Your cart is empty.
Your cart is empty. US85POLY is a high-quality, two-component, 85% solids polyaspartic floor coating distinguished by its extended working time and high-performance properties. This product delivers a robust, durable, high-gloss finish that maintains its aesthetic appeal in both interior and exterior environments. The advanced formula of US85POLY ensures excellent adhesion, resistance to stains, chemicals, and UV degradation, making it an ideal solution for creating resilient and attractive flooring in commercial, industrial, and residential spaces.
Product Highlights Extended working time of 20-25 minutes Long pot life for more flexible application Clear, UV-resistant, non-yellowing, high-gloss finish Strong adhesion to various substrates High chemical and abrasion resistance Improved resistance to tire staining Easy 1:1 mix ratio for simplified preparation Easy to clean and maintain Low odor, high solids formula Ideal Applications UV-stable top coats 1-day polyaspartic floor systems Residential and industrial flooring High-traffic public spaces Restaurants, bars, and cafeterias Aircraft hangar floors Garages and auto service areas Dog kennels and laboratories Locker rooms and restroom facilities Workspaces and common areas Final layer for various flooring installations Instructions Ensure the surface is clean, dry, and free from any contaminants that could affect adhesion. Mechanically prepare the concrete to a CSP2 profile, typically by diamond grinding. New concrete must be cured for a minimum of 28 days. Repair any cracks prior to application.
Mix 1 part A with 1 part B by volume using a low-speed drill and jiffy mixer until the mixture is homogenous. Apply the coating at a rate of 150-200 sq. ft. per gallon, using a squeegee for the initial application followed by back-rolling with a 3/8" nap roller. In high heat or humidity conditions, use an 18" roller in a dip and roll method to adjust for the faster working time.
Avoid application at temperatures below 40°F or above 95°F, and in conditions where humidity exceeds 85% or the temperature is less than 5°F above the dew point. Ensure proper ventilation during installation and curing.
TJB
Reviewed in the United States on March 20, 2025
Good product. It was close, but this was just enough to cover my 20x20 garage floor makeover project.This was the best price I could find online. Shipped super fast, packed well. All good.I researched the project for weeks; rented concrete floor grinder, 3 gallons epoxy base, 40lb full-flake kit, and this 2 gallons polyaspartic top coat. Came out AMAZING!
Joe
Reviewed in the United States on January 5, 2025
Used this to top coat my epoxy floor I just finished. Doing my shop (attached to my home) one half at a time. Some things you should know:-This product is thick and needs proper mixing. I stored mine inside and mixed it inside prior to applying which made it easier to work with.-FUMES. I wore a respirator while mixing and applying as the warning labels scared me quite a bit. My house smells horrible now. After doing some deeper digging online, there are quite a few people who have issues with the odor not going away after the quoted time frame. It smells like the big silver Sharpies if that gives you an idea. Very overpowering, as if you had one shoved into each nostril. I have the garage door cracked open (left it completely open while it cured) and windows open with fans running to ventilate it but it doesn't seem to help. I am a bit worried about the health of myself and my dog now. If the smell doesn't subside we may need to go stay at a hotel for a few days.The odor is so bad I regret installing it. I also ordered more than needed but Amazon does not accept returns, so not sure what to do with the extra.
Pearl
Reviewed in the United States on January 19, 2025
Topcoat over previous garage floor finnish
Zienna
Reviewed in the United States on January 10, 2025
A little more expensive than epoxy resin but dries completely in 30 mins so no dust gets embedded and does not turn yellow. I tried 4 "anti-yellowing" epoxy products and they all yellowed in a few weeks. This polyaspartic product is worth the extra money.
Mark C.
Reviewed in the United States on December 10, 2024
I purchased the US85POLY polyaspartic for my basement floor. I installed it over a primer layer of Resinus US100MVB moisture vapor barrier epoxy in our basement that has some moisture issues, mainly with moisture vapor coming up through floor. After the epoxy setup for about 6 hours I applied the US85POLY with Resinus light grey pigment, the coverage was as described in the product instructions. I flaked this layer to refusal with Torginol flakes, finishing late in the evening. With the 48 hour re-coat time I was able to skip working on the floor for a day and followed up with the clear top-coat around 32 hours later. This layer took more than expected, but I found that I was not very diligent with the flat squeegee and ended up with areas with too much poly. This is the first time I have ever attempted any floor coating so starting with 830 sqft out of a total 1450 sqft basement may have been a little much. I did all the work myself so it has been a tiring job, but overall am very pleased with the result. The smell of the US85POLY was more than expected but within 8 hours my wife, who is very sensitive to chemical vapors, was fine with it as the smell was completely gone from the house. This was in our basement that only has two of those small windows so my only ventilation was one in and one out with a fan in it. We did open some windows upstairs to let out any smell that lingered. Although I maybe should have, I did not wear a respirator during any of this process. As a comparison, I used a polyurethane caulk to seal around the inside of the rim board and blocks a few months ago, it smelled much worse and lasted for over two weeks...wife was NOT happy.Alexander at Resinus was very responsive and helpful through email with the many questions that a first timer would have. Thanks to him I had great results. I will definitely be buying more Resinus product when I do my garage floor next year.
Recommended Products
$59.97
$ 31 .99 $31.99