Your cart is empty.
Your cart is empty.Many trucks and cars come equipped with Transmission Oil Coolers to maintain consistent operating temperatures for the transmission system. External Transmission Oil Coolers offer additional cooling capacity and efficiency for specific cars and trucks that have them. In addition to the Transmission Oil Coolers that are embedded into many TYC Radiators, TYC is excited to also offer externally mounted Transmission Oil Coolers.
Paul B.
Reviewed in the United States on September 10, 2023
Although it doesn't fit the factory mounts. very little modifications had to be made. I opted to make a cross member out of a piece of flat stock I had in the shop. drilled some holes and bolted it in place. fits nicely. Pleased with the outcome.
Michelle
Reviewed in the United States on April 13, 2023
Used this for my 2008 Chevy Silverado, worked perfectly. Great buy!
519jacye
Reviewed in the United States on April 22, 2022
cooler fit as stated, but leaked after one day, should have purchased OEM cooler instead of trying to save a few dollars.
John Keenan
Reviewed in the United States on September 13, 2021
Even though my Tahoe came with a "towing package", an auxiliary cooler for the transmission wasn't part of that package apparently. I was previously seeing temperatures of just over 200 degrees in heavy traffic without towing. With this installed ive seen a reduction of 30 to 40 degrees depending on weather and driving conditions. It's a worthwhile investment even if you don't tow anything.
Matteo
Reviewed in Canada on January 17, 2021
Took a picture after the fact but this product is great people say it's missing the mounting brackets for the top. The reason it doesn't have the upper brackets is because it was redesigned so they are not needed. Excellent product!!!!
V G B
Reviewed in the United States on September 10, 2019
Trans oil cooler mounted up just like the original. Thank you for including the new fittings, they clipped on the pipes in seconds. No leaks and performing beautifly. Highly recommend!
JB
Reviewed in the United States on November 21, 2019
This unit exceeded my expectations. While the mounting will be different than the stock cooler, it does mount up solidly. I used the existing push clip holes in the bottom of the stock mounting frame with the two bolts from the original top bracket to bolt the bottom of this unit in. Looks like you would need to widen the mounting frame holes in truck but I did not have to in the end. It just worked. For the top I used bailing wire with 4 wraps on each side and a horizontal set of loops too. Very solid setup and was done mounting this in minutes.
M. Corsetti
Reviewed in the United States on September 14, 2018
Need to he a little handy to install. It is labeled as a 07+ trucks not earlier so that could be why. But my 2002 silverado needed to open up the holes in the frame it bolts to and I whipped up a set of brackets for the top. I looked into the oem ac delco cooler and it mounts the same way and does not have top brackets like the original so it must be a design change for some reason. I just used two flat pieces of aluminum stock put a couple of bends and a couple of bolts and had a new top bracket.
Wyatt
Reviewed in the United States on May 28, 2018
The media could not be loaded.
Recommended Products