Shopping Cart

Your cart is empty.

Your cart is empty.

VEVOR Bench Vise, 4.5-inch Jaw Width 3.3-inch Jaw Opening, 240-Degree Swivel Locking Base Multipurpose Vise w/Anvil, Heavy Duty Cast Iron Workbench Vise w/Bolts & Nuts, for Drilling, Pipe Cutting

Free shipping on orders over $29.99

$30.99

$ 15 .99 $15.99

In Stock

About this item

  • Built to Last: The swivel vise is forged from sturdy cast iron, with a powder coating on the surface for a rust-proof finish. High-quality nuts and screws increase durability. Replaceable serrated jaw plates are made of premium carbon steel for superior grip. Go above and beyond and knock out all those tough projects!
  • Large Anvil Area: The strong design comes in handier when you take the 1.9" x 1.7"/ 4.8 x 4.3 cm anvil into consideration. Jaw Width: 4.5"/ 11.5 cm. Jaw Opening: 3.3"/ 8.5 cm. Throat Depth: 2.3"/ 5.9 cm. Creates large clamping force during your work.
  • Considerate Vise Kit: The updated accessories of this vise are now more thoughtful than ever! Comes with a set of nuts, screws and a manual for hassle-free installation. No need to purchase extra fittings. They can be easily installed on your bench upon arrival. Set up and get to work!
  • Adapt to Any Situation: The base can rotate an entire 240°. You can choose to tighten it in any direction you need to work at your fingertips. Allows an ever greater degree of accuracy as there is no need to keep inserting and removing the piece you are working on.
  • Multifunctional Sturdy Jaw: The multi-jaw fits both flat material and pipe or tube workpiece. Pipe Clamping Diameter: 0.6"-1.8" / 1.5-4.5 cm. It is perfect for small projects and is highly adept at securing tools for sharpening, grinding, cutting, tapping, etc.



Product Description

Leave your work looking flawless with VEVOR!

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

The VEVOR swivel base vise is ideal for homes and workshops. It adopts high-strength ductile iron, a 240-degree rotation base, and a lockdown device for longer service life and more convenient use. You will be able to lock down all of your big projects and get to work in no time.

  • Yes, It comes with 4 bolts and nuts for your convenient installation.

  • Yes, the magnetic jaw pads are replaceable.

  • The smallest diameter pipe the vise will grip is 0.6" / 1.5 cm.

vise block

WRCC
Reviewed in the United States on March 2, 2025
Very useful and good quality for the price. Great for hobbyists.
werbs7
Reviewed in the United States on March 12, 2025
High quality and extremely strong this can be used for many many projects. Have been using for a couple months now and it has held up extremely well. Would recommend the product.
Woly.B
Reviewed in Canada on February 3, 2025
Good product works great.
KillaBubs
Reviewed in the United States on January 6, 2025
I haven’t mounted this vice up or used it yet, but everything seems OK so far. The paint quality looks like it might flake off early, but I really don’t care. If it loses that much pain looks that bad. I’ll just repaint myself.. but it seems decent and everything works on it and the threading is clean.
Jeremy H
Reviewed in the United States on January 31, 2025
Much better than I was expecting. Great value for the money.
bfreidah
Reviewed in the United States on January 30, 2025
Nice little vise for the price in an overpriced world.
Philippe
Reviewed in France on January 12, 2025
Super étau taille moyenne qui répond à tous mes besoins de bricolage.Le fait de pouvoir le pivoter est grandement appréciable et la fixation fournie est parfaite.
Kunde
Reviewed in Germany on March 20, 2024
Nachdem ich einen 100mm (Backengröße) blauen Mannesmann Schraubstock wegen vielen Beanstandungen zurückgesendet habe, habe ich mir diesen Schraubstock bestellt. Der passt, geht Leichtgängig hat keine Roststellen und der Lack blättert nicht ab. Sogar 8 Schrauben zum befestigen liegen bei. Ich bin mit diesem Schraubstock mehr als zu zufrieden.
Emile Vissers
Reviewed in the Netherlands on February 29, 2024
Een deugdelijk stuk gereedschap. Doordat hij draaibaar is heb ik hem op de verste hoek van de werkbank gemonteerd. Op die manier is het nooit een sta in de weg.
Silvia
Reviewed in Spain on December 1, 2024
No es para dar golpes fuertes ni nada parecido para eso hay que comprarse otra mejor, pero si solo vas a usarla como yo para sujetar cosas y para manipular es perfecta, veremos lo que dura, luego otra cosa, el tamaño es muy pequeño cosa que me gusta.si la usas para dar golpes fuertes te va durar media hora.
Steve G.
Reviewed in the United States on October 17, 2024
I can't speak enough on how well this product has been made. It's of the highest grade steel it's on a swivel and even came with bolts to secure it to the table. I highly recommend it if you're looking for advice to use every day. It's a great buy!
DTTECH
Reviewed in the United States on January 23, 2024
I am a retired automotive repair tech. I have seen many cheap vises in my time. I was wanting just a light duty vise with which to help with some of my hobby projects and to hold my mower blades for sharpening. I was SHOCKED when I found how heavy this little vise is! it operates very smoothly and holds well. The lock on the swivel also holds tight. I have seen many cheap vises that will loosen up on their own and rock back and forth on the swivel base even when the lever is locked down tight. This one does not do that at all. about the only "defect" I can see is that the replaceable jaws do not fit correctly on the sides. One is too long on one side and the other is too long on the other side. (see Photos) But that is not a huge issue in my opinion. Also, I tried "flipping" them to get them to line up with each other, but they cannot be installed upside down, so that squashed that idea. they could be ground flush with each other if it becomes an issue for some reason. Also, I found that the pipe gripping teeth below the main jaw held very well without having to tighten it too much on some 1/2 inch metal conduit. The anvil does not look like it would take a lot of abuse. it is kind of thin. There is not a lot of mass there. Although it could be used with a light hammer to straighten some small things, like maybe nails? All in all, I think that this little vise is fairly well built and is a very good value for the money.
William T.
Reviewed in the United States on January 22, 2024
This is a nice vise at a low price. Comes with hardware to install. Only shame is that washers are not included. Put some washers on the underside to ensure a good spread of mounting force. Also not included are soft, plastic jaws to put over the metal ones to hold things you don't want to scratch. Can be bought separately though.
Recommended Products

$19.89

$ 8 .99 $8.99

4.5
Select Option

$125.99

$ 55 .99 $55.99

4.3
Select Option

$5.46

$ 1 .99 $1.99

4.8
Select Option

$23.66

$ 10 .99 $10.99

4.5
Select Option

$9.99

$ 4 .99 $4.99

4.6
Select Option