Your cart is empty.
Your cart is empty. ★ Upgraded 1/4" Hex Shank PVC Pipe Inside Cutter
★Are you worried about cutting PVC pipe?
Our inside pipe cutter is different from most products on the market. We investigated the needs of consumers and created a new and upgraded inside pipe cutter. First, our inside pipe was upgraded to a 1/4 hex shank. , compatible with most standard electric drills and drivers; secondly, the saw handle has a scale, you only need to determine the depth you want to cut, and directly fix the transparent adjustable guide on the scale shaft, you can accurately cut The perfect flat surface eliminates the need to use a ruler to measure, greatly improving your work efficiency.
★What are the uses of this inside pipe cutter?
This inside pipe cutter can help you cut PVC pipes such as shower sewers, toilet connection pipes, bathtub pipes, sewer pipes, etc. This inside pipe cutter provides everything you need to cut pipes accurately and efficiently, whether you are a plumber or For DIY enthusiasts, I think this is the tool of choice for cutting PVC pipes.
★Is it difficult for novices to use?
I must say that it is not difficult. You can follow the steps on the pictures on our product details page to install it. Please note that:
1. Please tighten all screws before use, and make sure the label side of the blade is facing up, so that the arrow is consistent with the forward direction of the drill bit.
2. To protect your eyes and fingers, please wear gloves and goggles when using rotary tools.
3. The saw blade is very sharp, please keep this set of inner tube cutters out of the reach of children to avoid injury.
★ Attention:
1.Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.
2.Please allow little measuring deviation due to manual measurement.
Joanne F.
Reviewed in the United States on January 26, 2025
Good value. Did the job I needed to cut otherwise inaccessible drain pipe for shower remodel . Just be patient and go slow for best results cutting inside PVC. Would recommend
Sandy
Reviewed in the United States on July 3, 2024
There are times when you are repairing a PVC pipe and you can't find a way to cut from outside, not enough room. Cutting from inside of the pipe using the transparent depth stopper made it much easier to use and see inside what I was cutting. It did cut the pvc easily and slower speeds are better. I recommend the product.
WDB
Reviewed in the United States on July 1, 2024
I used for the title the part of this kit that is the most useful for what I do. I really don't mess with PVC much so cannot speak to how well this works for it's intended purpose. Based on how well the blades work I think it probably does a great job on pvc cutting. I can see how useful the depth gauge would be in making straight cuts on pipe pretty good concept. I use the blades for removing pieces of wood at the bottom of these Mugs and cups I make from tree limbs. They are usually about 3 to 5 inches deep and it's not easy to remove all the pieces left over from using chisels. A Dremel like tool is optimum but finding durable blades isn't easy. This kit uses a 14" shank that fits in both impact and drills. I would rather use something lighter and easier to control but these do a great job. I may see if I can just buy replacement Blades if they last long enough.
JP
Reviewed in the United States on June 30, 2024
I had to cut my pipe to use a repair toilet flange, and this worked great. it cut the PVC easily, although too high a speed can cause the PVC to soften, so keep the speed medium. I really liked the transparent depth disk, as it allowed me to see what was going on inside the pipe.
B. Brooks
Reviewed in the United States on June 28, 2024
Upon picking this item up, I didn't realize that it wasn't for typical 3/4" or 1/2" water pipe. Therefore, I couldn't truly put the item to the test. Now, that being said I did examine this kit very well, putting the pieces together etc and examining quality.First, the blades are super sharp, oiled for their protection, and fit perfectly on the drill shank. Also, the large piece, to prevent you from cutting to deep is of great quality as well. It tightens using a tiny Allen wrench. Also, included are screws and nuts, that tighten the blades to the shank. All items are contained within a little box, that is the size of a couple cd cases stacked.In my opinion, this will have no problems cutting through PVC pipe or thin metal, when the time arises. If only they had included blades for normal water pipe! However, this was my error and the title doesn't make that really clear.Reviewing: Upgraded 1/4" Hex Shank PVC Pipe Inside Cutter (4 PCS Titanium Coated Saw Blades), PVC Cutting Tool with Scaled Adjustable Depth Gauge for Cutting PVC Pipes, Plastic Pipes
DesertDweller
Reviewed in the United States on June 21, 2024
The media could not be loaded.
geek
Reviewed in the United States on November 25, 2024
Poor quality. The ball bearing housing comes apart; the locknuts for the guide and blade are very fragile and don't hold. Buy a real tool
eatplaysleep
Reviewed in the United States on October 31, 2024
I bought this tool specifically for cutting 2-inch schedule 40 PVC as part of my pool heat pump setup, but it struggled with the job. The tool kept coming apart under the pressure, which made it impossible to complete the cut, and I eventually had to give up.The tool’s design is clever, and it feels durable and well-made overall. It’s also simple to assemble, with a few extra replacement parts included, which I appreciated. However, during use, the cutting guide’s nut loosened from the rotational force more than once, even after reassembling it to make sure it was installed correctly.Additionally, I found that you need to use the larger blade for exterior cuts; otherwise, the guide can interfere with the pipe and block the blade from reaching the surface properly. Even when it did work somewhat, the blade often slipped off, and the resulting edge was uneven and jagged—nothing like the smooth cut shown in the product images.While I may try this tool again on different materials, it didn’t meet my expectations for working with 2-inch PVC on this project.
Recommended Products
