Shopping Cart

Your cart is empty.

Your cart is empty.

Utoolmart Adjustable Die Wrench, 55mm ID, Zinc Alloy Carbon Steel

Free shipping on orders over $29.99

$9.99

$ 4 .99 $4.99

In Stock

About this item

  • 【Dimension】-Fit for round die size: M24-M27 ; Fit hole size: 55mm Dia.
  • 【Marterial】-This die holder is made of zinc alloy, carbon steel,finish with plated chrome,high hardness, good toughness.
  • 【Circular Die Wrench】-For making new threads, taking off additional material or when the thread is so badly damaged.
  • 【Easy to Use】-Adjustabel die handle has plain die stock handles to make it easy to grip and control.
  • 【Advantage】-The equipment is important to the process of creating uniform threads on different types of screws, bolts, and pipes, essentially, is a frame that helps to keep the cutting tools in alignment, thus ensuring that the threads are evenly spaced and are cut to the specifications required.



Product Description

round die

  • The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened

  • Round dies are suitable for general purpose threading. Can process, correct or clean the external threads. Ideal for maintenance and repair work

round die

Strong locking and not loose; Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic

round die

Die size is etched on the surface for easy identification

round die

Made of alloy steel, hardness and wear-resistance for long service life

Round Die Stock Handle Wrench

Made of zinc alloy, carbon steel, finish with plated chrome,high hardness, good toughness

Round Die Stock Handle Wrench

With a rugged construction that hold the die firmly in place; Can easy to install

Round Die Stock Handle Wrench

With plain die stock handles to make it easy to grip and control

Die can be installed in die wrench using manual processing threads can also be mounted on the die holder on the machine to use

round die

Craig P.
Reviewed in the United States on January 16, 2025
Long tool afforded extra leverage making it easy to cut threads, even in hardened brake rods
Linda Marie Rosa
Reviewed in the United States on February 7, 2024
I bought this for using one of the dies I got in a kit from Harbor Freight. The die fit inside, but wobbly and definitely not snug. The set screw that came with this tool wasn't even tapped in straight, but off to the side where it doesn't align with the notch on the die. Hence, the die just kept slipping when I got down to business, no matter how tight I made it. The lack of snugness of the die inside the stock made the whole tool non-precise. Finally, when my threading got close to the end, the side just broke off. Poorly made, weak and clumsy. Definitely not for threading real metal pipe of good quality!!
FRANCOIS
Reviewed in Canada on February 8, 2023
Pour bricolage,
Norman W.
Reviewed in the United States on March 11, 2022
as good as it's going to get
Bob Robertson
Reviewed in Canada on January 8, 2022
A good quality 55mm die stock
powerpackager
Reviewed in the United States on September 1, 2021
It works. It seems very stout. Treat this as a kit or unfinished tool and I think you will be happy with it for infrequent use. I would not recommend it if you need to use it a lot. It's too rough and crude.The set bolt is just that, a bolt. Unscrew it, put a bit of a dog point on it with a grinder to fit the drive divots on the die.Also, probably help to clean the extra paint off and if you can come up with a spacer system, the die will seat more consistently. As received, the recess for the die is much deeper than the die is tall (dim along the axis). If the die is placed all the way into the depth of the holder, the set bolt does not line up with the drive divots.With some mods, I think the die handle could be made to hold both a die and a guide to help make sure the tap axis is concentric with the tube axis. I didn't do this yet, so it is an idea only right now.Overall, I rate it a maybe. I used it to convert a Raleigh proprietary threaded steer tube to standard 1"-24. It worked, but was really stressful because it was a one shot deal. Get it right or lose the original steer tube on a vintage bike fork. Be aware of what you are buying and prepared to deal with its weaknesses.
Customer
Reviewed in the United States on March 31, 2021
Die fit and adjusted perfect. Both handles can be removed if needed. For the price, works fine.
cris Kennedy
Reviewed in the United States on February 28, 2021
It did the job but you could tell it was a cheapo tool. Came in a box with nothing but Chinese calligraphy so couldn't tell much from box till I opened it.
Pam
Reviewed in the United States on April 8, 2021
Harbor Freight sells a great set of 4 pipe thread dies, but they do not offer a die stock to use with those dies.This die stock fits the NPT 1/2" DIE PERFECTLY and is reasonably priced.
Gregory Stievenart
Reviewed in the United States on November 6, 2020
Worked like a charm on my M33 X 1.5 die.