Your cart is empty.
Your cart is empty. Specification
7/8"-1 1/8" Motorcycle Handlebar Dial Clock
Condition:Brand New,all aluminum alloy shell
Color: Black Mount & Black/Sliver/Red Surface
Material: High Quality Aluminium Alloy,SS304
100% Waterproof, Shock resistant, Grow in dark
Battery came installed
Fit most of motorcycles,for Harley / Cruiser / Chopper / Custom with 7/8" to 1 1/8" handlebar
Package included: 1 x Motorcycle Handlebar Dial Clock;2 x hexagonal screwdriver;1 x 3M double-sided adhesive tape
How to install:
1. Put the double side tape into the mount.
2. Put the clock into the mount.
3. Tightening screw.
4. Screw-in screw fixed on the mount.
Service:
Please feel free to contact us if there is any question about the item. We will reply to you at the first time within 24 hours. We will surely give you a satisfactory answer.
Frank D.
Reviewed in the United States on February 22, 2025
This item is outstanding, in looks quality and installation tools. Hardware supplied to accommodate various handlebar sizes,
William Z Dowdle
Reviewed in the United States on June 16, 2024
Very sturdy and works great.
Bill
Reviewed in the United States on December 15, 2024
So far, very nice and attractive clock. We'll see how well it keeps time and how well it stands up to bicycling vibration and shock. No instruction sheet so here is what you do with what you get:(1) Pull the knob out to set the time; then push it back in. Just like a wristwatch if you know what those are.(2) Peel off the paper on the two rubber strips and apply to the case and bracket grooves. The radius of the grooves is larger than any handlebar, so these strips are needed to grip and avoid scratching up the handlebar.(3) A thin double sided adhesive disc is provided. It has no purpose. You can either (a) throw it away, (b) remove the paper on one side and stick it to the bottom of the case, or (c) use it as-is between the clock and case. There is nothing wrong with having a thin gap there.(4) Drop the clock into the case and rotate it to where you want it. Secure it with one of two set screws provided. (The second set screw is a spare.)(5) Align the case and bracket on the handle bar and tighten with either the long or short allen head screws, depending on the diameter of your handlebar. Be sure to position the case such that you have access to the set screw with the small allen wrench. Note: the set screw threads are not straight threads. They or the threads cut into the case are slightly tapered. Thus the set screw goes in tight and WILL NOT back out with vibration. (Somebody did something right! Straight threads would have rendered this thing useless.)(6) Position the clock in its final position and tighten the allen head screws evenly with the large allen wrench, compressing the rubber strips. Voila, a beautiful clock!Another reviewer has posted excellent instructions for changing the battery.Note: This appears water resistant (can tolerate splashing or a sprinkle) but I doubt it is waterproof. There is no gasket around the bezel, though one could easily make one. It is not sold as waterproof.
Jerry W. Scott
Reviewed in the United States on November 15, 2024
Not a big problem but there are no instructions on assembly and I can’t figure out how to change battery once this battery is discharged. A nice looking clock. Fit handlebars easily. If the seller would include at least a diagram for using the parts that come with it that would be a big help. I’d give it five stars otherwise.
Bill S.
Reviewed in the United States on October 7, 2024
I purchased this twice for motor scooters. First time it wouldn't fit the style of handle bars (not the fault of the clock) and the second fit the new scooter I purchased. It fit fine, was easy to see when riding, but it quit keeping accurate time less than 30 days after purchase. It didn't stop completely, but started losing time and about 25 days after use, it was over an hour behind. May have been the battery, but didn't want to take a chance. Another three days and I couldn't have sent it back and been stuck for almost $20.00. Nice looking and easy to read, but I can't recommend it.
MVMike
Reviewed in the United States on June 19, 2023
Like the Analog Look-n-Feel vs the old digital clock I had that wasn't waterproof nor accurate. Like the fact the mount clamp can be reversed for the smaller cross bar. (came with long and short S.S. bolts) Holds really tight using the rubber pad in the mounting. No instructions so Im assuming the battery can be changed without losing waterproof ability. Clock face looks really nice. ( and the color matches my KLR650 ). ** 1 YR UPDATE - YES, the battery is perfectly changeable. (See Pics) Pop the rear cover with a knife blade near the Crown. Lift off the plastic retainer, lift out the battery, install new batt, re-align cover with notch near the Crown, press down to start it on, then flip clock onto a soft cloth on a counter top and push down till it "Snaps". My Clock sped up, gaining time as the battery weakened.
G. G.
Reviewed in the United States on March 1, 2023
I like the look and installation ease of the clock but after two months it stopped working. It cannot handle the vibration of being on a moped. Hands stop moving after a few hours. Battery has been replaced several times but it still stops, hands not working until I cycle clock setting button.I do not recommend because it is not rugged enough to handle its intended use.
CTC
Reviewed in Canada on October 23, 2023
I had high hopes for this. It seemed solid and was just what I needed. Unfortunately, after just a one hour ride on paved roads, the screw came loose and the clock popped out of its housing. I was able to save it while riding and pop it in my jacket, but I don't have additional screws to try again. Highly recommend you use blue (not red) loctite threadlock on the screw to keep it from coming loose due to normal vibrations.
Howard Dack
Reviewed in Canada on December 7, 2022
Nicely designed and nicely finished, easy to install
Randy Hardington
Reviewed in Canada on November 22, 2022
Works great! Accurate and glows in the dark. Looks good too! I’m impressed!
Nomada
Reviewed in Mexico on November 14, 2022
El reloj está bien solo que no se ilumina en la noche
George Charron
Reviewed in Canada on June 9, 2020
It came in very fast....in less than a week! I find the clock doesn't fit well in the cup. I had to remove the adhesive tape so it would fit better but I think I have it secure enough. It's nice looking clock...easy to read. I just hope it last longer than the other one I had but that one was much cheaper. I always say that you get what you pay for!
Keith Hamm
Reviewed in the United States on August 25, 2018
This one's a bit pricey, but it sure is a nice clock for the money. Fit's my Suzuki Intruder. Easy to install. Comes with mounting hardware and 2 lock screws and hex wrench. The screws both go in the same hole, one after the other to hold the clock in the holder. There's double faced tape in the box but I didn't stick the clock on with it - just used it as a pad under the clock. Had the clock on the bike for a few weeks now and it keeps perfect time. You can mount the clock in the holder to fit most viewing angles. It is NOT illuminated and doesn't glow in the dark, but the hands are easy enough to see just from my instrument lights.I've had this on my Suzuki Intruder for 2 years now. Same battery. Stored the bike in the garage over the winters. When I pulled the bike out last spring, it had kept the time perfectly! I am impressed!Update April 2021. Well, the battery finally died.... Since I bought it in August of 2018, I'm OK with that. I tried to replace the battery, but it's really small and I just couldn't make it happen. So I'll buy another one. Still really impressed!
Recommended Products
