Your cart is empty.
Your cart is empty.Product Description
-
1.1 lb
SuperCast 500g
[Wax Filled Strong Print] Wax filled resin that offers strength and stiffness, making it capable of casting ultrafine filigree designs
[Low Burning Temperature] Burns out completely even at lower temperature without any trace of ash
[** Important Notice **] SuperCast doesn’t need the post-curing process. The post-curing will result in incomplete burning
[8K Precision] Extremely low viscosity allow for high-resolution 8K 3D printing of objects at high speed with 22um resolution
-
2.2 lb
SuperCast 1000g
[Wax Filled Strong Print] Wax filled resin that offers strength and stiffness, making it capable of casting ultrafine filigree designs
[Low Burning Temperature] Burns out completely even at lower temperature without any trace of ash
[** Important Notice **] SuperCast doesn’t need the post-curing process. The post-curing will result in incomplete burning
[8K Precision] Extremely low viscosity allow for high-resolution 8K 3D printing of objects at high speed with 22um resolution
-
1.1 lb / 2.2 lb
SuperRigid 6.0 GPa
[40% of Nano-Micro Ceramic Powder Filled] 40% of nano-micron ceramic powder filled for strong industrial grade ceramic like prototype
[High Modulus Ceramic-Like] 6.0GPa tensile and 8.0GPa flexural modules simulating stiffness of ceramic
[Ceramic Like Texture] High density and surface texture simulating ceramic, stone, cement
[ISO 10993-5] Properly cleaned and fully post cured SuperRigid prints pass ISO 10993-5 test
RECOMMENDED LAYER EXPOSURE SETTINGS FOR 3D PRINTERS
These settings were measured and tested for a 50μm layer thickness. Adjust the exposure time by ±15% based on your printer's conditions. Colored prints were tested using the recommended number of pigment drops per 100mL of clear resin.
is jim
Reviewed in the United States on February 22, 2025
The product is highly toxic, you cannot use it indoors. we had to remove ourselves from the house for 6 days to detoxify the house with an ozone machine. we ventilate the house for 6 days. I would not repurchase this product. The product works but it is not the best product out there.
AndrewR
Reviewed in the United States on September 28, 2024
While not exactly like it, this does have similar properties to carving wax, namely that it should bond to your wax tree and pieces when melted against them
Morteza Safi
Reviewed in the United Kingdom on July 8, 2024
it was just a waste of my time doesn’t burn out leaves too much ash
ZA
Reviewed in the United States on May 20, 2024
Can't seem to get it to print correctly could be a user error worked for my first print but I've tried a few other times and no luck just makes the bases then nothing.. found it hard to find the print settings I should use for this as well.
Jaser
Reviewed in the United States on March 5, 2024
Easy to get printed but the quality are not that good specially for casting not good in all, definitely not recommend for casting work.
gustavo
Reviewed in the United States on March 25, 2024
Los tiempos de exposicion no son del todo preciso , la resina no se quema , los anillos de resina se me partieron al quitar de la placa , aplico alcohol y agua caliente , de todos los años quitando soportes me quebra la pieza , ni hablar de quemar la resina y si sale un anillo con poros ni con disco diamantado los quitas no la compren
Jacob Stevens
Reviewed in the United States on March 17, 2024
Comes out soft but if you cure it will go hard. Very good detailed
Muy buena resina
Reviewed in the United States on January 30, 2024
Muy buena impresión, casting excelente cero porosidad
Siaskiewicz Daniel
Reviewed in France on April 6, 2024
il est impossible de configurer les imprimantes pour qu'elles impriment correctement, le contact avec la sortie et le support technique n'existent pas
水江陸
Reviewed in Japan on September 20, 2023
造形精度は悪く感じなかった。ただし、鋳造精度は過去最低と思える出来であった。買ったことを後悔した。画像には違うキャスタブルレジンの鋳造品も並べましたが、違いは見ての通りです。焼成時間の調整が必要なことは存じていますが、ここまで酷いレジンに当たった事が悔しくてならないです。メインのスプルーはワックスですので鋳肌はとても綺麗にあがっています。洗浄、乾燥そして、キャスタブルレジンでは一般的に必要のない2次硬化まで行い、レジン液の残渣による不良が無いよう細心の注意を払いこの結果です。もちろん2度と買わないし、多量に残ったがいずれ硬化させて廃棄致します。みなさんがご購入される際の注意喚起になればと思います。キャスタブルレジンは他にも多数ございますので、そちらをぜひお使いになって下さい。
Gerardo
Reviewed in Mexico on October 6, 2023
La calidad de impresión es increíble, llego muy rápido y en buen estado.
Marci Mel
Reviewed in Canada on October 5, 2023
I only cast one ring and it came out pretty good in silver at a casting house with a regular wax burnout. The settings for elegoo mars 3 pro are not very clear. I believe that with the proper 3d printer settings this resin could be a good option for jewelry casting.
Recommended Products