Shopping Cart

Your cart is empty.

Your cart is empty.

waka 3 Pack 55mm Center Pinch Lens Cap Cover with Tether for Nikon D3500 D3400 D5600 D7500 with AF-P 18-55mm f/3.5-5.6G VR Kit Lens & Other 55mm Thread Lenses (Not for Canon EF-S 18-55mm Lens)

Free shipping on orders over $29.99

$5.21

$ 1 .99 $1.99

In Stock

About this item

  • Unique design lens cap that keeps lens 100% sealed and protect your lens from water, dust and scratches. While the lens cap keeper tether to prevent loss of your lens cap. 3 pack in one set.
  • Snap-on center pinch design allows easy attachment and removal, even with a lens hood or lens filter in place.
  • Compatible with any lenses with 55mm lens thread size. 【PLEASE VERIFY YOUR LENS THREAD SIZE BEFORE ORDERING】 The size will be marked somewhere on the lens barrel and is always proceeded by a "Φ" (diameter) symbol. For example: Φ55 = 55mm lens thread size.
  • Truly premium quality lens cap bundle, Ideal replace Nikon LC-55 front lens cap or other 55mm front lens cap for Canon, Nikon, Sony etc DSLR cameras. (Attention: Some customers bought this lens cap for their Canon EF-S 18-55mm lens, please note this 55mm lens cap does not fit this lens, you should take the 58mm lens cap for the Canon EF-S 18-55mm lens)
  • Free premium quality microfiber cleaning cloth 6x7" included. Compatiable with any lenses with 55mm lens thread size, such like Nikon AF-P DX NIKKOR 18-55mm f/3.5-5.6G VR Lens,Sony FE 28-70mm f/3.5-5.6 OSS Lens,Sony E 18-135mm f/3.5-5.6 OSS Lens,Sony FE 50mm f/2.8 Macro Lens,Canon EF-M 11-22mm f/4-5.6 IS STM Lens,etc.



Product Description

IMPORTANT: Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always proceeded by a "Φ" (diameter) symbol.

For example: 'Ø'58mm=58mm lens thread size.

Don't confused with the focal distance of your lens (18-55mm).

waka focus on DSLR camera accessories. We deliver unique design and high quality products since 2015. Our goal is to make sure that every choice you make from us meet your demand or beyond your expection.

Lens cap

Our lens cap bundle solves these two problems:

1, The easily losses problem. Simply use the elastic loop over the camera lens so it’s easy to find. And cap leash is attached to lens cap via the hole in it, most others on market are attached via a small adhesive tab in front of cap, that makes it easily to fall off.

2, Premium quality as original manufactory. Original lens caps like Canon/Nikon/Sony don’t have hole in it to protect lens from dust, most third party lens caps on market have hole to attach cap keeper but just expose the lens to dust and scratches damage risk. Our lens cap keeps lens 100% sealed when mounted on while still offer a hole in it due to our complicate dual layer structures, so you still get 100% protection as original manufacturer lens caps.

3 Pack Lens Cap Bundle with Lens Keeper for Canon Nikon Sony etc DSLR Cameras

Choose the correct thread size

IMPORTANT: Read this before buy!

Your lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap.

You can find your lens thread size on your camera lens front or side following by symbol 'Ø' to choose the CORRECT SIZE.

For example: 'Ø'58mm=58mm lens thread size.

3 Pack Lens Cap Bundle with Lens Keeper

Specification:

– Material: High impact plastic

– Color: Black

– Center pinch design allows easy attachment and removal, even with a lens hood in place.

Package Contains:

– Lens cap x 3pcs;

– Lens cap keeper leash x 3pcs;

– Premium microfiber lens cleaning cloth x 1pcs;


Ray
Reviewed in the United States on February 26, 2025
The lens cap and leash keeper are exactly as described and just what I was looking for to protect my lens on my camera. What I like about the leash keeper it fits around the lens very snug and secure and doesn't fall off my camera. The caps for the lens are also very good and well made. It comes with a microfiber cloth which was very nice and also a tool if you need it to install the string. Very pleased and satisfied with this product.
FCgraham
Reviewed in the United States on January 21, 2025
This product replaced my original Nikon cover, and it fit perfectly. The product arrived on time and was packaged well.
Wandering Rogue
Reviewed in the United States on May 17, 2024
I purchased these to replace a missing lens cap on a Nikon Nikkor 18-70 mm lens. I am very happy with these lens caps. The spring in the pinch apparatus has just the right amount of tension. Not difficult to pinch, but enough outward force to keep the cap firmly in place. The caps easily slot into place and provide good coverage.Many reviews discuss difficulty in attaching the tether to the cap. Maybe they've changed the design since those reviews were written, but I had very little difficulty. In fact, I was able to attach the tether in under a minute (and would have been quicker if I had used more light). Looking at the other reviews, I think that they were using the helper tool incorrectly. Many of the reviews stated that the tool was too big to fit into the hole in the top of the cap, but that's not where it's supposed to be used. The tool (essentially the same as the tools used to open the sim card drawer on a cell phone) is meant to be used for retrieving the end of the tether from the side of the cap, not for pushing the tether into the hole on top of the cap The tether, which is a loop, attaches by being inserted into a small hole in the top of the cap, and then pulling the inserted end out an opening in the side of the cap (you then pass the part of the tether that goes around the lens through the end of the loop retrieved from the side of the cap). I folded the thin string loop at the top of the loop (basically, pinched the loop to make it narrower), and easily inserted the loop into the hole in the top of the cap. When this is done, you can see the loop hanging down in the slot on the side of cap. Then I used the tool to get behind the loop and pull it out of the hole. In this regard, it might be better if the tool had a little hook on the end, rather then just being straight. Either way, it was pretty easy to fish out the loop.As I said, I am very happy with these caps, and would recommend them to others.
Customer
Reviewed in Canada on February 15, 2024
Fit my lens
Bill
Reviewed in the United States on December 2, 2024
works great
Devani Marie
Reviewed in the United States on November 14, 2024
They work great. But I only received two lens caps instead of three.
KBP I
Reviewed in the United States on October 14, 2024
Lens covers -- they either do what they're supposed or don't. These work fine. I've been pleased with these.
"Badger"
Reviewed in the United States on August 3, 2022
Great price, sturdy and clip onto camera lens well. Should hold. Retention cord a great idea (lost my original cap, might not have with cord) One problem: You have to push the tiny cord through a very tiny hole to attach it to lens cap. They do provide a pin to assist. However you'll need a magnifying glass and patience... no problem. BUT the hole in one of the caps was blocked with plastic - no way to push it through. I had to get creative and clear out the hole to use it. Overall good value, despite the challenge of attachment cord.
Unknown
Reviewed in the United States on July 9, 2022
I was looking for a cheap cap to throw in my bag as a temporary backup in case a lens cap got lost on a trip. I was very pleasantly surprised at how well these are made. They fit well and seem secure, even with a filter attached, and the clips work smoothly. The look and feel are not quite as refined as my Nikon lens cap, but they would be perfectly suitable as a replacement, and the 3-pack was less than half the price of a single OEM cap. Would definitely recommend!
Thomasius
Reviewed in Germany on April 6, 2022
Mein originaler Sony Objektivdeckel Ø 55 mm ist heruntergefallen und die Plastikfedern waren sofort gebrochen. Kein Wunder bei dieser filigranen Konstruktion.Für den Originalpreis von Sony 1 Stück, habe ich nun 3 Stück von "Waka" erhalten. Die Qualität der Deckel sieht super aus und scheint wesentlich stabiler zu sein. Zur Haltbarkeit kann ich jetzt noch nichts sagen.Er sitzt perfekt und fest auf meinen Objektiv. Ein Putztuch sowie je ein Halteband mit Einfädelhilfe war auch dabei. Kann ich nur weiter empfelen.
MarkGD
Reviewed in the United Kingdom on May 20, 2019
Perfect replacement for the flimsy and fragile plastic spring system that Nikon provided with their branded one. These fit perfectly (both on the lens and my UV-C (static) and PL (rotatable) filters. Spares if needed and the straps fit nicely onto the lens (not too tightly). In addition, the lens strap fits nicely to the cap without creating a gap between the lens and cap. Three caps as well so hopefully will last me a good while before needing any further replacements!
morfeus2010
Reviewed in France on February 7, 2018
Cache objectif au moins aussi protecteur que ceux d'origine, tiennent bien sur les objectifs, ne se décroche pas au moindre petit choc, je recommande fortement !!
Renaud
Reviewed in France on November 21, 2017
Multiples tentative d'accrocher ce cache à divers objectifs ...Ne tient pas bien ou pas du tout.Si vous avez un pare soleil n'y pensez même pas ...Un achat vraiment inutile en ce qui me concerne
Recommended Products

$18.88

$ 7 .99 $7.99

4.8
Select Option