Your cart is empty.
Your cart is empty.Product Description
Product Description
Product Specifications
The current is auto-mached with welding rod's diameter.
1/16''(1.6mm)：20~50A（110&220V） 3/32''(2.4mm)： 51~100A（110&220V）
1/8''(3.2mm)：101~140A（110&220V） 5/32''(4mm)：140A（110V） /140~200A（220V）
Welding Polarity
Compatible with 6011/6013/7018 welding rods
- Connect the Work Clamp to the Negative Connector (–) on the Welder.
Compatible with 6010 welding rods
- Connect the Work Clamp to the Positive Connector (+) on the Welder.
Welding Effect from Customers
David
Reviewed in the United States on March 11, 2025
This welder was terrible. I would not recommend it at all.
MARRANA
Reviewed in the United States on January 22, 2025
Work very good
jaimeshawn
Reviewed in the United States on September 15, 2024
The good.. small and light and will do 3/32 rod. It's also crazy cheap. It's really a capable 100A welder. You can do a lot with it. Bad... It's not a 1/8" rod machine, and the rod clamp is pretty bad. The welding cables are something like 8 gage or something else ridiculously small, so I'm going to make some adapters to do a regular welding cable.
Aleksandr Romm
Reviewed in the United States on August 3, 2024
I have already worked with this device. Fast delivery. Low price and excellent quality. It is possible to supplement the functionality. I intend to purchase a TIG torch. In this case, you should pay attention to the diameter of the tip, which is suitable for the TIG torch. Tips of the required diameter can be purchased separately.
Fernwood
Reviewed in the United States on August 23, 2024
First, this is the smallest 200 amp stick welder I have seen. It is about 1/2 the size of the stick welder I bought on Amazon a year ago and am very happy with. Second, I am a hobby welder with a farm. Don't weld every day or every week but on a farm there's always repairs to be made to equipment and it just isn't cost or time efficient to call a professional welder every time I need something welded.I have 2 shops at the farm, a couple of miles apart. I was thinking how handy it would be to have a second stick welder at my remote shop. Save me a lot of time and fuel having to move a big piece of equipment from one field to the other.I saw this Sunstac 200A welder for sale at a great price and it seems to be of the same lineage as the welder I bought last year. I plugged it in, set the parameters. stick, 5/32, VRD OFF, Hot Start 5, Arc Force 5. I had a piece of 1/4 inch plate with surface rust I hit with wire brush. The synergic function of the machine set the amps at 174. I put an old stick of 5/32, 6013 in the stinger and lowered my mask. I struck an arc the second tick on the plate and proceeded to lay down the entire rod without issue. I pulled out and pushed right in close to the plate to test arc force and it kept going through the entire rod. I paused a minute to let the machine cool a bit and put another stick of 6013 in and repeated my test starting it on first tick and laying down a fat bead with no issues. After the welds cooled I knocked off the slag. Is a 6013 weld on a lightly rusted piece of metal going to be pretty? No, but the penetration is good and that's how welding goes on the farm sometimes and if it will do this with old 6013 you know 7018 on a clean metal is going to be easy. Will it last for years? Whom knows, but if you need to get a piece of equipment back in the field so you can get your seed in or your hay baled before it rains you don't care. It's a cute little bugger with HOT 200 amp stinger! Just buy it!
Jeremy wingate
Reviewed in the United States on July 11, 2024
Been welding for 20 years and this is a great machine I have zero complaints about this purchase! It runs 7018 like butter very impressed for the cost and the size of this machine ! It is now my go to machine for around the house and for my vehicle
Decius
Reviewed in the United States on February 9, 2024
I have had this machine a few months now and I know the good and the not so good. On 110 it will do little repairs with 1/16 rod and 3/32 just don't push it. On 240 it indeed will burn 1/8 7018 but mine will hit the duty cycle before the whole rod will be consumed. I do like the weld profile, it resembles my Lincoln 305 weld. But I also can see that at higher amps the stability is not as solid . Will it replace my main welding machine,NO , is it a AWSOME tool in my box YES. Unlike others I am not a fan of the small size . But if they come out with a better more stable one I would like to have it. Update, was contacted to install a thumb kit on a mini excavator, I wanted to use my sunstac welder . Loaded up 8000watt generator,sunstac welder and went to the machine. Thumb was constructed of 3/8 and 1/2 inch steel plate. They were amazed to watch me get my little machine out and weld the kit to the boom with 6011 hot and 7018 on top so hot I almost burned through the 3/8 plate. Think I sold 3 of these welders for them that night.
Moisés Martinez
Reviewed in Mexico on November 6, 2024
TRABAJA MUY BIEN HASTA EL MOMENTO..
Christopher Grady
Reviewed in the United States on September 3, 2023
I'm a full time welder and run my own welding and fabrication business. I generally run AC stick welder and a Mig. I got this because I needed a DC stick welder on a budget. I have been searching on here for quite a while now but was honestly weary about the cheap ones after multiple bad reviews. I came across this one and it only had 1 single star review and the rest good. I decided to pull the trigger on it. I received it today and immediately unboxed and plugged into my 220. I have some 7018 1/8" rods I decided to start with and it ran them smooth as butter! Great penetration and all! I ran some 3/32 as well and those ran just as well. I even did a few shut off and ons to be sure the machine will come back on. It does set the amperage a little too high for 1/8" rod selection at like 137amps...1/8" runs fine at 115amp so you'll have to make sure you set the amperage right. All in all, I highly recommend.
Recommended Products