Your cart is empty.
Your cart is empty. This product is Front & Rear Set for Husqvarna / Rim Size: Front17×3.50MT Rear17×4.25 MT/Tape Width: Front 42mm Rear 42mm/Part Number: FR354H(MADE IN JAPAN)
CONTENTS
①Pre-cut nipple tapes②Double sided sealing tape③Protective sheet④Air valves⑤White cotton gloves⑥OUT☆EX sticker⑦English manual
The materials selected for this kit have been proven to be highly durable with heat-resistance(up to 140 degrees C.) weather-resistance and adhesion.
Leftover of tape can be used for repairs like spoke replacement after installation. Installation of the tubeless kit requires some basic mechanical skills and knowledge.
Others needed for the installation: degreaser/brake/parts cleaner, alkaline detergent, clean cloth/rag, scissors, utility knife, sand paper(#100-200), hair dryer.
FAQ of the tubeless kit
Q1 How difficult is the installation process?
A1 You don't need to have a special skills or talent, just read the instruction and follow properly.
Q2 There was some installation issue or damage causing an air leak? A2 Leftover of tape can be used for repairs like spoke replacement.
OUTEX is not responsible for failure, Due to incorrect installation,getting damaged during installation,and also tire changes.Please do not hesitate to ask anything and expect enjoy riding with your body.
Matthew Williams
Reviewed in the United States on January 25, 2023
I bought this kit for my 2023 DRZ-400SM after a nail incident. Per the instructions, they say to grind down any heightened locations from the spoke nuts. Per my experience this is a very important step. As you can see from my pics I skipped that step due to all the reviews online saying how great this stuff is. Low and behold, it initially stuck to the rim but eventually pulled away. Fortunately I noticed this before spooning the tire back on. If this were wider tape, this would not have been an issue. The outer width of the tape only goes about a 1/4" past the widest portions of the spoke nuts. I'm sure this tape is plenty wide for the front wheel (spoke nuts are more inline on the front wheel), but on the rear the spokes are more offset. I ended up fixing the tube and tire and pulling all the Outex stuff, but may return with some 2" wide 3M 4412 in the future to finish the job. The Outex in this kit was only a little over 1.5" in width.
Recommended Products
