Your cart is empty.
Your cart is empty.Temperature humidity and dew point data logging in a miniature, self contained device. The SL series data loggers provide concise measurements for critical environmental conditions. Windows 98SE, 2000, ME, XP and vista and above compatible software included, not compatible with windows 95 or NT. PC, delayed start or push button recording control, temperature alarm with visual indication on demand. User selectable stop on memory full or memory rollover for continues recording, real time monitoring. Can calibrate through software, displays temperature in degree F or C. USB Interface standard (cable included). For temperature and/or humidity sensitive applications: refrigerators/freezers, greenhouses wine storage, museums commercial refrigeration systems, florists medical storage facilities, laboratories. Sample point capacity: 21,672 for temperature, humidity and dew point. Sample rate: 1 second to 18 hours. Alarms: High and low temperature and humidity alarms with visual indication on demand. Temperature range: -40 F to 160 degree F (-40 C to 70 degree C). Temperature accuracy: +/- 1 degree F (+/- 0.5 degree C). Temperature resolution: 0.1 F or 0.1 degree C. Relative humidity range: 0 to 99 percent RH, non condensing. Relative humidity accuracy: +/- 2 RH from 10 to 90 percent RH. Relative humidity resolution: 0.01 percent RH. Calibration: single point offset calibration available through software for both Temperature and Humidity. Time accuracy: +100 ppm at 75 degree F. Power source: 3 V (CR2032) lithium battery (included). Battery life: 6 years typical. Measures 3" length by 1-19/32" width by 19/32" height. Weight: 1.0 oz (28g).
Anthony P Volta Jr
Reviewed in the United States on May 11, 2020
I only used this item 4 times then I couldn't extract the data from the logger. When I connected the logger to the computer I would get the tone from the computer indicating the computer and the logger connected; however, when I tried to get data, as I was previously able to do, I got a message -Error 300 Did not find logger connected to the USB port. I've checked the connections several times with the same results. I restarted the computer and got the same results. After the success from the first (4) times and obtaining the data, I was pleased with the device. Now after only (4) successful attempts and now failures, the device is useless to me.
jim duncan
Reviewed in the United States on November 1, 2020
Iv'e been using the Supco SL300th dta logger for 3 years in a drying operation where the keeping track of the temp an humidity are fairly important. I'm using a 65ft USB booster cable hooked up to win 7 and to date it's been rock solid. And I have no concern about losing the data like I did when I was using a Davis weather monitor.Does a really good job.amended 5/29/21This review about the about the 2nd sl300th logger that I've recently had a problem with. The first one that i recommended refused to be recognized by win 7 in Dec. 2020. Even though tech support tried to help, win 7 just refused to recognize it. So I purchased another at the end of Dec. 2020. Plugging it in to the computer win 7 found it and it had been working correctly until 29th of May 2021 when the same thing happened that happened to the original logger. win7 couldn't find it. So I've ordered a 3rd one and if when it's plugged in, it works then I have to assume that it's the logger not my computer. If it does work then my current one is going to be sent back to Supco to see if they can figure out what's going on. It's possible that the "signature" is being wiped out. B ut they will have to say.I will amend this review when I have further info. But right now be I don't recommend this logger. Especially if you need the data.
AR
Reviewed in Canada on February 16, 2019
Simple et efficace si écran non requis
Hughbie
Reviewed in the United States on June 27, 2018
Super data logger. I use it in air conditioning, refrigeration, and green house applications.It’s not water proof tho! Protect it with a plastic bag where it could come in contact with water through hose spraying or diggers.
Steve M.
Reviewed in the United States on February 5, 2018
Works great, have used many like it and always does what I need it to do.
Blake
Reviewed in the United States on January 6, 2016
Absolutely wonderful tool for logging temp, humidity, and dewpoint. Has been great to use in refrigerator repair, but was also great for my son's science fair project on snow caves comparing inside and outside temperatures with and without people on the snow cave. I highly recommend. The software presents the data in easy to read and print graphs.
Dr. Hardcrab
Reviewed in the United States on September 21, 2015
I work at a continuing care facility which includes cottages and apartments with about 650 residents. We get complaints every now and then that it's "too cold in our apartment" or it "gets real hot in the middle of the night" or "it is too humid in the afternoon" (and various others). Very easy to program the apartment/cottage number and place in the residence for any length of time. Then we print out a graph that we can show to the resident AND have a record of any future questions we may have about the history of the location. Great little DEPENDABLE unit that I would recommend to anyone!
0
Reviewed in the United States on January 14, 2015
awesome, just this to set the levels on my two humidifiers in the basement that are always wrong and now i know that each is off by at least 5% and the other is off by 10% ish. my home thermostat also controls the humidity in the winter time and that was also off by a large amount. so this let me measure and make sure the humidity was properly set in the house. also adjusted the thermostate calibration to match to this unit.used it in my kegerator to get the temp in there and to log that my brand new fridge was not working to get a new one sent out. used it in the fridge to set the temp in the fridge/freezer and also in the spare fridge with the (1-6) dial, so i have a good temp on a specific number. use it in my camper / summer winter to log the temp inside/outside to keep it in good shape.overall love it so far, two years no issues. nice graphs/charts with the software downloads to pc/windows no problems. love it.
Curtis H Hisel
Reviewed in the United States on February 2, 2014
I bought my first Supco SL200 about 8 years ago, it served me well. I used the 200 to check out suspect refrigerators then give the graph to our professional appliance repair guy, they also used the SL200. The SL 200 was great, but it had a "serial" connection, so it was becoming hard for me to be able to use it on other computers. Our appliance repairman had already purchased the SL300T in 2010. The 300T has a USB interface and a lot more memory. The battery is easier to replace, etc. etc. . The graph is about the same as the 200T, but you have a lot more days you can record! A plus point was that it came with a very long cable, (my USB ports are on the back!). I purchased the SL300TH, (the H stands for Humidity) so I could do more than just refrigerators. So far, I have used it to check the temp and humidity in my house, (I live on the Oregon coast), and several other coastal houses. The graph is great when I need to demonstrate to tenants how the temperature in there house correlates to the moisture on their windows. In short, I love this SL300TH, just in case you did not already get that. Curtis
Recommended Products
$180.00
$ 83 .99 $83.99