mounting all of your equipment in one rack With this adapter kit, you can customize your server rack to support different mounting depths, so you have the freedom to mount equipment of different depths in the same rack. It’s a cost-saving, hassle-free way to consolidate your equipment into a single rack, so you have one server rack to manage instead of two. Cable management flexibility The depth adapter kit can also be used to help manage cables. You can mount equipment 4” in from the rails, to prevent cables from protruding from the rack. You can use the rail depth adapter to mount equipment that has high density cabling, such as patch panels, PDUs or network switches, to minimize the effects of cable strain and provide easier access to the cables. The RDA1U is backed by a 2-year warranty and free lifetime technical support.
zachary
Reviewed in the United States on February 25, 2025
exactly what i ordered
CMIT of Wilmington
Reviewed in the United States on January 7, 2025
These are perfect for open racks when you don't want the patch panel jumper cables to stick out in front of the rack. You simply recess the patch panel and if you have a switch that is rack mounted you can recess the switch as well. This means your connections are protected in high traffic areas. They are also nice in closed racks as well so that your wires don't get squashed by the closed glass door.
Dave Lewis
Reviewed in the United States on May 29, 2024
This worked perfectly and saved me sending back a battery back up unit.
Allan A.
Reviewed in Germany on December 25, 2024
I needed to space some powerbars out and these worked great!
asika
Reviewed in Japan on April 28, 2024
奥行き35cmのサーバーラックを奥行き66cmのラック機器の取り付けを探したらこれに巡り会え取り付けできました。面白いアイテムですね
Flo
Reviewed in France on March 15, 2023
Fait le travail, un peu de jeu une fois monté mais rien de très choquant.Attention les vis fournies ne sont pas de la plus grande qualité et une main trop lourde risquera de « foirer » la tête !
Liz
Reviewed in the United States on November 22, 2023
says what it does, does what it says. you'll get some sag if you use it in extension mode, I had a spare structural support piece that I put one rackspace below my server on the backside that keeps it level.
Brad Ackerman
Reviewed in the United States on October 23, 2023
It says it's a rack depth reducer/extender, and it does that. The only problem is that the equipment side uses rack nuts, which are a right pain. Fortunately, once you do manage to put them on you won't be bothered again. Sturdy enough for a 1G switch, and puts enough distance between the rack's back door and said switch so that I can actually cable it.
Robpol86
Reviewed in the United States on June 14, 2022
I wish I had known about these years ago. They're perfect for my custom TV cabinet server rack. I got lucky where the top two U's were clear of the metal pegs, otherwise these Z-shaped brackets wouldn't be aligned. I reversed them so my patch panel and switch can be recessed into my cabinet so my SFP modules don't bump into the cabinet door.
Gustav Persson
Reviewed in Sweden on December 15, 2022
Using these brackets works both for extending a device out from the rack but also if you want to recess a device inside of the rack - for example a power strip.Pricy but work as advertised and I see no sag for my Switch and Router that I'm using these on.
Loki
Reviewed in the United States on February 18, 2021
I got this to extend one rack component out to the back a bit (I could have reconfigured the whole rack since it was length adjustable but didn't want to throw out and re-do a custom made wooden top I had fabricated for it). It works but mounting it is a bit awkward. Plus no matter how you fix it to the rack, it adds just enough thickness so that my component wouldn't properly clear the back mounting bracket anymore. Took a lot of finagling to make that happen. That's its only design flaw as far as I can see. Other than that did what it was supposed to do.
Hüttenwerk
Reviewed in Germany on February 27, 2019
Habe damit Patchbay und Switch weiter ins Rack hinein verlegt und bekomme nun die Türe vor den Patchkabeln zu. Konnte keine Einbußen in der Stabilität feststellen. Sehr praktisch!
Luke F
Reviewed in the United States on November 24, 2019
I used these to offset some patch panels in my server rack. They work great and help keep things looking clean. However, I DO NOT recommend putting anything heavy on these. The metal is too thin for me to feel confident hanging anything heavier than a shallow/consumer network switch
Recommended Products
$26.99
$ 11 .99 $11.99