Your cart is empty.
Your cart is empty.Product Description
We are global eCommerce company specializing in thermal and smart innovative products.As the world of technology evolves, we always look for ways to improve and develop new products to stay in line with the latest technology.
K-type Pipe Clamp/ K-type Alligator Clip
This K-type thermometer thermocouple probe is compatible with any other thermometer measuring meter that accepts k-type probes.
RTD Temperature Probe
Resistance Temperature Detectors are temperature sensors that contain a resistor that changes resistance value as its temperature changes. They have been used to measure temperature in a laboratory and industrial processes, and have developed a reputation for accuracy, repeatability, and stability.
- COMPATIBLE BRANDS: PerfectPrime, Fluke, Flir, Extech, Omega and other brands thermometers that use a K-type probe
Works With PerfectPrime Thermocouple Thermometer
PerfectPrime Thermocouple thermometers are electrical devices used to measure the temperature of objects to which a thermocouple is connected to. They have up to 4 thermocouples connected to get readings from 4 points simultaneously, the type of thermocouple used will determine the temperature range, sensitivity, and more. Also, thermocouple thermometers are versatile and accurate in measuring temperatures in a wide range of applications. Download our free software to set up data logging and analyze collected data.
JUAN CARLOS
Reviewed in the United States on February 17, 2025
Excelente
Rosemary
Reviewed in the United States on June 14, 2024
No less or more breakable than its peers. Does the job, and that’s about it. Far more durable than Fieldpiece or UEI
juan f.
Reviewed in Mexico on March 20, 2024
Fácil de usar y preciso,buena calidad,exelente gracias
Farmer
Reviewed in the United States on February 8, 2024
This is a direct replacement for the probe used on my Auber fan controller I use on my BBQ smoker. The original probe got crimped and had an intermittent fault - after 8 years use. This probe is accurate and reads within 1 degree of my other probes I use. I use them between 40f and 300f temps and they always match each other.
T. Bonini
Reviewed in the United States on July 13, 2023
I ordered this to replace a failed temp clamp on my aging Field Piece 3 manifold set. I don't use this all that much anymore but when the original clamp broke, I needed a new one. I ordered this one as it was a good price and as I said before, I don't use it all that much anymore so I couldn't justify spending over $100 dollars on the Field Piece replacement. Sadly, as they say, you get what you pay for. The third time it was used (in two years), when I removed it from the line set, the clamp shattered. It is made out of the thinnest material possible and simply squeezing the handles to open the clamp was more than it could handle. It is built more like a toy than a tool and is now trash. I will be ordering another one from a DIFFERENT supplier and if it looks anything like this piece of garbage, it will be sent back immediately. I am writing this review to anyone that is thinking about ordering this product to look elsewhere because it does not have the durability to do its job and when in the field, you need your equipment to be reliableand this one simply is not.
Buddy
Reviewed in the United States on May 15, 2023
Pipe clamp thermocouples generally seem to be overpriced and under engineered. I keep the primary pair I’m using in a zippered pouch along with a few other items. Sometimes it gets carried from the van and sometimes it gets placed in a tool bag. The pipe clamps I’ve used typically have one of two failures. Either they break near the pivot point or the wires break near the clamp or near the plug (usually near the clamp).Not only is this metal clamp in the running for the cheapest pipe clamp, it works well and holds up well too. It seems to handle BOTH smaller and larger lines than most of the other clamps I’ve used. It handles all the way down to 1/4” and up to at least 1&1/8” (I may have used it for bigger than that but I know for a fact I’ve used it on 1&1/8” many times). I have yet to have one break which accounted for about 1/2 of the failures I experienced with ALL of the other plastic ones. I have FINALLY had to replace 2 because of wire breakage but they lasted A LOT longer than any of the plastic ones ever have and for a fraction of the cost. The various plastic ones tend to cost 50%-300% more than these.The accuracy seems to be comparable to the other thermocouple clamps. Thermocouples just aren’t as accurate as thermistors but these have appeared to be in line with other clamps.
Customer
Reviewed in the United States on October 25, 2021
Wire is short and resistance was bad after a few weeks of daily use. Bad enough to really mess with temp readings.
Benson Kroeker
Reviewed in Canada on September 16, 2020
Yeah it’s a good probe, my only complaint is pretty specific. I fix ovens so it’s kind of annoying with how stiff the metal cord is and how long it is, if you’re just checking temperatures around home no problem, but if you need to use this every day it will get a little annoying.Plus it retains heat quite a bit compared to other cords on sensors, so keep that in mind when removing from the oven.
Karl Knips
Reviewed in Germany on January 8, 2019
Nach 5 Einsätzen in einem Haushaltsbackofen zur Temperaturüberwachung bis 240° C fiel der Fühler plötzlich nach einigen Wackelkontakten komplett aus. Äußerlich ist nichts zu erkennen, so vermute ich einen internen Kabelbruch.Jedenfalls war die Einsatzzeit recht kurz, wenn es auch zunächst den Zweck der exakten Temperaturmessung erfüllte.
Frugal Gourmet
Reviewed in the United States on January 19, 2019
Wow! 860 degrees Fahrenheit while using the self-cleaning cycle of our Frigidaire Professional gas range. (Per an undocumented search on Google, the cleaning cycle should max out at 900 degrees.)This $10 K-type thermocouple with alligator clips plugged right into our $33 RISEPRO 4 Channel K Type Digital Thermometer. While the combination cannot compete with the likes of Fluke meters, for a quick check on our outdoor gas grill, or indoor oven, this appears to be respectable and useful. This addition to the digital thermometer permits clipping to the interior of the oven or gas grill and provides a higher maximum temperature exposure. The other standard leads confirmed that the adjacent cabinets remained safely cool if the doors were kept open.I have discovered that the reading appears to be influenced by several factors including: ambient temperature of the total cable, total time that the thermometer has been "on", and the effect of cycling the thermometer on and off.
Customer
Reviewed in the United Kingdom on May 3, 2018
Dobry servis.
PeterJ
Reviewed in the United Kingdom on December 5, 2017
These clamps are substantially made, and if treated correctly should last a long time. The tip of the thermocouple is welded to a curved metal plate to ensure good contact with the pipe. The lead is clamped at the end of the handle to prevent loading and breakage of the tip weld. I bought two to balance the central heating radiators. They agree with each other, and with a mercury-in-glass thermometer at room temperature, so no measurement errors to worry about. I looked at a number of different makes, and these seem to be the best-made that I could find, and the price is very good considering the quality.
R
Reviewed in the United States on June 28, 2016
NOT good for the liquid line (the thin line) from an A/C compressor. Might work for very specific uses, but definitely not that great for smaller diameter piping. I had bought it before more reviews illustrated this fact, so hopefully the feedback encourages the vendor to make a note.....in BIG LETTERS. DO NOT USE FOR HVAC LIQUID LINE. THE LEADS WILL SLIP OFF THE LINE, and INCORRECT READINGS WILL RESULT.
Recommended Products