Your cart is empty.
Your cart is empty.Leapers UTG Pro Ruger 10/22 Picatinny rail mount. Features: - the Michigan difference- enhanced precision, material strength and quality control, replacing our classic mnt-22towl - precision machined from Aircraft grade aluminum with matte black hard coat anodize - 4.67" length with 11 Picatinny rail slots for dot sights, rear sights, and flexible positioning of magnified optics for proper eye relief adjustment - low profile design with u-cut for weight reduction - contoured bottom perfectly fits Ruger 10/22 with drilled and tapped receiver. Includes: - Assembly screws for simple and friendly installation - no gunsmith required. Specifications: - rail type: Picatinny/Weaver - number of rails: 1 - material: aluminum - length: 4.67" - width: 0.83" - height: 0.35" - weight: 1.30 oz - color: black
Eddie HONEST USER
Reviewed in the United States on January 4, 2025
Lined up perfectly on my 10/22 to move the scope back for eye relief.
DS
Reviewed in Canada on January 14, 2025
Fits perfectly and seems sturdy.
Scott A
Reviewed in the United States on June 24, 2024
This mounted right up on a 10/22 build with the holes aligned perfectly and no wobble. It has held steady through several months of rimfire competition and over 500 rounds.
That One Guy
Reviewed in the United States on May 26, 2024
For the price you’d think it would be just good enough to get the job done but after installing and using it along with many other rails I found it’s very well made with excellent fit and finish. Make sure you torque down properly with recommended torque spec as you would with anything else and depending on your optic and ability you’ll have no problem getting 1/2 grouping at 50 yards in a matter of a few shots. Ended up getting a Kidd extended rail later on (another amazing review on that) but when my wife brought home a 10/22 that came with some junk rail I had to pass this on to her with confidence knowing its potential and she was stacking tacks in no time at all. Highly recommend.
Dan From Mass
Reviewed in the United States on December 1, 2024
Swapped the stock rail off my 10/22, this fit right on with stock screws. Worth it!
David B.
Reviewed in the United Kingdom on October 26, 2024
👍✔👍
Bill Ryan
Reviewed in the United States on January 22, 2024
The rail fits exactly as advertised and looks great. My only complaint is the plastic and cardboard packaging allowed for most of the tiny screws to fall out prior to opening.
PEYRIC Jean-louis
Reviewed in France on April 24, 2024
Excellent matériel, livraison rapide
Customer
Reviewed in the United States on August 26, 2023
I have a takedown 10/22 that I have equipped with a Williams peep rear sight fitted in the factory dovetail in the barrel. I have tried several scope bases on the receiver from factory to Powers Custom and a couple others big name brand bases and they all partially block the peep sight aperture when the optic is removed. This USA made UTG Pro has a radius groove cut down the center so it in no way blocks the rear peep’s aperture. I don’t know if it would block the sight if using the factory fold down sight so I can’t address that.It was easy to install, has T marks, if that matters, and comes with an extra mounting screw to cover droppage. My only complaint is they did not give you a torque setting for tightening the screws. However, 10 INCH pounds seems perfect and is what another brand of base recommends. The machining is perfect as is the matte black finish. Scope rings mount up perfectly and fit and placement of screw holes is perfect.While you big name brand fanboys who do more showing off and proclaiming how much you spent on your firearm will not be impressed, if you actually use the device you’ll have no complaints at all.
welder314
Reviewed in the United States on June 20, 2022
Made in USA. Machining quality and finish excellent. Measurements are dead on, including mounting holes. Included are 5 screws because they somehow knew that I would drop one and never find it. The screws fit perfectly, and stop short of protruding into the receiver's interior by about .020".Now the one thing that would make this even better is if it were longer on the back end. There is over an inch of extra space on the rear of the receiver where this could have been made longer. I mounted my scope as far back in the rings as possible, and mounted the rings on the rear-most slots, and still have to move my head forward on the comb. If they make one that's longer, I'll buy it.
RC
Reviewed in the United States on October 8, 2020
Needed a new mount for a scope for my Ruger 10-22, just upgraded the rifle with new trigger group and s/s threaded barrel. The old model was a tack driver, but in closer examination, had some wearing on the breech face/chamber, the rifle is over 30 yrs old, and used it for trapping and target practice in usually inclement weather.The mount is perfect, well made, and mounted right to the receiver, a little blue never seize and it took about five minutes to mount. Again, I would highly recommend this mount. Works good and should last for a long time.
joan garriga
Reviewed in Spain on January 27, 2020
exactamente lo que buscaba
romain orban
Reviewed in France on May 27, 2019
Le rail a de la pente et dans le mauvais sens. Impossible de régler mon optique même tourelle à fond le point d'impact est trop bas. Les vis sont très bas de gamme. Seul point positif les trous sont aux bons endroits.
Recommended Products
