Shopping Cart

Your cart is empty.

Your cart is empty.

The ROP Shop | 3600 PSI Pressure Washer Pump 2.5 GPM, 6.5 HP for Simpson 90036, 90037, 90028

5.0 (3) Write Review
Free shipping on orders over $29.99

$199.99

$ 96 .99 $96.99

In Stock

About this item

  • FEATURE: Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM. Maximum HP: 6.5 HP, Male Outlet: 22mm Threaded, Standard Garden Hose Inlet. Shaft Diameter: 3/4" Horizontal. 4 Bolt Pattern: 2 9/16" Center to Center between Outer Holes. Maximum Temperature: 140° F. Refer to images 2 and 3 for more information
  • BUILT TO LAST: Pump includes (1) Horizontal Triplex Pressure Washer Pump with Keyway, Hose, Chemical Injector, Unloader Valve, Thermal Release Valve & Oil Reader; comes as shown in the first image
  • SIMPLE INSTALLATION: This pump mounts horizontal and MUST have the oil dipstick pointing up when mounted (the oil cap can be switched to the other side of the pump to allow for mounting in the opposite direction). Pump needs at least 6.5HP to handle PSI. Pump head CANNOT be flipped
  • COMPATIBLE: Replacement pump for * Honda GX200 engines with 3/4" shaft * Dewalt DH3028, DXPW3025 * Simpson 90036, 90037, 90028 * Simpson Mega Shot MS-2750, MS2750 Mi-T-M 3-0414, 30414, 3-0297, 30297 * Briggs & Stratton 193486GS, 198347GS * Himore 309515003 & more
  • NOTE: It is not recommended to run any pressure washer pump above its maximum PSI rating. Doing so can result in damage to the pump (not covered by warranty) and/or serious bodily injury


Product Description

Pressure Washer Pumps Compatible Brands

  • Many pumps are. However, compatible replacement options do vary depending on your pressure washer’s engine shaft diameter & engine orientation, the original pump’s bolt pattern, and your engine's horsepower.

  • Your original pump was likely a strap-style (or bow tie) pump. That style isn’t made anymore. However, you can remove the spline and use your model number to find a replacement pump that you’ll install directly onto the shaft with a keyway.

  • Our pumps do require a keyway for installation onto the engine shaft. If a keyway is pictured in the listing, it will come with one. If you need to purchase one separately, you can do so from our catalog.

  • Many of our pumps don’t require oil maintenance, but some models do need oil changes. Generally, pumps with an oil vent port will need regular oil changes. Pumps without that port are sealed units and don’t need oil changes.


John E Atkinson
Reviewed in the United States on June 24, 2021
The only complaint I have is it didn't come with any paperwork (manual). I understand that it was purchased as a refurbished pump, but thought it would have paperwork so you know what maintenance to perform or oil to add.
Customer
Reviewed in the United States on September 11, 2020
Seems to be a great little pump so for. Very impressed with the pressure, makes 3600psi as advertised according to my gage. Very easy to change, 4 bolts and slide onto the shaft. This pressure washer was given to me by a friend who purchased it new, with only a few short hours on the tool the pumped failed. He gave it to me a few years ago and I just recently took the time to do anything with it, the needle bearings were gone from the original pump, engine would start it build pressure and get hot and seimp it would restart after cooling. Anyways I shopped around for a new pump preferring a tri-plex over the cheap axial cam style. For just a little bit more I was able to have a much superior pump for just a little bit more money. I don't care much for the cart that came with this unit, but as stated earlier it was a freebie and will serve as a backup. I highly recommended this pump to anyone looking to replace their 3/4" horizontal direct drive pump. The engine is a Honda gc190.
Beaver
Reviewed in the United States on October 1, 2020
The pressure pump was a great buy all connection where as advertised thank you Amazon