Your cart is empty.
Your cart is empty.Product Description
Furniture Screw-in Nut
- Inner hex head and the body trapezoidal design, the structure is more stable.
- Nut insert has internal and external threads. The internal thread is mainly for self-locking wood. Generally, it is a standard mechanical thread, which is convenient for connecting with other standard threaded fasteners.
Note
- The head with flange has a positioning function and is installed on the surface of the connecting piece; without flange is no positioning function and is installed inside the connecting piece.
- We have 4 types of nuts shown in the picture, please check the details and purchase according to your needs.
Installation Steps
- Measure the thickness of the board, the board is longer than the nut by more than 3mm.
- Example: The M6 nut is used with an M8 drill bit, and the drilling depth is the length of the nut.
- Use an M6 hexagon wrench to screw the nut clockwise into the board.
- Screw the nut until it is level with the wooden board.
M. Kennedy
Reviewed in the United States on June 1, 2024
half of them broke while trying to install into 3d printed parts.
siavash rezaei
Reviewed in Canada on March 20, 2024
These are not made of steel. They bend VERY easily while you try to screw them in. Some of them just split from where their cast line (yes they are casted) was, before applying any force!
I.B. Snackin
Reviewed in the United States on January 12, 2024
You never really know what you're going to get with some of these pieces of hardware. I used these as insets on my cnc mdf spoilboard for clamps using m5 screws. With my machine setup it would have been a grueling process to remove the spoilboard and install t nuts underneath. Tried these for a stopgap by drilling a hole first and then screwing these in. They fit REAL snug and I've had nothing but success with them so far when screwing into them to clamp material. It's a pretty good deal.
Jim Fancher
Reviewed in the United States on August 10, 2023
I bought these in M4 and M5 sizes for a speaker project I'm working on. They are a perfect fit and work well in MDF.
Anonymous User
Reviewed in the United States on December 10, 2023
Not much to say, just make sure you use the correct size bit and you should not have a problem.
Roger L.
Reviewed in the United States on March 24, 2022
Only needed one but it was well worth buying the pack.
alberto Ortega
Reviewed in the United States on February 8, 2021
Justo lo que nesesitaba. Muy buenos
Vancouverite
Reviewed in Canada on September 3, 2019
Bought these to fix a chair which had the old insert break. It fit, it didn't break. Not much more to say.
Recommended Products