- Home
-
All Categories
- Automotive
- Camera & Photo Products
- Arts, Crafts & Sewing
- Patio, Lawn & Garden
- Toys & Games
- Kitchen & Dining
- Industrial & Scientific
- Home & Kitchen
- Clothing, Shoes & Jewelry
- Tools & Home Improvement
- Electronics
- Sports & Outdoors
- Office Products
- Musical Instruments
- Video Games
- Computers & Accessories
- Pet Supplies
- Sports Collectibles
- Appliances
- Grocery & Gourmet Food
- Health & Household
- Baby
- Cell Phones & Accessories
- Beauty & Personal Care
- Software
- Payment
- About Us
- FAQ
- Privacy Notice
- Shipping & Returns
- Contact Us
Your cart is empty.
Your cart is empty.Product Description


Salt Cell T-9 Feature
- Product Name : Pool Chlorinator;
- Product Type : Turbo Salt Cell;
- Model Number : T-9/W3T-CELL-9/GLX-CELL-9-W;
- Pool Type : In Ground or Above Ground;
- Cord Size : 15 FT;
- Compatibility : for Salt & Swim, for AquaRite, for AquaTrol Chlorination Systems;
- Right-sized for New and Existing Swimming Pools Up to 25000 Gallons;
- Save Up to 50% or More Compared to Conventional Chlorine;
- Reliable Performance.

W3T-CELL-15 Turbo Salt Cell Installation
- CONFIGURATION is necessary with the following models:
- for AQR (Aqua Rite - all 2009 or later) - firmware version 1.5 or later;
- for AQR-PRO (Aqua Rite Pro);
- for PL-P-4 (Pro Logic P4);
- for PL-PS-x (Pro Logic PS);
- for AQ-LOGIC-P-4 (Pro Logic P4);
- for AQ-LOGIC-PS-x (Pro Logic PS);
- NO CONFIGURATION is neccessary with the following models:
- AQ-RITE (Aqua Rite - 2008 and earlier) - firmware earlier than version 1.5;
- AQ-RITE-XL (Aqua Rite XL).
- Connecting to an AQR:
- Slide the Main Switch to the “Auto” position;
- Push the Diagnostic button repeatedly until “t-xx” appears on the display (“t-15” is the factory default). If “t-15” is displayed, skip to step 4;
- To change cell type, slide the Main Switch from “Auto” to “Super Chlorinate” and back to “Auto”. Repeat this process until the “t-15” is displayed;
- Push the Diagnostic button to exit.
- Connecting to an AQR-PRO:
- Access the Settings Menu by pushing the “Settings” button;
- Push “>” until Chlor. Config is displayed, then push “+”;
- Push “>” repeatedly until “Cell Type” is displayed;
- Push “+” or “-” until “T-CELL-15” is displayed;
- Exit Settings Menu by pushing the “Info” button.
- Connecting to an AQ-LOGIC-P-4, AQ-LOGIC-PS-x, PL-P-4 or PL-PS-x:
- Enter the Configuration Menu;
- Push “>” until Chlor. Config is displayed, then push “+”;
- With the Chlorinator Enabled, push “>” repeatedly until “Cell Type” is displayed;
- Push “+” or “-” until “T-CELL-15” is displayed;
- Exit Settings Menu by pushing the “Menu” button.
- NOTE : The Amount Of Chlorine Produced By Your Salt Chlorine Generating System Is Dependent On The Length Of Time That Your Filter Pump Runs Every Day. So, Your Chlorination Setting Should Be Matched To The Filter Pump Run Time Of Your Pool.
- Whether you plan to INCREASE or DECREASE the filter pump cycle on your pool, by properly adjusting your setting, you are preventing the over-chlorination or under-chlorination of your pool.
- For example, If you plan on doubling the filter pump operating time (say from 8 hours/day to 16 hours/day), then reduce your chlorination setting by a factor of 2 (say from 50% to 25%). If you plan to triple your filter pump operating time, then reduce your chlorination setting by a factor of 3. Likewise, if you reduce your filter pump operating time (say from 12 hours/day to 8 hours/day), then increase your chlorination setting by a factor of 1.5 (i.e. 12/8=1.5).

$89.99 $89.99
$ 38 .99 $38.99
$80.95 $80.95
$ 37 .99 $37.99
$16.53 $16.53
$ 7 .99 $7.99