Your cart is empty.
Your cart is empty.Shopper
Reviewed in the United States on January 28, 2025
This interfaces with TT's proprietary fans and enables the motherboard RGB header to handle the lighting. I use it with two 200mm Riing Trio fans and no issues after months of use. It's a shame the in-the-box controllers for these fans just never work right, but at least the company offers a working solution.
Enver beler
Reviewed in Turkey on February 13, 2024
Ürün kullanılmış ikinci el kutu yırtık açılmış ürün çizik ve kedi tüyü dolu amazona yakışmadı
Honest Buyer
Reviewed in Canada on August 14, 2023
Thermal take has a software problem once they fix that I'm sure it would be great, plugs into SATA instead of molex so that's a huge plus also
Kevin Eduardo
Reviewed in Mexico on June 9, 2023
El controlador funciona bastante bien, lo uso para controlar 4 riing quad con la placa base y va de maravilla.Sólo puedes usar ventiladores de Thermaltake, ya que son envidiosos y utilizan conector propio (usb 2.0 de 9 pines)Este controlador no es posible utilizarlo con el software de Thermaltake.Hay gran cantidad de ventiladores de thermaltake que puedes utilizar con este controlador.9 riing plus.5 riing trio, riing quad.6 swafan.5 toughfan.Para ser un controlador dependiente de la motherboard es algo caro, pero teniendo en cuenta la complejidad de hacer un adaptador para poder hacer funcionar los ventiladores ( que si se puede) es fácil optar por este.Tambien se puede conectar toda la serie Pacific RGB, que es los accesorios de refrigeración custom Thermaltake.
David
Reviewed in the United States on July 26, 2022
There is no clear way to bridge 2 of these for your computer. I have 15 fans and 1 cpu block. Sadly any attempts to bridge 2 of these were met with failure or significant slow speed on the fans connected to the second Sync. Not sure if I am doing something wrong. Other than that good product.
Demarey Baker
Reviewed in Canada on July 12, 2022
I love this product. Shipping was great and it works great. The only issue I had was that the rgb connector didn’t fit well on the motherboard. However, I got something to hold it in place and then it was good. This is a great replacement for whoever is tired of using thermaltake rgb software.
Natalie Jackman
Reviewed in the United States on June 16, 2022
This is a great device. I'm using it on my MSI Prestiege X570 Creation board on a jrainbow port. It works like a charm requiring only the wire that comes with the device to be plugged into the device and the header on the motherboard plus one sata connection for power. It does not require power.The only limitation is that it all is treated as one zone of LED so everything is the same color. If you are using these for fans it also has connections for PWM fan control which is huge. I didn't need this aspect of the device because I'm using it for the RGB in the Thermaltake RGB fittings for water cooling so I cannot comment on how well PWM works but it is there.I wish that this device had a magnetic back instead of requiring velcro. It's minor so I didn't ding a star for the omission but my Corsair Commander Core XT devices in the machine are magnetic and it makes them easier to work with. Hopefully one day a future revision of this will have the feature too.
Erin
Reviewed in the United States on May 20, 2020
Product was surprisingly shipped out. I mean that exactly how I typed it. They actually shipped it. Other Thermaltake products took weeks to ship, not this item. To bad it doesn't work as intended. Thermaltake has problems all the way around, from shipping, to returns, to quality control. The fan controller has a bad port. All of my other fans work, except that one on that bad port. I imagine that's not all that's not working, as my Aura Sync can't control the fans, as this product is supposedly for. It does not function in those regards.Not the first product from Thermaltake that had some problems.I'd avoid Thermaltake until they get their act together. They make nice LOOKING products, that function great on paper, but not in real life.I regret going the thermaltake route.
Randall Hansen
Reviewed in the United States on September 27, 2019
Bought this controller for the Riing plus fans and controller set previously purchased. The controller that came with the fans only allowed power to pass through, so the fans would spin, but no lights and no control could be had. The Riing plus app. did not work and would not "find" the controller. The Thermaltake TT Premium Edition LED Controller got the fans to work as they should. (A sale by design?) For power I had to get an adapter cable to connect the SATA to my 4 pin molex. The three pin connector plugged into the 5 volt port on the MB, ( Gigabyte Z390 Ultra) The fans plugged into the hub. kicked the power back on and I had fans with the lights! Down loaded the Gigabyte Fusion app. and control was mine. So far all is well. If a change should occur I will edit this post and share the info.
Andrew B
Reviewed in the United States on September 1, 2019
Someone who wants to hook up their LED fans to their motherboard to sync all the lighting in their case probably cares about keeping a tidy case, so the mounting options should be something with a little bit of thought put into it. The velcro provided was poor quality, I'm skeptical if it's really 3M like the backing says. The adhesive stuck to the controller, then the velcro itself ripped off of the adhesive so now I have a sticky square on my controller but not sticky enough to hold the velcro on. I'm also disappointed that there is no other mounting options besides velcro (maybe a screw hole or two in the case to attach it somewhere, or a loop to run a zip tie through?). In the end I rigged up velcro straps around the whole thing to hold it in a convenient place.I'm also disappointed in the instructions that are out of date and/or just wrong. They said I needed to use the 3-pin RGB cable for my Gigabyte motherboard, but my z390 Aorus Master has 4-pin ARGB headers which match the 4-pin cable that came with the controller. The 4-pin cable worked fine for me.Also a minor nitpick - the cable sheathing on all of the products in this line are excessive and make them hard to route and manage well in a small area.EDIT: Coming back to add a new issue I've had. I can't 100% attribute this to the fan controller vs the motherboard, but it seems to likely be this controller. If I have another ARGB LED product plugged into my motherboard at the same time as this, the other product flickers colors once in a while. The moment I remove the fan controller from the motherboard the flickering stops. The fans from this controller never flicker no matter how many ARGB products are hooked up, but other devices flicker if connected at the same time as this controller.
Ads
Reviewed in Australia on November 12, 2019
The problem with this product and all the thermaltake tt rgb plus eco system products is that they are a nightmare to set up and get working. I'm several thousand in and I'm an experienced pc builder but I still can't get them to work properly whether I use Thermaltake's own software or the recommended motherboard rgb software suite. I have stalked relentlessly Thermaltake, Gigabyte and Asus forums and the problems with their stuff are well known, there are a lot of frustrated people out there. Don't go down this rabbit hole, I have lost days of my life trying to make pretty colors on an otherwise very functional rig. Danger turnaround.
Recommended Products
$22.18
$ 10 .99 $10.99