Shopping Cart

Your cart is empty.

Your cart is empty.

Uxcell a11032500ux0133 KSD9700 NC 45C Bimetal Thermostat Temperature Switch (Pack of 2)

Free shipping on orders over $29.99

$5.11

$ 1 .99 $1.99

In Stock
  • Product name: temperature control switch; material: plastic, bimetal; model: Ksd9700
  • Type: nc(normal close); contact capacity: 250V 5A; max rated disconnection temperature: 45C/113F
  • Package Dimensions: 10.0 L x 2.2 H x 10.0 W (centimeters)
  • Country of Origin : China


Ul>ksd9700 product is a kind of thermostat which adopt the Bimetal disc as the temperature sensing element. The Bimetal disc is in free state and the contacts are closed when the electrical appliance is working in normal condition.When the ambient temperature raises to the preset operating temperature, the contacts open as the Bimetal disc deforms to jump when being heated, then the circuit is cut off to control the temperature.Then the contacts will close automatically to cut on the circuit when the electrical appliance is cooled down to the reset temperature.Widely used in home appliance and rsquo; use motor and electrical equipment, such as air Conditioner motor, transformer, thermal appliances, etc. .


Ashley H.
Reviewed in the United Kingdom on February 22, 2024
Who ever left the freezer door open?? It was only just open, no alarm, they have doe this 3 times. Last time was lucky, just had to defrost the freezer, previously had to replace the stats that heat the ice tray to drop the cubes. TIP, Make sure there are no bits of packaging sticking out & stopping the door from closing.
Gizzybean
Reviewed in the United States on January 2, 2023
At first hey work as intended, but none of them made it past 3 months though, they will just stay closed
Mag44
Reviewed in Canada on February 22, 2021
My wife's car idles very high on cold starts. It was a design flaw on '90s Toyotas. The remote start would disable as a result due to engine overpeed. I used this as part of a circuit to control RPM by blocking a vacuum line with a solenoid valve until the engine warmed up, at which point this switch opens, deenergizing the valve. It was easy to locate on a heater hose wrapped in a piece of split loom.
P. Pawlak
Reviewed in the United States on March 7, 2020
Kind of useless... it activates the pump every few seconds.I wanted to use it for a temperature trigger in the hot water system loop.Water is at about 50 C to 52 C, so 45 C was great setting. It activates just fine (although the temperature is off by about 3 degrees - it kicks in at 48 C to 49 C), but it resets at 46 C to 47 C.Nowhere close to reset of 30 as specs says. I thought, let it be at 35, 38, well, even 40. But one or two degrees below the trigger? Oh well, poor design.Oh, I tested both of them. They react same way.
nopenname
Reviewed in the United States on January 7, 2020
Used in my cat's Sleepy Pod heating pad- saved over $50 since I didn't have to replace the whole pad.
richard walsh
Reviewed in Canada on September 4, 2019
No info on use
Bobothegreat
Reviewed in the United States on December 9, 2019
This is exactly what i needed for an external power supply I am building. Functions as it should have when tested. will do business in the future!
EsQueue
Reviewed in the United States on October 15, 2019
I purchased these Normally Closed switches for a project. Unfortunately I actually needed Normally opened switches. However, I did test them and they both opened and closed correctly.
OMan
Reviewed in the United States on January 17, 2019
Leads are long enough.
Client d'
Reviewed in France on September 16, 2017
oui ces articles ont répondu à mon attente mais je ne les ai pas encore mis en service pour le moment.
Kunde
Reviewed in Germany on October 18, 2017
Kaputt nach zwei Wochen also sehr zuverlässig. Suche jetzt etwas höherwertiges.War als Sicherheit meines Vorlauf der Fußbodenheizung gedacht. Leider Fehlkauf
oliver dover,jr
Reviewed in the United States on July 19, 2015
good equipment
keevel
Reviewed in the United States on February 12, 2014
Used this thermal protector on the windings of a VitaMix VM0100A Blender. Easy to attach to windings with cable ties and wire into current flow with terminal lugs on stripped end of lead wires. Unless you need large quantities, the price is very good. Shipping was free, but took about 10 days or so.
Recommended Products

$125.00

$ 59 .99 $59.99

5.0
Select Option

$209.99

$ 82 .99 $82.99

4.6
Select Option

$149.74

$ 66 .99 $66.99

4.4
Select Option

$302.86

$ 99 .00 $99.00

4.3
Select Option

$109.39

$ 44 .99 $44.99

4.4
Select Option

$49.00

$ 22 .99 $22.99

4.3
Select Option