Your cart is empty.
Your cart is empty.Product Description
Thermal Grizzly Aeronaut
Perfect cooling for beginners
The high surface protection and excellent thermal conductivity of Aeronaut make it ideal for all users looking to effectively optimize their cooling system or to replace the thermal paste supplied with their hardware.
Available in four sizes: 1g | 1.5ml | 3ml | 10ml
Surface-friendly and durable
Aeronaut protects against micro-scratches and remains stable even at high temperatures. This ensures your cooling system maintains its performance while being gentle on surfaces. You benefit from high long-term stability without electrical conductivity.
Application Tools
Aeronaut 10ml is supplied with two applicators to facilitate the application of the thermal paste.
Application of Thermal Grizzly Thermal Paste
Apply a small amount of thermal paste to the CPU
The surface should be thoroughly cleaned and free of grease before use. We recommend using TG Remove or TG Cleaning Wipes for cleaning. The thermal paste should be at least at room temperature when applied.
Spread the thermal paste
When applying, it is important to spread the thermal paste very slowly. For a typical Intel or AMD CPU, a single spreading motion should take about 3 seconds. The slower the movement, the easier it is to spread the paste evenly.
K.B
Reviewed in Germany on February 8, 2025
Wie nicht anders zu erwarten ist die Leitpaste exakt das was ich gesucht habe.Die Temperaturen liegen im erwarteten Bereich.Die Verteil Hilfen welche dem Päckchen beiliegen müssen mit etwas Gewalt auf den Aufsatz der Spritze gedreht werden was ich bei diesem Produckt tatzächlich nicht erwartet hätte.Aber die Verteil Hilfen funktionieren sehr gut.Wer ne gute Leitpaste sucht ist hier nicht falsch.
Petriborg
Reviewed in the United States on January 10, 2025
Used this to re-paste my 5900x rig after doing a tear down and total system cleaning.
Azulmic
Reviewed in the United States on August 6, 2024
Not too overpriced, comes with a couple spreaders in the variation i purchased, and those help to conserve how much you use. Also doesn't dry easily. Nothing to complain about really.
JD Melendez
Reviewed in the United States on May 23, 2024
I bought this thermal paste thinking it was the Thermal Grizzly Kryonaut. My fault I didn't read carefully. The paste itself is great for low voltage CPUs and entry level systems. In order to keep my 13700k at a good temperature with this I had to undervolt. I changed it my thermal paste today to the MX-6 today, and like magic the temps dropped almost 20c while gaming. 5 star because it's good for what it was intended, entry level systems. 1 star to myself for not reading
Matthew Sowle
Reviewed in the United States on December 8, 2024
This thermal paste came in nice packaging and was a good value. I have not had any issues with the temperature of my PCs using this paste. The provided applicator and spreader made installing this very easy. I would say this paste is just as good, if not better than other major brands.
Darrel
Reviewed in the United States on December 21, 2024
I enjoy the amount you get. Always good th have some extra.
JC
Reviewed in the United States on December 11, 2024
Paste Applies easily, appreciate the included spatula, and instructions for application. Provides optimal thermal readings. Would buy again.
Rommes frank
Reviewed in Belgium on December 4, 2023
Rien a dire excellent pate thermique
Vikrant gurung
Reviewed in India on August 2, 2022
Worse product.......You will regret
PC Nut
Reviewed in the United States on September 20, 2021
I recently built a high end gaming rig and have applied this paste to both my CPU and video card. The CPU (i7 11700K) is overclocked to 4.9GHz on all cores cooled by a Noctua NH-D15 with am aggressive fan curve and the GPU (EVGA RTX 3080 Ti FTW3) is overclocked 250 MHz with memory OC of 2100 MHz also with an aggressive fan curve.While I did not get a chance to test the CPU on a common paste with the initials AS, I did get to compare the video card's factory paste vs. this. Temps dropped a whopping 8C under load from 66C to 58C with that 3080 Ti on the exact same fan curve and ambient indoor temperature (70% fans after 60C, indoor temp of 76F or 24C).The application requires very steady hands as you need to apply the paste to the entire chip unlike other pastes that just require dot or line application using the heat sink install force to spread it. The applicator/injector helps a lot. All in all I am sold on this stuff after years of reading raving reviews on hardware forums thinking they were paid advertisements. This is the real stuff. Speaking of that, make sure to check the authenticity of what you get and being from Germany with a small document referencing that. There is an increasing level of fraud out there.
Undecided
Reviewed in the United States on August 2, 2021
This paste may not be for everyone as it’s mostly used for overclockers or when you delid a cpu.Used this after delidding my PS3 both the RSX and CELL cpu, done it successfully after my first try. This helped a lot, even when I jailbreaked my PS3 to help with fan curve it was a bit loud, but now I can run my fan at 35% while keeping it under 75-60 depending how demanding my games are.Compared to before I had to use auto at 70c which kept the fan speed at 50-60 at the most and it was loud but manageable if you get used to it but it’s hard to use it during the night since my family members are sleeping.Other than that awesome paste especially when it comes to performance or when temps really matter, a lot of people say that all paste are the same and it shouldn’t matter, but when it comes to overclocking or temp performance even a 2c drop matters the most, well to me everyone has different opinions.
Pred
Reviewed in India on August 1, 2021
Been using for almost a year now.... before use, my old stock paste probably dried of and cpu broke it's own heat record with 103°C...after I used this paste, cpu doesn't cross 50°C at standby and 70° at max load with turbo boost...well I have a stock intel cooler with heatsink so yh, that's a healthy temp for me...since it comes with a spatula which has a diagonal cut in the end, it's easier to apply...use the rice grain paste spread method where u put a small puffed rice size of paste and then spread as evenly as possible...and yh, ur good to go...the tube may last for like 6 uses ig...so don't freak out by seeing it's tiny size...after all it's high performance so ur good to go...I'm probably gonna buy thermal grizzly pastes in the future too once this runs out so don't hesitate to buy this...
Brunet
Reviewed in France on August 27, 2020
Après quelques blackscreen inexplicables en jeu, j'ai décidé de jeter un coup d’œil à l'état de la pâte thermique de ma CG (alors celle-ci n'avais pas plus de 5 mois), et là surprise, quasiment plus un pète de pâte ce qui expliquait mes problèmes de blackscreen (surchauffe). En recherche d'une pâte de marque ET de qualité je me suis finalement tourné sur cette Grizzly sans trop m'y connaitre en pâte thermique.Produit très bien emballé (pâte sous-vide) et donc facile à conserver pour les prochaines fois. Petit kit pour étaler la pâte sans se salir et elle est très facile à étaler quoi qu'un peu trop liquide peut être. Bonne performance pour la dissipation de la chaleur je n'ai plus de problèmes de surchauffe, logiquement je recommande !
Recommended Products