Your cart is empty.
Your cart is empty.Product Description
More Products
We also produce other switch panels for Jeep, Truck and Boat.
JF_AR
Reviewed in the United States on August 25, 2024
I had this sitting on the bench to install for a couple years. By time I opened it I noticed what I thought was a protective plastic peeling off. But it is actually the panel itself coming apart.It works great. I really like that it has low battery protection, multiple modes, and multiple colors. Being able to adjust the brightness is nice as well. Install is easy.
GrouperMan
Reviewed in the United States on July 18, 2023
There is NO REASON to spend over $1k on a switch control (that is just plain stupid). However, you also do not want to trust the power distribution of your high end off road rig to a cheap knock off (fires happen often due to bad vehicle wiring components). There is a certain brand that many are buying and I just wonder how many shorts / fires will happen. In addition, who thinks solid-state relays are a good idea? if the board goes, you have to throw away the entire system and start over. Relays go bad and are dirt cheap to replace. I wanted a simple switch controller with "REAL" realys and Voswtich had it all. Great quality fit and finish and real relays. This is a great system!
Client d'
Reviewed in Canada on February 1, 2023
The media could not be loaded.
David
Reviewed in Canada on May 14, 2022
JimmyG
Reviewed in the United States on May 5, 2021
Works great! This had the legends we needed for our ‘12 Ram truck overland project, on a family friendly budget. (Ditch lights, bumper lights, left/right alley lights, rear lights, air compressor). We installed the switch pad to be part of a RamMounts arm T track system. The relays and fuses included puts peace of mind that everything is fused safely and not having a lot of “hot” wires coming thru the firewall, risking a short/electrical fire while on the trails
eyad shamma
Reviewed in the United Arab Emirates on December 11, 2021
Just amazing
Christopher N.
Reviewed in the United States on December 31, 2020
I had several small switches drilled into the dash of my truck. But they were only rated at 5 amps. I always worried about causing a fire. And they were hard to label and identify at night. I started building a relay box of my own and that quickly got expensive. This thing is convenient and looks a lot better under the hood than the 8 inline fuses attached to my battery + and the big wad of grounds. Was able to remove big bundle of wires going into the firewall/under the dash.At the same time I ordered this, I ordered a prewired 6 switch box with no relays. I looked at both of them when they arrived and gladly installed the Voswitch. Quality is great. I mounted mine to the top of my 24v Cummins.
Dave
Reviewed in the United States on January 6, 2020
I have a 2016 Sierra with several additions including an auxiliary battery, winch, front and rear LED lights, and an air horn. Hey, I’m from Alabama what did you expect? I quickly ran out of space for switches on the dash, and did not want to cut any holes in it either. There was also a large number of extra wiring harnesses, inline fuses, and relays. I decided to install a switch panel that integrates everything in one panel. I needed one that can change colors to match my red dash lights, dim, and also have the ability to make the switches momentary, you know, for my air horn! There were a ton of different kits out there, but this was the only one that offered all of the features I was looking for. It also included a pre-populated waterproof enclosure that came with relays and fuses.The kit came very well packaged and with all necessary installation items. I was able to mount the panel to the same spot I previously had my switches installed. When you install the unit, just take your time and pay attention to the directions. I used wire loom and created a new harness for the wiring from my accessories to try and keeps installation as clean as possible. When done, I had eliminated a big wad of wires from under the hood and have only a single control cable going into the cab which is not visible. When you look at the pics of under the hood, the red wire that is rolled up is the remote turn on wire that hooks to a circuit that is on when the ignition is on. I currently have it installed using the power switch on the panel to turn it on and off. I ran out of time to run that last wire and will address that in the future. The relay box has a set of dip switches that enable either manual on/off or on with accessory power. Either way, the unit can be turned off with the power switch on the control panel and will remain off until turned on via the switch. I hope this review helps.
Ronnie H.
Reviewed in the United States on October 22, 2019
This product works just as advertised and does it well. Adding accessories has never been easier and the box where all the connections are made has been completely water tight since I’ve owned it.Note: I did learn a lesson about the switch panel itself, the hard way. It is waterproof but it is not power washer proof. I never sprayed directly at it up close but it did get water in it which caused it to stop lighting up and working altogether. I contacted the seller and they were quick to reply and although it was my fault they warned me about the pressure washer and are sending me a new panel. I’ll just remove it from the machine from now on when I wash it. Do not hesitate to buy this! Well worth the money and the customer service is awesome 👍🏼👍🏼
Recommended Products
$9.50
$ 3 .99 $3.99
$46.73
$ 20 .99 $20.99